What are the brands of maxus models?

What is the fuel consumption of the 8th generation Accord?

8th generation Accord fuel consumption is 7.80l/100km. Engine specifications: The 8th generation Accord is equipped with a newly upgraded Honda i-VTEC engine across the entire lineup. The 2.0-liter engine features enlarged intake valves, delivering a maximum power output of 156 horsepower (115 kilowatts). The i-VTEC inline 4-cylinder engine has smaller spark plugs and redesigned coolant flow with optimized ignition. Fuel tank usage precautions: Do not wait until the fuel warning light comes on to refuel. Check the fuel gauge before driving. The fuel pump is located inside the tank and operates at high temperatures during continuous use. Being submerged in fuel helps effectively cool it. When the fuel light comes on, it indicates the fuel level has dropped below the pump. Consistently waiting until the light comes on to refuel will shorten the fuel pump's service life. Maintaining too little fuel in the tank may even cause the fuel pump to burn out.

13

5

Share

What is the simplest and most accurate method for reverse parking with an automatic transmission?

Here are the techniques and methods for reverse parking with an automatic transmission: 1. Remember the gear positions: P for Park, R for Reverse, and N for Neutral. Before reversing, ensure the car comes to a complete stop, then shift to R gear. 2. Observation: Conduct a full panoramic check of the surroundings—left, right, front, and back—to watch for pedestrians, bicycles, motorcycles, or other vehicles. Wait for them to pass before reversing. Pay special attention to children behind the vehicle. Use the rearview mirror and side mirrors for observation. 3. Pay attention to reverse alarms and special road conditions: Reverse radar typically has three alert levels for obstacles. At 1.5 meters, it emits a gentle beep. At 1 meter, the beeping becomes more urgent. Within 0.5 meters, it triggers an emergency beep. Beginners must familiarize themselves with these alarm sounds first. When the surroundings are clear, slowly release the brake pedal, but keep your right foot on the brake to control the reversing speed. Reverse at pedestrian speed. On flat surfaces, avoid pressing the accelerator. If encountering a step or obstacle, gently press the accelerator to overcome it, then brake to slow down afterward.

7

5

Share

How to Switch the Speedometer Display on the Elysion?

Press the SEL/RESET button to switch between Speedometer A and Speedometer B. The Honda Elysion odometer is divided into total mileage and single trip mileage. To reset the trip meter, first display the trip meter, then press and hold the SEL/RESET button, and the trip meter will be reset. The following are precautions for driving on highways: 1. Drive in the designated lane: Highways have clearly marked lanes, including dedicated lanes for large vehicles, small vehicles, etc. When overtaking, once you occupy a lane, return to your corresponding lane promptly after completing the overtaking, and avoid occupying other lanes for extended periods. Additionally, the emergency lane should not be occupied for long periods without special reasons. 2. Maintain a safe speed and avoid speeding: The dangers of speeding are well-known, whether on local roads or highways, it can lead to irreversible consequences. 3. Maintain a safe following distance: Generally, on dry roads with good braking conditions, the following distance (in meters) should not be less than the speed (in km/h). For example, at 80 km/h, the distance should be no less than 80 meters, and at 100 km/h, no less than 100 meters. Always pay attention to roadside distance markers. In rainy, foggy, snowy, or wet road conditions, the following distance should be more than doubled. 4. Observe traffic signs: Always pay attention to roadside and overhead signs and markings while driving, and stay appropriately to the right to avoid running over the right lane divider, providing sufficient lateral distance for overtaking vehicles. 5. Do not arbitrarily occupy the emergency lane in case of traffic accidents: Traffic accidents are inevitable on highways. If other vehicles cause a traffic jam, do not arbitrarily occupy the emergency lane, as this may prevent rescue vehicles from performing their duties. 6. Avoid fatigued driving and take timely breaks: Fatigued driving is extremely dangerous on highways. When fatigued, the body's reaction ability decreases, making it difficult to respond correctly to sudden situations.

4

2

Share

How to Solve the Shaking Issue When Turning on the Air Conditioning in a BMW 5 Series?

Solutions for the shaking issue when turning on the air conditioning in a BMW 5 Series include the following: 1. Severe Engine Carbon Deposits: The most common cause of car shaking is a dirty throttle body or excessive carbon deposits in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold-start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts. This makes starting difficult. In such cases, the car will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits is drawn into the combustion chamber by the engine's vacuum suction, making the air-fuel mixture too rich. The engine's combustible mixture alternates between being too lean and too rich, causing idle shaking after a cold start. 2. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Problems with the ignition system or poor performance of the spark plugs can also lead to such symptoms. 3. Unstable Fuel Pressure: If you have already cleaned the engine carbon deposits, cleaned the throttle body, and replaced the spark plugs but still experience shaking when starting, it is recommended to check the fuel supply pressure and the intake pressure sensor. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can all cause the car to shake.

4

5

Share

What is the difference between China 6 and China 5?

The differences between China 5 and China 6 emission standards are as follows: Different emission standards: China 6 emission standards are more than 30% stricter than China 5. Excluding the influence of working conditions and testing, gasoline vehicles' carbon monoxide emissions are reduced by 50%, total hydrocarbons and non-methane hydrocarbons emissions are reduced by 50%, and nitrogen oxide emissions are reduced by 42%. Different implementation times: The China 5 standard was implemented nationwide on January 1, 2017, as the fifth stage of national motor vehicle emission standards. China 6 was implemented from July 1, 2019. Different principles: In the China 5 stage, diesel vehicles and gasoline vehicles had different emission standards, but China 6 adopts a fuel-neutral principle, meaning that regardless of the fuel type, the emission limits are the same. Different issuing departments: The China 5 standard was issued by the Ministry of Environmental Protection; the China 6 standard was issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection, and Quarantine. Different letter representations: China 5 is represented by 'V'; China 6 is represented by 'VI'. Different monitoring requirements for plug-in hybrid electric vehicles: Compared to China 5, China 6 has improved monitoring requirements for plug-in hybrid electric vehicles, including energy storage systems, thermal management systems, brake regeneration, drive motors, generators, and other regulations. The China 5 standard limits are as follows: Gasoline vehicles cannot emit more than 1,000 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles cannot emit more than 68 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles cannot emit more than 60 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles cannot emit more than 4.5 milligrams of PM fine particles per kilometer driven. China 6 has two standards: China 6a and China 6b, as follows: China 6a standard limits: Gasoline vehicles cannot emit more than 700 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles cannot emit more than 68 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles cannot emit more than 60 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles cannot emit more than 4.5 milligrams of PM fine particles per kilometer driven. China 6b standard limits: Gasoline vehicles cannot emit more than 500 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles cannot emit more than 35 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles cannot emit more than 35 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles cannot emit more than 3 milligrams of PM fine particles per kilometer driven. Affected by the China 6 emission policy, although China 5 vehicles are not currently restricted in normal use, with no driving or license plate restrictions, the resale value of the vehicles will be significantly impacted. For car owners, if they purchase a truck for freight transport with a loan, after repaying the loan, the vehicle's depreciation is equivalent to the net profit earned by the owner during that period. A higher residual value means the owner earns more. Therefore, from this perspective, China 6 vehicles, with longer service life and more road rights, have more advantages.

9

2

Share

How to Adjust the Time and Date of a Dash Cam?

Methods to adjust the time and date of a dash cam: 1. Press the menu button, select time settings and confirm, then adjust the date and time; 2. Press the menu button again to return to the main interface, where the displayed time will be the adjusted time. Generally, if the dash cam has a built-in GPS module, the system time will update automatically. Without a GPS module, the dash cam time may become unsynchronized and require manual adjustment. Besides the built-in GPS affecting time synchronization, when the dash cam's internal battery is depleted, it loses memory function after shutdown, leading to time desynchronization. This can be resolved by charging or replacing the battery.

18

3

Share

What are the brands of maxus models?

What is the fuel consumption of the 8th generation Accord?

What is the simplest and most accurate method for reverse parking with an automatic transmission?

How to Switch the Speedometer Display on the Elysion?

How to Solve the Shaking Issue When Turning on the Air Conditioning in a BMW 5 Series?

What is the difference between China 6 and China 5?

How to Adjust the Time and Date of a Dash Cam?

What are the differences between Golf and Polo?

What is the maximum wading depth of the Audi Q7?

What car is the Buick Verand?

How to Display Tire Pressure on BYD Song?