What are the car modification regulations?

2 Answers
StAlyssa
07/24/25 6:35pm
Modifications can be made to the body color, engine, fuel type, and frame number, but there are three colors reserved for special vehicles that cannot be used. Replacing the front bumper is considered altering the car's appearance and is allowed after approval, but modifications like raising the chassis to enhance off-road performance are prohibited. Widening tires, modifying the intake system, and exhaust system are also not allowed. Additional Information: Modification: When modifying a licensed car, you must register and declare the changes to the vehicle management office. The modification technical report must be reviewed and approved by the vehicle management office before proceeding. After completing the modifications, you must also go to the vehicle management office to complete the modification change procedures. Practical: Based on the size of the interior space, choose small, aesthetically pleasing, and practical accessories that reflect the owner's personality as much as possible.
Was this review help?
20
0
Share
StAnderson
08/11/25 10:19am
I've modified my old Civic several times, and car modifications really shouldn't be done recklessly. For example, you must register any changes to the body color with the vehicle management office within 10 days, and any new wheels must be the same size as the original factory ones. The most frustrating part is the body kits—if you change the bumper design or add wide fenders, the vehicle management office won't approve it. Last year, I wanted to lower the chassis, but the modification shop said I could only replace the shocks with original factory specifications, as coilovers are considered illegal modifications. Now, during the annual inspection, they frown at my aftermarket exhaust tips—thankfully, I didn't touch the catalytic converter. I really advise everyone to check the "Motor Vehicle Registration Regulations" before modifying. Shops that push you toward extreme modifications are just scamming you.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

Do New Energy Vehicles Have Manual Transmissions?

New energy vehicles do not have manual transmissions; they only come with automatic transmissions, specifically the continuously variable type. New energy vehicles lack a traditional gearbox, as their electric motors directly drive the wheels through a set of reduction gears. The reason new energy vehicles don't have manual transmissions: Structurally, new energy vehicles differ from fuel-powered cars. Taking pure electric vehicles (a type of new energy vehicle) as an example, they rely on a three-electric system (battery, motor, and electronic control) as their power source and do not feature a gearbox. According to their working principle, pure electric vehicles supply electricity from the battery to the motor, which drives the vehicle. From the structural characteristics of the drive motor, the motor's speed range and torque output are controlled by the current magnitude during operation, allowing it to adapt to all speed ranges under varying current and voltage conditions. This means acceleration and deceleration are not achieved through a gearbox converting power. Therefore, there's no need for manual physical intervention in a gearbox to achieve speed conversion, which is why pure electric new energy vehicles only come with automatic transmissions. Advantages of new energy vehicles: Environmental friendliness: This is a key factor driving the national promotion of new energy vehicle development. Powered by battery packs and electric motors, new energy vehicles produce zero tailpipe emissions and zero pollution. Low noise: Compared to fuel-powered cars, new energy vehicles are significantly quieter. Easier maintenance: Unlike traditional fuel vehicles, which require oil and filter changes for engine maintenance, new energy vehicles have less cumbersome upkeep. Lower operating costs: Electricity prices are incomparable to fuel prices.
2
3
Share

Where is the automatic lifting function for the steering wheel on the Mercedes-Benz E300L?

The one-touch window control buttons for the Mercedes-Benz E300L are located on the driver's door armrest. To open the window: Press the button downward to the first detent, then release when the window reaches the desired position. Pressing the button harder to the second detent will automatically fully lower the window. To close the window: Pull the button upward to the first detent (applying excessive force will reach the second detent), then release when the window reaches the desired position. Slightly harder pull to the second detent will automatically raise the window. Additionally, the windows can also be controlled via the lock/unlock buttons on the car key. Holding the lock button for 3 seconds will automatically raise all four windows; holding the unlock button for more than 3 seconds will lower all windows.
11
4
Share

Should the Brake Be Released Slowly During Hill Start?

During a hill start, the brake should be released slowly. The correct procedure for a hill start involves maintaining the proper driving posture, paying attention to various traffic conditions ahead, and avoiding looking down. When starting, the right foot should press the accelerator pedal, while the left foot slightly presses the accelerator pedal and slowly releases the clutch. At the point of semi-engagement, the right foot should gently press the throttle to follow through, while the right heel must not release the brake pedal. Hill start is part of the field test in the second subject of the driver's license examination, which involves starting a vehicle parked on a steep slope. Other test items in the second subject include parallel parking, curve driving, right-angle turns, and reverse parking into a garage.
5
4
Share

How many days does it take to transfer an old license plate to a new car?

It takes 15 working days to transfer an old license plate to a new car. Below is an introduction to the process of transferring an old license plate to a new car and the conditions for using an old license plate. Process of transferring an old license plate to a new car: Transfer the old car: Go to the vehicle management office to complete the transfer of the old car. During the transfer, request to retain the license plate, but the old license plate must be surrendered first. It is important to note the date when the license plate was retained, as it will be needed later. After obtaining the new car, go to the vehicle management office to collect the old license plate. You will need your ID card and the new car's vehicle registration certificate. First, pay the license plate production fee, then provide the date when the license plate was retained to the vehicle management office staff to retrieve the old license plate. Owners who retain their license plates do not receive temporary plates. Before the new metal plate is issued, the old license plate should be used. After 15 working days, go to collect the new metal plate, and you can then replace the license plate. Conditions for using an old license plate: The old car associated with the old license plate must have completed the used car transfer procedure or have been scrapped, with relevant records available at the vehicle management office. The old license plate must be registered under your name, with the owner's name and ID number matching the records. The vehicle management office will reserve the old license plate for the original owner for one year, and the original owner must apply for it within that year. Before the old license plate is reclaimed by the vehicle management office, the original owner must have used it for at least one year. All traffic violations and penalties associated with the old car must have been resolved.
8
4
Share

How to Use the Yidong Windshield Wiper?

Usage method of the Yidong windshield wiper: Adjust the lever below the right side of the steering wheel. The OFF position turns off the wiper. Pushing the lever to the MIST position triggers a single wipe. Setting it to the middle INT position activates intermittent wiping. Pushing the lever to the LO position enables low-speed wiping, while the HI position enables high-speed wiping. Pulling the lever backward activates the front wiper washer function. The Yidong is a model under Changan Automobile, with body dimensions of 4620mm in length, 1820mm in width, and 1490mm in height, and a wheelbase of 2660mm. In terms of exterior design, the front face of the Yidong is not its main highlight; the overall design leans more towards a family-friendly and moderate feel, primarily due to its simple side profile lines and well-proportioned roofline.
19
1
Share

What is ora car?

ora is ORA Auto, a car brand under Great Wall Motors, and it is a two-seat new energy vehicle developed by Great Wall Motors. There are two models of ORA Auto currently on sale, one is ORA R1, and the other is ORA iQ. Taking ORA R1 as an example, it is positioned as a micro car. In terms of body size, the ORA R1 has a length, width, and height of 3495mm, 1660mm, and 1560mm respectively, with a wheelbase of 2475mm. In terms of appearance, the ORA R1 adopts a novel "cute" design language, with a small and exquisite body, a cute and adorable appearance, rounded and lovely lines, and fresh color schemes. The front grille features a closed design, and the large round headlights add a lot of fashionable colors to the car.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.