What are the cargo compartment dimensions of the Dongfeng Xiaokang C31?

What is the difference between Pajero V97 and V93?

The difference between Pajero V97 and V93 lies in their engine displacement: the Pajero V97 has a 3.8-liter engine, while the Pajero V93 is equipped with a 3.0-liter engine. The Pajero is a mid-to-large SUV produced by Mitsubishi, with body dimensions of 4900mm in length, 1845mm in width, and 1900mm in height, and a wheelbase of 2780mm. In terms of power, the Pajero is powered by a 3.0-liter V6 naturally aspirated engine, paired with a 5-speed automatic transmission, delivering a maximum power of 128kW, maximum horsepower of 174PS, and maximum torque of 255Nm.

1

3

Share

What Does the Kettle Symbol on the Car Mean?

The kettle symbol on the car is the engine oil pressure warning light, which indicates whether the oil pressure is normal. If this light stays on or flashes while driving normally, it is important to check whether the engine is low on oil and perform timely inspections and repairs to avoid potential hazards. Reasons for the oil pressure warning light staying on: 1. Insufficient engine oil level; 2. Dirty or overly viscous oil; 3. Oil thinning due to high engine temperature; 4. Oil pipe leakage, oil pump damage, or excessive wear of components; 5. Excessive clearance between the crankshaft and bearings; 6. Weak, stuck, or damaged springs or steel balls in the pressure relief valve; 7. Faulty oil pressure sensor, gauge, or circuit causing low oil pressure.

16

2

Share

Why Do Brake Pads Grind Against Brake Discs?

Reasons for brake pads grinding against brake discs: 1. There are foreign objects between the brake pads and brake discs; 2. Use of inferior quality brake pads; 3. Inconsistent size of brake pad friction blocks or misalignment during installation; 4. Poor installation of brake pad shims or lack of lubricant on the shims. The basic components in the braking system that require regular maintenance include brake pads, brake discs, and brake fluid. Brake pads are critical safety components in a car's braking system, and the effectiveness of braking largely depends on them. The friction generated between the brake pads and the wheel drum or disc converts the kinetic energy of the moving vehicle into heat energy during the friction process, thereby achieving the purpose of slowing down or stopping the vehicle.

16

0

Share

What are the possible reasons for no response when inserting and starting the car key?

No response when inserting and starting the car key may be due to a dead car battery or issues with the vehicle's ignition system. First, check the car battery. If the battery is completely drained, you'll need to use an external power source for a jump start. If the car can start through jump-starting, it indicates the problem is caused by a dead battery. Check whether there is power in the live wire entering the ignition switch. If there's no power, it means the ignition switch is faulty and needs repair. If it's an electrical circuit issue, common faults that cause the car not to start or respond include: blown fuse, open circuit in the high-voltage coil, open circuit in the low-voltage circuit, detached central ignition wire, leaking distributor rotor, or damaged spark plugs.

13

3

Share

What is Turbocharging?

Turbocharging is a technology that utilizes the exhaust gases generated by internal combustion engine operation to drive an air compressor. A turbocharged engine relies on a turbocharger to increase the engine's air intake. Essentially, a turbocharger is an air compressor that uses the engine's exhaust gases as power to drive a turbine in the turbine housing. The turbine, in turn, drives a coaxial impeller, which compresses fresh air delivered through the air filter pipe and then sends it into the cylinders. As the engine speed increases, the exhaust gas flow rate and turbine speed also accelerate synchronously, enhancing the degree of air compression. Consequently, the engine's air intake increases accordingly, thereby boosting the engine's output power.

2

5

Share

What is the minimum ground clearance of the Geely Vision X6?

The minimum ground clearance of the Geely Vision X6 is 175mm. The minimum ground clearance refers to the distance between the lowest protruding part of the vehicle's chassis and the level ground when the car is fully loaded (with the maximum allowable load capacity). The Geely Vision X6 is a compact SUV under the Geely brand, with body dimensions of 4546mm in length, 1834mm in width, and 1715mm in height, and a wheelbase of 2661mm. The Geely Vision X6 is equipped with a four-cylinder engine, delivering a maximum power of 104kW and a maximum torque of 235Nm. It features multi-point electronic fuel injection technology, using an aluminum alloy cylinder head and a cast iron cylinder block. The vehicle is equipped with safety features such as full-speed ACC adaptive cruise control, a 360-degree 3D panoramic imaging system, an 8-in-1 Bosch ESP electronic stability program, and a comprehensive safety warning system.

2

1

Share

What are the cargo compartment dimensions of the Dongfeng Xiaokang C31?

What is the difference between Pajero V97 and V93?

What Does the Kettle Symbol on the Car Mean?

Why Do Brake Pads Grind Against Brake Discs?

What are the possible reasons for no response when inserting and starting the car key?

What is Turbocharging?

What is the minimum ground clearance of the Geely Vision X6?

How to Turn on the Heater in Qoros 5?

How to Lift Up BMW Windshield Wipers?

How to Check if a Car is Within the Warranty Period?

What Type of Fuel Should China VI Vehicles Use?