What Are the Car Maintenance Items?

Where is the car fog light switch?

Fog lights are usually located on the headlight control lever, marked with a fog light symbol. Here is some related information about car fog lights: 1. Because visibility is low in foggy conditions, the driver's line of sight is limited. Fog lights can increase the running distance, especially the strong light penetration of yellow anti-fog lights, which can improve the visibility of the driver and surrounding traffic participants, allowing oncoming vehicles and pedestrians to spot each other from a greater distance. 2. Under normal circumstances, keeping the front fog lights on is considered unethical behavior because it can dazzle drivers of oncoming vehicles. Therefore, fog lights should only be used in heavy fog conditions. Even in heavy rain, only low beams are needed, as fog lights provide no additional assistance.

8

2

Share

What to Do If the Vehicle Annual Inspection Is One Month Late?

Here are the solutions for a vehicle annual inspection that is one month late: 1. If the vehicle has exceeded the annual inspection deadline, the first thing to do is to stop driving it on the road and complete the annual inspection procedures as soon as possible. 2. For vehicles that have exceeded the annual inspection deadline by less than one year, when going to the vehicle management department to complete the annual inspection procedures, you will face penalties. Here is some related information about vehicle annual inspections: 1. According to the "Motor Vehicle Registration Regulations," the owner of a motor vehicle can apply for an inspection compliance mark at the vehicle management office of the registration location up to three months before the expiration of the vehicle's inspection validity period. 2. For vehicles that do not undergo the annual inspection on time, all traffic accidents caused will be the full or primary responsibility of the party involved, and the insurance company will not bear any responsibility. Because the insurance policy specifies that vehicles with expired annual inspections are among the objects of claim rejection, once a traffic accident occurs with a vehicle that has an expired annual inspection, all responsibilities fall on the party involved, and the insurance company has the right to refuse compensation.

10

1

Share

What Causes the Tightening Sound When Turning the Steering Wheel?

There are several reasons for the tightening sound when turning the steering wheel: 1. Friction between plastic parts: Most steering wheel components are made of plastic, which hardens at lower temperatures, leading to noise when they rub against each other. 2. Issue with the steering wheel airbag clock spring: In this case, the noise usually comes from inside the steering wheel. Applying some grease to the airbag clock spring can resolve the issue. 3. Loose or damaged stabilizer bar: If this is the problem, noise will occur not only when turning the steering wheel but also on rough roads. 4. Problem with the shock absorber top mount bearing: If the shock absorber top mount bearing lacks lubrication, it can also cause noise. Open the hood and listen for the source of the noise to check if it's coming from the shock absorber top mount. If so, the component needs to be replaced.

1

Share

What lights should be turned on when driving in fog?

When driving in fog, you should promptly turn on the fog lights, hazard warning flashers, and headlights. Here are some safety precautions for driving in fog: 1. Turn on the fog lights in foggy conditions. The light waves from fog lights penetrate fog more easily and illuminate farther. When the fog is very thick, you can turn on the hazard warning flashers (double flashing lights) because yellow light has better penetration through fog. Remember not to use high beams, as their light waves will be reflected back by the fog, similar to shining on a vast white wall. 2. Use the horn for alerts when necessary. Since visibility is poor in fog, it's advisable to honk the horn at appropriate times when overtaking, turning, or encountering pedestrians to signal your presence. 3. Slow down and avoid sudden braking. First, reduce your speed. Foggy conditions impair visibility, and most vehicles are moving slowly. Driving too fast increases the risk of rear-end collisions. Additionally, slowing down helps prevent the need for sudden braking, which can be dangerous since judging distances is harder in fog, and sudden stops may lead to accidents with vehicles behind you. 4. Avoid reckless overtaking. Do not rush to overtake in foggy conditions, as low visibility makes it harder to assess the situation of the vehicle ahead. Especially in heavy fog, not only should you turn on the hazard warning flashers, but it's also best to maintain a safe distance and follow the vehicle in front. Only when you can clearly confirm the situation of the vehicle ahead should you honk and pass at a low speed.

18

5

Share

How to remove 3M adhesive from a car?

Here are the methods to remove 3M adhesive from a car: 1. If the adhesive is on the car glass, you can first use a hot towel or a hair dryer to heat the adhesive. After a while, try to peel it off when it seems ready. If it's still difficult to remove, heat it a bit longer. 2. You can use a soft cloth dipped in a small amount of gasoline to gently wipe the adhesive area. Since gasoline can "dissolve" certain plastics or paints, use it with caution. Test it on an unimportant area first to ensure no damage occurs. 3. Use a soft cloth soaked in sufficient 95% alcohol to gently wipe the adhesive area. The adhesive will soften and come off easily, and alcohol generally does not harm plastic parts or the car's paint surface. 4. For stains on glass, a mixture of soap, a little ammonia, and turpentine can be used to easily remove marks, leaving the surface smoother.

15

1

Share

What does AST mean in a car?

AST in a car refers to the automatic search and storage function of the radio. Below is an introduction to AST in cars: 1. AST is the automatic search and storage of radio programs, which is the memory channel function on the radio. AM/FM radio is the earliest voice entertainment configuration adopted in cars. 2. By turning on the car radio and long-pressing the AST button, you can automatically search and store radio stations. When using auto-scan, it automatically memorizes the frequencies of stations with signals, allowing you to select stations by pressing buttons later. Long-pressing this button automatically stores radio stations.

16

4

Share

What Are the Car Maintenance Items?

Where is the car fog light switch?

What to Do If the Vehicle Annual Inspection Is One Month Late?

What Causes the Tightening Sound When Turning the Steering Wheel?

What lights should be turned on when driving in fog?

How to remove 3M adhesive from a car?

What does AST mean in a car?

What are the main coverage items of auto damage insurance?

What engine is used in the Changan CS75?

What is Cadillac Mild Hybrid?

Is the Volvo V90 a four-wheel drive vehicle?