What Are the Car Tire Maintenance Items?

1 Answers
LaAbigail
07/29/25 9:15pm
There are 6 items for car tire maintenance: 1. Tire rotation - It is recommended to rotate the tire positions every 10,000 kilometers to equalize tire fatigue, prevent uneven wear, and extend tire service life; 2. Four-wheel alignment - It is recommended to check every 30,000 kilometers to reduce abnormal tire wear caused by changes in four-wheel alignment parameters; 3. Tire pressure inspection - Check at least once a month. If the tire pressure decreases too quickly, please visit a local tire shop for inspection to avoid greater damage to the tires; 4. Tire dynamic balance inspection - This is to prevent steering wobble when the car speed increases. If the steering wheel wobbles when the car speed exceeds 70 km/h, a tire dynamic balance inspection should be performed promptly; 5. Tire tread depth inspection - When the tire wears down to the wear indicator mark, the tire must be replaced. Using tires beyond the wear indicator mark is very dangerous when driving on wet surfaces because the drainage performance is greatly reduced, which will seriously affect wet surface grip; 6. Tires are rubber products and will age or crack over time. If aging or cracking is found during inspection, they should be replaced promptly.
Was this review help?
2
1
Share
More Forum Discussions

How to Turn on the High Beam of the New Jetta?

The method to turn on the high beam of the New Jetta: 1. Locate the light switch, rotate the middle knob to the right to align with the first light mark to turn on the position light; 2. After turning on the position light, rotate the switch further to the right to turn on the low beam; 3. With the low beam on, you can then activate the high beam. This requires coordination with the light signal switch on the steering wheel. Push the switch on the left side of the steering wheel forward and hold it in place to turn on the high beam. The New Jetta has a body size of 4501mm in length, 1704mm in width, and 1469mm in height, with a wheelbase of 2604mm. The car features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of compound torsion beam non-independent suspension. It is equipped with an EA211 1.4T turbocharged engine, delivering a maximum power of 110kw and a maximum torque of 250nm.
5
4
Share

What items should be included in the second car maintenance?

Items to be included in the second car maintenance: 1. Change engine oil, oil filter, and fuel filter; 2. Check whether the tire pressure is normal; 3. Check whether the suspension arms and shock absorbers are securely fixed and functioning properly; 4. Check whether the wheel hub bearings have excessive heat after driving; 5. Check whether the engine's starting, operation, exhaust, water temperature, and oil pressure meet the requirements after the three-clean and three-filter operations; 6. Check whether the car's speed is stable, whether there is any abnormal noise, and the tension of each belt; 7. Check for any leakage of water, oil, electricity, or gas. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Modern car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.
14
5
Share

How to Use the Gears of Audi A6?

Audi A6 gear usage methods are as follows: P gear is used when parking and turning off the engine; R gear is used when reversing; N gear is used for short stops without turning off the engine; D gear is used for driving forward; S gear is used for aggressive driving or overtaking. Taking the Audi A6 2004 1.8T manual basic model as an example: The manufacturer of this car is FAW-Volkswagen Audi, its class is a mid-to-large-sized car, and its energy type is gasoline. The car's length, width, and height are 4886mm, 1810mm, and 1475mm respectively, with a wheelbase of 2850mm. The body type is a 4-door, 5-seater sedan, equipped with a 5-speed manual transmission, and has a top speed of 208 kilometers per hour.
16
5
Share

How Often Should Car Antifreeze Be Refilled?

Car antifreeze should be refilled every two years or 40,000 kilometers, whichever comes first. The method for changing antifreeze: 1. Locate the antifreeze reservoir and follow the storage tank to find the lower hose; 2. Find the position of the hose clamp, use clamp pliers to grip the clamp, squeeze the pliers firmly to open the clamp and lock it; 3. Pull the rubber hose forcefully, and the antifreeze will flow out; 4. After the antifreeze has completely drained, you can refill with new antifreeze or clean the system before refilling. The full name of antifreeze should be antifreeze coolant, meaning it is a coolant with antifreeze properties. It prevents the coolant from freezing and expanding in cold winter conditions, which could crack the radiator or damage the engine cylinder block or head. Antifreeze also reduces corrosion in the engine cooling system and has anti-corrosion and rust-removal functions.
12
0
Share

What Causes Loud Noise When the Car Air Conditioner is On?

Reasons for loud noise when the car air conditioner is on: 1. The fan blades inside the air conditioner are deformed and need to be replaced; 2. The motor of the fan inside the air conditioner is faulty, it is recommended to repair or replace the fan; 3. There is excessive dirt inside the air conditioner, it is recommended to clean the air conditioner. The car air conditioning refrigeration system consists of a compressor, condenser, liquid storage dryer, expansion valve, evaporator, and blower, all connected by copper pipes and high-pressure rubber hoses to form a sealed system. When the refrigeration system is operating, the refrigerant circulates in different states within the sealed system. The car air conditioner is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to a better state, providing a comfortable riding environment for passengers, reducing travel fatigue, creating good working conditions for the driver, and ensuring safe driving.
1
5
Share

Why does a Mercedes-Benz suddenly not accelerate when stepping on the gas pedal while driving?

When a Mercedes-Benz suddenly does not accelerate when stepping on the gas pedal while driving, it is usually due to a dirty throttle position sensor or voltage imbalance causing an electronic throttle malfunction. Taking the Mercedes-Benz E-Class 2021 E260L Sport as an example: The manufacturer of this car is Beijing Benz, classified as a mid-to-large-sized car, equipped with a 9-speed automatic transmission, and has a body type of a 4-door, 5-seat sedan. Its top speed is 230 km/h, and it accelerates from 0 to 100 km/h in 8.7 seconds. The car's length, width, and height are 5078mm, 1860mm, and 1484mm respectively, with a wheelbase of 3079mm. It features rear-wheel drive, a multi-link independent front suspension, a multi-link independent rear suspension, electric power steering, and a unibody structure.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.