What are the C1 low-speed trucks?

1 Answers
DiDavid
07/30/25 6:13am
Low-speed trucks include: original three-wheeled and four-wheeled agricultural transport vehicles, etc. Relevant information is as follows: 1. C1 includes: disc-type agricultural three-wheelers and agricultural four-wheelers. 2. The permitted vehicle types for a C1 driver's license are: passenger vehicles with fewer than 9 seats or trucks with a load capacity of less than 2 tons. 3. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": the permitted vehicle types for a C1 driver's license are: small and micro passenger vehicles, light and micro trucks, and light, small, and micro special-purpose vehicles. A C1 driver's license allows driving vehicles permitted by C2, C3, and C4 licenses. C2 permits driving small automatic transmission vehicles, C3 permits driving low-speed trucks, and C4 permits driving three-wheeled vehicles. A C1 driver's license does not permit driving all blue-plate vehicles.
Was this review help?
14
4
Share
More Forum Discussions

What are the commercial auto insurance coverages?

Commercial auto insurance mainly includes third-party liability insurance, theft insurance, passenger liability insurance, vehicle damage insurance, scratch damage insurance, spontaneous combustion insurance, no-deductible insurance, compulsory traffic insurance, and glass breakage insurance. The following is a relevant introduction to commercial auto insurance: 1. Introduction: Commercial auto insurance is actually motor vehicle commercial insurance, which is voluntarily purchased by the car owner from commercial insurance companies after purchasing the compulsory motor vehicle insurance required by the state. 2. Classification: It is mainly divided into basic insurance and additional insurance. The basic insurance includes four types: vehicle damage insurance, theft insurance, passenger liability insurance, and commercial third-party liability insurance. The additional insurance includes scratch insurance, standalone glass breakage insurance, spontaneous combustion insurance, no-deductible insurance, etc. Additional insurance cannot be purchased independently and must be attached to the corresponding basic insurance.
19
2
Share

Is it necessary to replace the oil filter when changing the engine oil?

Replacing the engine oil requires changing the oil filter. Here are the relevant details: 1. Function of the oil filter: The oil filter removes impurities from the oil circulating in the lubrication system. After the engine runs for a period, it generates some impurities. 2. There are mainly two types of impurities: one is metal shavings from engine component wear during operation, and the other is black sludge-like organic matter formed by chemical changes in the engine oil under high-temperature conditions during engine operation. These impurities mix with the engine oil and circulate through the lubrication system.
15
0
Share

What lights to use when passing through an intersection?

If driving straight through an intersection with traffic signals, simply use the low beam. If passing through an intersection without traffic signals, alternate between high and low beams at least twice. Here is some information about adjusting car lights: 1. Adjusting low beams: Vehicle light adjustment typically involves the left-right and height alignment of low beams. This is done via knobs located behind the headlight assembly, allowing owners to adjust the lights themselves using tools. 2. Headlight adjustment: Lift the engine hood and locate the adjustment knobs behind the headlight assembly. Use the appropriate tools for adjustment, first determining whether the knob adjusts left-right or up-down. Park the vehicle facing a wall about 10 meters away, observe the height of the left and right lights, and if necessary, use tape or other markers for measurement, comparison, and adjustment.
8
5
Share

What brand is the transmission of the Changan CS35?

The manufacturer of the Changan CS35 transmission is Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Changan CS35 is equipped with a 5-speed manual transmission and a 4-speed automatic manual transmission. The automatic manual transmission has eight forward gears. Essentially, an automatic manual transmission is a traditional AT or CVT transmission with the added functionality of manual shifting. When using the Changan CS35's transmission in daily driving, it is important to pay attention to the following points: Do not delay changing the transmission oil for an extended period. Prolonged failure to change the transmission oil can lead to damage to internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause the transmission to overheat and produce a noticeable jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, aiming for smooth operation, may shift into reverse while the vehicle is still moving, which can significantly damage the transmission gears and, over time, lead to gear grinding and other faults. Avoid frequently climbing steep slopes in Drive (D). Automatic transmission vehicles can overheat due to high loads or may shift up too early, resulting in insufficient power for climbing. In such cases, using manual mode to limit the gear to a lower speed or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N). Using a tow rope or directly towing the vehicle is not recommended.
20
5
Share

How to Solve the Problem of Anti-Theft Authentication Failure Preventing Ignition?

If the anti-theft authentication fails and prevents ignition, you can try replacing the remote control battery. It could also be due to a malfunction in the one-touch start function, or there might be an issue with the body control module or the circuit. It is recommended to contact a repair shop for inspection and repair. Once the fault is fixed, the car can be used normally. Here is more information about anti-theft authentication: 1. Ignition System: The ignition system of a car is designed to ensure the proper operation of a spark-ignition engine. It provides the spark plugs with sufficient high voltage in the correct firing order for each cylinder, generating a strong enough spark to ignite the combustible gas mixture. The electronic ignition system uses an electronic control unit to manage ignition based on the car's operating conditions, ensuring the engine remains in an optimal state. 2. Anti-Theft Authentication: Anti-theft authentication failure typically manifests as brake failure, a stiff steering wheel, or the inability to start the engine. This happens because the engine anti-theft system activates, cutting off fuel and power, preventing ignition. Without oil pressure, both the brakes and power steering cease to function. There are generally two main reasons for engine anti-theft authentication failure: First, it could be due to a mismatch between the remote key and the engine control unit. Specific causes include electromagnetic interference nearby, large power equipment in the vicinity, or being in an extremely open area. Second, water seepage from the front windshield film (a common issue) can cause water to flow into the central control unit.
6
5
Share

What is the real fuel consumption of the Sonata 9 Hybrid?

The hybrid version has a fuel consumption of 5.9 liters per 100 kilometers. The Sonata 9 Hybrid is equipped with a 2.0-liter naturally aspirated engine. Additional information: The tenth-generation model comes with two engine options, one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. 1. 1.5-liter turbocharged engine: It has a maximum power of 125 kW and a maximum torque of 253 Nm, with the maximum power achieved at 5500 rpm and the maximum torque available from 1500 to 4000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 2. 2.0-liter turbocharged engine: The 2.0-liter turbocharged engine delivers a maximum power of 176.5 kW and a maximum torque of 353 Nm, with the maximum power achieved at 6000 rpm and the maximum torque available from 1500 to 4000 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.