What are the button functions of the 2009 Nissan Qashqai?

3 Answers
Kirsten
07/28/25 11:03pm
2009 Nissan Qashqai button functions are as follows: 1. Electronic Stability Program (ESP): Can be manually turned off in rain, snow, or muddy road conditions. Normally keeping it on helps prevent skidding and fishtailing. 2. Hazard Warning Lights (commonly known as hazard lights): Used to warn surrounding vehicles to prevent rear-end collisions. 3. Volume Control Buttons: Besides adjusting volume, they can also be used for track switching. 4. Parking Sensors/Reverse Camera: Displays images on the central screen while the sensors emit warning sounds. 5. Recirculation/Fresh Air Mode: Recirculation keeps cabin air sealed while fresh air mode allows air exchange between inside and outside the vehicle.
Was this review help?
12
1
Share
VonKyle
08/12/25 2:25am
I've driven a Qashqai for ten years, and the buttons on the 2009 model are actually quite intuitive. On the left side of the steering wheel, there are audio control buttons for adjusting volume and skipping tracks; on the right side are the cruise control buttons—just press SET on the highway to maintain speed. The most prominent feature on the center console is the air conditioning knob area: the left knob adjusts temperature, the middle one controls fan speed, and the right one manages airflow direction. Below that is a row of small buttons, with the square rear window defroster button being especially useful on rainy days. The four window buttons are located on the driver's door handle, and the rearview mirror adjustment is a round toggle switch. The headlight switch is on the left stalk behind the steering wheel—twist once for parking lights and again for headlights, then push up for high beams. The wiper controls are on the right stalk with adjustable speed settings. The emergency hazard button is at the top of the center console, a red triangle that stands out. The instrument panel brightness adjustment is a rotary knob below the left side of the steering wheel.
Was this review help?
4
5
Share
Expand All
LilyRose
10/01/25 5:05am
The center console button layout of the Qashqai is quite user-friendly. The air conditioning panel features three large knobs: the left one adjusts the temperature (cold to hot), the middle knob controls the fan speed (clockwise rotation increases airflow) and can be pressed to turn the AC on/off, while the right knob adjusts the vent direction. Below the center console, there are rear window defogger and windshield defogger buttons, which are very useful during summer fogging. The audio control area is located below the AC, with a volume knob and radio station toggle buttons beside the CD slot. The multifunction steering wheel buttons: the left side manages audio controls, while the right side handles cruise control settings. All four power window controls are on the driver’s door, allowing the driver to one-touch operate all windows. The turn signal lever on the left side of the steering wheel integrates turn signals and high/low beam switching. The wiper stalk on the right side is simple to use: push down for a single wipe, and lift upwards for three adjustable speed settings.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

What Causes the Noise When Folding the Rearview Mirror?

Noise when folding the rearview mirror is generally caused by insufficient lubrication of the torsion spring inside the mirror. You can remove the rearview mirror cover, spray lubricant on both ends of the spring, and then manually fold and unfold the mirror to see if the noise disappears. Repeat the process of spraying, folding, and unfolding multiple times until the noise is eliminated. Patterns of noise occurrence: One scenario is during hot summer weather when the sealing components expand due to heat, combined with insufficient lubrication. Another situation is after rain or car washing, as the vehicle may be dirty, and tiny debris washed by rain or water can adhere to the mirror base and sealing components. Solution: Manually extend and retract the rearview mirror, cleaning all visible rotating components connected to the mirror during extension and retraction. After wiping clean, apply WD-40 rust-preventive lubricant to the moving parts, spraying during both folding and unfolding. Gaps or misalignments between plastic and wiring components, especially after prolonged exposure to sunlight, can lead to such issues, causing abnormal noises due to loosening when the vehicle is on bumpy roads. Electrical current noises inside the car mostly occur right after starting, especially during a cold start, when audio systems, air conditioning, wipers, or other devices are activated immediately or automatically. These noises usually disappear once the engine warms up or the vehicle stabilizes during driving.
19
4
Share

What are the current issues with the 10th generation Accord?

The current issues with the 10th generation Accord include a noticeable jerk when accelerating from a low-speed coasting of around 20 km/h, severe shaking when idling in D gear at a red light (which improves slightly when the air conditioning is on but worsens without it), and urban fuel consumption exceeding 11 liters. Below are the relevant details about the 10th generation Accord: 1. Detail one: The 10th generation Accord measures 4893 mm in length, 1862 mm in width, and 1449 mm in height, with a wheelbase of 2830 mm. It is equipped with three types of engines: a 2.0-liter naturally aspirated engine, a low-power 1.5-liter turbocharged engine, and a high-power 1.5-liter turbocharged engine. The model with the 2.0-liter naturally aspirated engine is the hybrid version. 2. Detail two: The Accord's 2.0-liter naturally aspirated engine delivers 146 horsepower and a maximum torque of 175 Nm. This engine reaches its maximum power at 6200 rpm and its maximum torque at 3500 rpm. It features i-VTEC technology and multi-point fuel injection, with an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power of 135 kW and a maximum torque of 315 Nm. 3. Detail three: The Accord's low-power 1.5-liter turbocharged engine produces 177 horsepower and a maximum torque of 230 Nm. This engine achieves its maximum power at 6000 rpm and its maximum torque between 1500 and 3000 rpm. It is equipped with VTEC technology and direct fuel injection, also featuring an aluminum alloy cylinder head and block.
5
2
Share

Why is the noise level so high in the new Corolla?

The reasons for the high noise level in the new Corolla are: 1. Fuel issues, incomplete combustion leading to unstable engine idle speed and increased noise; 2. The engine lubricating oil and gearbox gear oil become thicker, increasing viscosity, causing unstable idle speed, which requires raising the idle speed, making the car sound louder at idle; 3. Thickened lubricating oil, along with increased clearance between the cylinder and piston, greater compression leakage, and worsened combustion; 4. Engine damage. Taking the Corolla Hybrid 2020 1.8L E-CVT Comfort Edition as an example, this is a compact 4-door 5-seater sedan under FAW Toyota, with dimensions of 4635mm in length, 1775mm in width, and 1470mm in height, a wheelbase of 2700mm, and a maximum engine torque of 142 N·m.
2
0
Share

What's the reason when the battery has power but the car makes a clicking sound and won't start?

The reasons why the battery has power but the car makes a clicking sound and won't start are: 1. Excessive carbon buildup in the intake pipe, throttle valve, idle motor, and other parts; 2. Insufficient fuel supply in the fuel system; 3. The magnetic coil cannot maintain the engaged state and cannot provide starting torque; 4. Fault in the ignition system; 5. The gear was not returned to P when parking; 6. The starting carbon brush is damaged, resulting in insufficient voltage. The clicking sound during startup is caused by the repeated engagement between the magnetic package and the relay. A relay is an electrical control device that causes a predetermined step change in the controlled quantity in the electrical output circuit when the change in the input quantity reaches the specified requirements.
8
2
Share

Does a BMW Oil Pan Leak Need to Be Repaired?

BMW oil pan leaks need to be repaired, otherwise it will lead to increased oil consumption. When the oil level drops to a certain extent, it will affect the lubrication effect of the oil on the engine. The reasons for oil pan leaks are: 1. The oil pan screws are not tight enough, causing the seal between the engine block and the oil pan to deteriorate, resulting in oil leakage from the oil pan; 2. After being subjected to severe external impact, the sealing performance of the oil pan deteriorates or cracks appear, leading to oil leakage from the oil pan. Taking the 2021 BMW X5 xDrive30i X Design Package as an example, its length, width, and height are 4930mm, 2004mm, and 1776mm respectively, with a wheelbase of 2975mm. It is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission.
1
2
Share

Which company manufactures the CVT transmission for the 2021 Emgrand?

2021 Emgrand's CVT transmission is produced by Belgium's Punch Powertrain. The transmission, also known as a gearbox, consists of a speed change transmission mechanism and a control mechanism. It is an automotive component used to alter the speed and torque from the engine, and can fix or change the transmission ratio between the output shaft and input shaft in different gears. Taking the Emgrand GL 2021 UP Manual Leading Edition as an example, its body dimensions are 4725mm in length, 1802mm in width, and 1478mm in height, with a wheelbase of 2700mm. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 141PS, a maximum power of 104kW, and a maximum torque of 235Nm. The front suspension type is MacPherson independent suspension, and the rear suspension type is torsion beam non-independent suspension.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.