What Are the Car Tire Maintenance Items?

2 Answers
DelGenesis
07/29/25 4:44am
Car tire maintenance items include: checking all tires including the spare tire, and inspecting tire pressure for any bulges, cracks, cuts, punctures, or abnormal tread wear. Below is information about car tire maintenance: 1. Tire inspection should be conducted at least once a month. Check the tire pressure when the tires are cold, including the spare tire. 2. If the owner notices that the tire pressure decreases too quickly, the cause should be identified promptly instead of simply going to a tire shop for inflation. The inflation pressure must follow the value specified by the car manufacturer. 3. The tread wear indicator is located at 1.6 mm remaining groove depth. When the tire wears down to this indicator, it must be replaced. Driving with tires worn beyond the indicator is very dangerous on wet roads because the drainage performance is significantly reduced, severely affecting wet traction. 4. Regularly check wheel alignment and balance. Especially when excessive vehicle vibration is noticed, it may indicate poor wheel alignment or imbalance. These conditions not only shorten tire life but also affect vehicle handling and endanger driving safety. 5. Special attention should be paid when replacing tires to ensure that the tires on the same axle are uniform in specifications, structure, brand, and tread pattern.
Was this review help?
14
0
Share
MacAva
08/12/25 8:25am
As a seasoned long-distance driver, tire maintenance is as essential to me as daily brushing. I typically check tire pressure once a month using an onboard gauge or free equipment at gas stations, increasing frequency during significant temperature changes—incorrect pressure leads to uneven wear and blowout risks. Additionally, I rotate my tires every six months, swapping front and rear positions to balance wear, extending their life by two to three years. Tread depth checks are mandatory; I use a one-yuan coin—if treads are shallower than 1.6mm, it’s replacement time. For cleaning, I wipe stains with a soft cloth to prevent oil from corroding rubber. Balancing and alignment are also critical—a professional check prevents veering. Adjusting pressure for seasonal shifts and avoiding overloading saves me hefty repair costs. Overall, quality tires are a car’s foundation, and regular upkeep ensures safety and value.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

Is the Car Ignition Enhancer Useful?

Car ignition enhancers are useful, and their functions include: 1. Enhancing engine ignition efficiency to save fuel; 2. Increasing horsepower and torque; 3. Providing faster and smoother acceleration response; 4. Improving the vehicle's climbing ability; 5. Increasing headlight brightness when turned on at night; 6. Extending battery life. The installation method for an ignition enhancer is as follows: 1. Select a low-power boost and voltage regulator module; 2. Connect the booster's power supply voltage package in series from the ignition coil fuse position, removing the original car's fuse; 3. Solder a lead wire to each of the two fuses, serving as the booster's power supply connection and the output voltage input line after boosting; 4. Insert the other end of the fuses into the corresponding positions of the car's original fuse, and ground the booster's negative wire.
8
1
Share

How to Reverse a Manual Transmission Car?

Manual transmission car reversing method: Press the clutch, shift to R gear, release the brake and handbrake, slowly lift the clutch. Note that during the entire reversing process, do not fully release the clutch—just enough to get the car moving. This effectively controls the speed; generally, unless on a downhill slope, you don't need to use the brake—the clutch alone can control the speed. You also need to steer: turn right to reverse right and left to reverse left. Once the car is straight and entering the parking space, straighten the steering wheel. Below is an introduction to the principles of manual transmission cars: 1. Since the torque converter's automatic transmission range is not wide enough, several rows of planetary gears are connected in series behind the turbine to improve efficiency. The hydraulic control system automatically operates the planetary gears according to engine changes, achieving automatic transmission. The auxiliary mechanism's automatic shifting cannot meet all driving needs, such as parking or reversing, so there is an intervention device—the manual lever—marked P (Park), R (Reverse), N (Neutral), D (Drive), with additional "2" and "1" gears in Drive for starting or climbing slopes. 2. Since the transmission range is divided into several gear ratio segments, it is only continuously variable within the specified segments. Therefore, AT is actually an automatic transmission between stepped and continuously variable. Pros and Cons: AT does not require clutch shifting, has fewer gears with significant changes, and connects smoothly, making it easy to operate, providing convenience for the driver and comfort for passengers.
2
4
Share

How to Deal with Small Yellow Spots on a White Car?

The solutions for small yellow spots on a white car are: 1. Purchase a clay bar, prepare clean water, dip the clay bar in water and rub it vigorously on the yellow spots on the car body, then rinse with clean water; 2. Prepare some iron remover spray, apply it to the yellow spots on the car body, let the spots soak for 4 to 6 minutes, then rinse with clean water. You can also use a cleaning solution, but make sure no iron remover residue is left on the car body; 3. Take the car to a 4S shop for polishing, waxing, and ceramic coating treatment—first polish and wax, then apply the ceramic coating; 4. Prepare some aged vinegar, use gauze to scrub the spots, and rinse immediately after scrubbing with vinegar. Acidic solvents must be thoroughly rinsed with clean water after use.
13
0
Share

Which province does the license plate 'Yu' belong to?

License plates starting with 'Yu' belong to Henan Province. The specific allocations for cities in Henan Province are as follows: Yu A for Zhengzhou, Yu B for Kaifeng, Yu C for Luoyang, Yu D for Pingdingshan, Yu E for Anyang, Yu F for Hebi, Yu G for Xinxiang, Yu H for Jiaozuo, Yu J for Puyang, Yu K for Xuchang, Yu L for Luohe, Yu M for Sanmenxia, Yu N for Shangqiu, Yu P for Zhoukou, Yu Q for Zhumadian, Yu R for Nanyang, Yu S for Xinyang, and Yu U for Jiyuan City. The functions of license plates include: 1. Numbering and information registration for vehicles; 2. Identifying the region to which a vehicle belongs; 3. Tracing the owner and registration details of a vehicle based on its license plate.
12
0
Share

Which country is the Lexus car from?

Lexus cars are made in Japan. Lexus is the same as the brand known as 'Lingzhi' in Chinese, and it is a high-end luxury brand under Toyota. Taking the Lexus ES as an example, this model belongs to the mid-to-large-sized car category, with dimensions of 4975mm in length, 1866mm in width, and 1447mm in height, a wheelbase of 2870mm, a fuel tank capacity of 49.3 liters, and a curb weight of 1720kg. The Lexus ES features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum horsepower of 178PS, a maximum power of 131kW, and a maximum torque of 221Nm, paired with an electronic continuously variable transmission.
18
5
Share

What does the China VI vehicle emission standard refer to?

China VI vehicle emission standard refers to the National Sixth Stage Emission Standard for Motor Vehicles. The China VI emission standard specifies that the sulfur content should not exceed 50mg per kilogram, and the PM (particulate matter) count should not exceed 3mg per kilometer. The China VI standard is established to implement the Environmental Protection Law of the People's Republic of China and the Air Pollution Prevention and Control Law of the People's Republic of China, aiming to prevent and control environmental pollution caused by exhaust emissions from compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. Methods to check whether a vehicle meets the China VI standard include: 1. Logging in to the Motor Vehicle Environmental Protection Website for inquiry; 2. Inquiring at the Vehicle Management Office; 3. Checking the vehicle's environmental protection label; 4. Reviewing the vehicle's factory certificate.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.