What are the brands of motorcycle gloves?

What is the content of the first day of driving practice for Subject 3?

The first day of driving practice for Subject 3 starts with training preparation, light simulation, starting, straight-line driving, and gear shifting. The road driving skill test content for Subject 3 generally includes: vehicle preparation, light simulation test, starting, straight-line driving, gear shifting, lane changing, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving. For the Subject 3 test, it is crucial to follow instructions carefully. The test covers up to 16 assessment items from vehicle preparation to the end of the test. During the test, follow the voice prompts for operations. Note: roadside signs are only for reference; wait for the voice command before taking action. Stay relaxed and look ahead to avoid excessive tension. Pay attention to road markings and reference points. Ensure that the gear matches the speed.

5

Share

Where is the cabin air filter located in the Volvo S60?

Volvo S60's cabin air filter is located inside the glove compartment in front of the front passenger seat. The function of the cabin air filter is to absorb various harmful substances in the air, minimizing passenger irritation due to allergies. Steps to replace the cabin air filter: 1. Remove the side panel of the gearbox; 2. Take off the lower cover of the glove box (note the glove box cover has electrical connections - carefully disconnect the wires after loosening screws and clips); 3. Locate and remove the fuse box to reveal the cabin air filter cover; 4. Open the clips on both sides of the cover to pull out the old filter. The Volvo S60 is a mid-size sedan with a 4-door, 5-seat configuration, measuring 4761mm in length, 1850mm in width, and 1437mm in height, with a wheelbase of 2872mm.

2

4

Share

Should You Use High Beam or Low Beam on Highways?

When driving on highways at night, it is advisable to use high beams. The surroundings of highways at night are generally very dark, making it difficult for drivers to see the road conditions clearly. Typically, low beams only illuminate up to 30 meters ahead. Given the high speeds on highways, if there is an obstacle ahead, the driver may not have enough time to react, which can easily lead to accidents. Therefore, it is best to use high beams when driving on highways. Using low beams at high speeds can be very dangerous, even fatal. High beams illuminate a range of about 60 to 70 meters, providing sufficient reaction time in case of emergencies. There is no need to worry about high beams affecting oncoming vehicles, as the central median usually consists of green vegetation or metal barriers that can block almost all the light, ensuring that the drivers of oncoming vehicles are not dazzled.

12

1

Share

How to Adjust the Vehicle's Side Mirrors?

Methods for adjusting the vehicle's side mirrors: 1. For the left side mirror, use the ground as a reference. Adjust it so that the mirror fully shows the second handle at the rear of the vehicle and also provides a view of the ground; 2. For the right side mirror, adjust it to show half of the rear handle and the ground line, with a slight downward tilt; 3. Adjust the interior rearview mirror to have a clear view of the rear window; 4. Avoid adjusting the exterior mirrors too high—they should provide a view of the ground and the roadside; 5. During adjustment, minimize blind spots. The smaller the blind spot range while driving, the higher the corresponding driving safety factor.

5

Share

Is the engine of the WEY VV6 a domestic brand?

The engine of the WEY VV6 is domestically produced, developed independently by Great Wall. The WEY VV6 is equipped with two types of engines. The models are E20CB and GW4C20B. The E20CB engine has a maximum horsepower of 227 HP, a maximum power output of 167 kW, a maximum power speed of 5500 rpm, and a peak torque of 387 N·m. The GW4C20B engine has a maximum horsepower of 224 HP, a maximum power output of 165 kW, a maximum power speed of 5500 rpm, and a peak torque of 385 N·m. For daily maintenance of the WEY VV6 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD-SF grade gasoline engine oil based on the additional equipment of the intake and exhaust system and usage conditions; for diesel engines, choose CB-CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area and accelerating engine wear and internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.

5

0

Share

What is the function of a cylinder head gasket?

The function of a cylinder head gasket is to ensure a good seal between the cylinder block and the cylinder head, thereby maintaining the sealing of the combustion chamber and preventing gas leakage from the cylinder and coolant leakage from the water jacket. The cylinder head gasket is a sealing component placed between the top surface of the engine block and the bottom surface of the cylinder head. It ensures that the combustion chamber remains sealed to prevent gas leakage and that the coolant and engine oil flowing from the engine block to the cylinder head do not leak. During engine operation, the temperature inside the cylinder is very high, and both the engine oil and coolant have certain corrosive properties. Therefore, the cylinder head gasket must possess heat resistance and corrosion resistance. There are tiny gaps between the cylinder block and the cylinder head, and the top surface of the engine block and the bottom surface of the cylinder head have certain roughness and unevenness. Additionally, the cylinder head may deform under stress during engine operation. Hence, the cylinder head gasket must not only have sufficient strength, pressure resistance, heat resistance, and corrosion resistance but also a certain degree of elasticity.

5

Share

What are the brands of motorcycle gloves?

What is the content of the first day of driving practice for Subject 3?

Where is the cabin air filter located in the Volvo S60?

Should You Use High Beam or Low Beam on Highways?

How to Adjust the Vehicle's Side Mirrors?

Is the engine of the WEY VV6 a domestic brand?

What is the function of a cylinder head gasket?

Where to Collect the Vehicle Annual Inspection Sticker?

Where is the computer plug of BAIC Huansu H2 located?

What to Do If a C1 Driver's License is Deducted 12 Points?

Which province does the license plate abbreviation 'Xin' represent?