What are the button functions of the Haval H6 National Tide Edition?

Which gear should be used when going downhill for a long distance

When going downhill for a long distance, the car should be shifted into a low gear. Here is a detailed introduction: When going downhill for a long distance, shift into a low gear. Avoid continuously pressing the brake pedal during a long descent; instead, rely on the low gear and engine speed to slow down the vehicle (engine braking). Due to gravity, the car will naturally accelerate during a long descent. Normally, a few taps on the brakes are sufficient for acceleration, but during a long descent, prolonged braking can cause the brake pads to overheat from friction. Once the brake pads reach a certain temperature, brake failure may occur. Therefore, avoid prolonged braking during a long descent and instead use engine braking to control the speed. Shift into a low gear when going downhill for a long distance to drive safely.

2

4

Share

What is the free travel of the clutch pedal?

The free travel of the clutch pedal is 50,000 to 60,000 kilometers. Here are the relevant details: 1. Although the clutch disc is subjected to extremely high working pressure, due to its strong wear resistance and high-temperature resistance, the replacement cycle of the clutch disc is not short. When symptoms such as weak acceleration, the engine speed increasing but the vehicle speed not rising, clutch slippage, or even a burning smell occur during driving, it indicates that the car's clutch disc is severely worn and needs replacement. 2. Methods to reduce clutch disc wear: (1) Do not depress the clutch pedal unnecessarily when not shifting gears; (2) When decelerating, do not depress the clutch pedal too early. Wait until the speed drops to a reasonable range before depressing the clutch pedal to reduce clutch idling; (3) Shift to neutral when parking and release the clutch pedal to avoid increasing the burden on the clutch; (4) Use first gear to start, to obtain the necessary torque during startup and reduce clutch overload.

16

4

Share

What is the problem when the clutch pedal does not return after being pressed?

The reasons why the clutch pedal of a car does not return after being pressed are as follows: 1. Air enters the clutch pipeline system, causing excessive clutch travel and poor return. This fault can be self-diagnosed. When the clutch pedal is repeatedly pressed, the pedal will rise. Most of the time, this is due to air entering the hydraulic system. In this case, the cause of the air entry should be identified and repaired as soon as possible. 2. The clutch fluid is dirty with impurities, causing severe wear of the internal piston of the clutch master cylinder or blockage of the return oil hole, resulting in the clutch not returning. 3. As the vehicle mileage increases, the clutch return spring loses its elasticity or breaks, causing the clutch pedal not to return. 4. Excessive wear gap of the clutch linkage push rod causes poor return.

3

0

Share

What is the status when pressing the one-button start without stepping on the brake?

The status when pressing the one-button start without stepping on the brake is that the starting system does not receive power. Below are detailed introductions about car brakes: 1. Brake: Brake, also known as stopping, refers to the action of stopping or reducing the speed of running locomotives, vehicles, other transportation tools, or machinery. The brake device is a mechanical braking device that can slow down the speed, also known as a decelerator. 2. Brake system: The brake system consists of the control system, hydraulic system, and power assist system. The control system includes the pedal, handbrake, etc. The hydraulic system consists of hydraulic oil, brake pump, and hydraulic oil pipes. The power assist system is the vacuum booster pump. The electronic control system is composed of the ABS pump, ABS sensor, and ABS computer. The execution system consists of the brake caliper, brake pads, and brake disc.

13

1

Share

What is the difference between 1.2L and 1.5L displacement?

Here are the specific differences between 1.2L and 1.5L displacement: 1. In terms of power performance: The maximum power of the 1.2L displacement is 63kW, and the maximum torque is 108Nm; The maximum power of the 1.5L displacement is 82kW, and the maximum torque is 146Nm. 2. In terms of technology: The 1.2L displacement engine is equipped with PTEC engine technology; The 1.5L displacement engine is equipped with DVVT intake and exhaust valve variable timing technology. 3. In terms of applicability: For urban or short-distance slow driving, it is recommended to choose the 1.2L displacement; If you drive long distances on highways, it is recommended to choose the 1.5L displacement, because at certain speeds on highways, small displacement cars require larger throttle inputs.

15

2

Share

How to move a car without a phone number?

Methods to ask someone to move their car without a phone number are as follows: 1. Contact the property management, provide the license plate number, and obtain the owner's mobile phone number (provided that the owner is also a resident of the same community and the property management has the information on record), or call 114 (provided that the local 114 service has this feature enabled). 2. Contact the other party's insurance company (identified by the insurance sticker on the upper right corner of the windshield), call the insurance company and say: 'I accidentally scratched this owner's car,' provide the car model and license plate number, and ask the customer service to notify the owner to come and handle the accident. To avoid liability, the insurance company will actively contact the owner to deal with the accident.

13

4

Share

What are the button functions of the Haval H6 National Tide Edition?

Which gear should be used when going downhill for a long distance

What is the free travel of the clutch pedal?

What is the problem when the clutch pedal does not return after being pressed?

What is the status when pressing the one-button start without stepping on the brake?

What is the difference between 1.2L and 1.5L displacement?

How to move a car without a phone number?

Are OEM Wheels Cast or Forged?

What type of engine oil is used in the Land Rover Range Rover Sport?

Is an Unmaintained Seal Considered Non-Compliant?

Is it serious if the car window is left open on a rainy day?