What are the brands of hybrid electric vehicles?

Why is Subject 4 always under processing?

Displaying 'under processing' means it is under review, checking the validity of study hours and the authenticity of student information. The review usually takes 3-7 days, and the information query system requires some time to update. Students can check again after some time. Below are the precautions for answering Subject 4 questions: Reservation status: If the reservation is successful, generally about 3 days before the exam, you will receive an SMS reminder of successful or failed reservation. At that time, bring your ID card to the designated venue for the exam. If the reservation fails, it may be because the reservation ranking exceeds the exam capacity, and you can re-reserve after one exam cycle (about 10 days). Precautions 1: The answering time for Subject 4 is 45 minutes, with 50 questions. There is ample time, so think carefully when answering to ensure accuracy. Precautions 2: Leave questions you don't know or are unsure about for last. The system sets one-time questions. 'One-time' means answered questions cannot be modified. A score of 90 is passing. If you fail the first time, you can answer a second time, and you need to re-enter your ID number for the second attempt.

20

2

Share

How long after crystal coating can the car be exposed to water?

After crystal coating, the car should not be exposed to water for more than 24 hours, and it should not be washed until a week later. Crystal coating for cars provides a reliable paint sealing technology that efficiently and durably protects the car paint, preventing environmental impacts on the paint color. It effectively resists common chemical corrosion and minor scratches in daily life. Advantages of crystal coating for cars: Scratch resistance: The hardness of diamond crystal reaches 6H, compared to the 2H hardness of ordinary car paint, it can prevent most minor scratches. It also has an elastic recovery function, protecting the vehicle from daily minor scratches and reducing paint scratches by more than 70% compared to ordinary coatings. When external force exceeds the elastic protection range of the crystal, it usually only leaves a scratch on the crystal without damaging the paint. Corrosion resistance: The ultra-fine nano-crystal layer of diamond crystal isolates the paint from the external environment, effectively preventing oxidation and resisting corrosion from bird droppings, insect residues, acid rain, etc. No cracking: Diamond crystal resists UV rays, high temperatures, and extreme cold, with a temperature resistance range from -50°C to 300°C. It adapts to a wide range of temperature changes without cracking or peeling.

13

0

Share

Can water be used instead of windshield washer fluid in summer?

In summer, tap water cannot be used as a substitute for windshield washer fluid. Firstly, the cleaning ability of windshield washer fluid is definitely better than that of tap water, so using windshield washer fluid can clean the windshield more effectively. Secondly, tap water contains impurities, which may clog the washer nozzles over time and affect the use of the wipers. Moreover, windshield washer fluid also has a lubricating effect, reducing friction between the wipers and the windshield, and can extend the service life of the wipers. Additional information: 1. Windshield washer fluid is one of the more important fluids for a vehicle. Although the fluid itself is not expensive, it helps maintain the cleanliness of the windshield, providing the driver with a clear view while driving and enhancing safety, which is also very important. The selection and use of windshield washer fluid are not very complicated, but there are still some details to pay attention to. 2. First, the question of whether you can add more fluid if the current supply hasn't run out yet. Of course, you can, because windshield washer fluid doesn't contain any special chemical components, so mixing different brands is not a problem. 3. Also, to avoid the awkward situation of running out of fluid and being unable to clean the windshield, it is recommended to add more fluid as soon as the vehicle alerts you that the washer fluid is low, rather than waiting until it's completely empty.

4

1

Share

How is running a red light determined in 2021?

It is determined by capturing three photos through electronic cameras: the first photo shows the vehicle crossing the intersection stop line, including the red light signal and license plate number; the second photo shows the vehicle completely passing the stop line, including the red light signal and license plate number; the third photo shows the vehicle continuing to move, mainly by comparing the position change of the vehicle in the second photo, including the red light signal and license plate number. Capturing these three photos can determine that the vehicle has run a red light. The act of running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and if a vehicle passes through an intersection during a red light, it constitutes the traffic violation of running a red light. Six situations of running a red light: Stopping immediately after crossing the line at a red light (when the red light is on, the vehicle cannot stop in time, and the front of the vehicle crosses the stop line): If the vehicle has just crossed the stop line during a red light but stops immediately, this act of running a red light will not be penalized. However, if there is obvious movement after crossing the line, it will be penalized. The three photos captured by electronic cameras for running a red light are: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered running a red light. Running a red light under the direction of a traffic officer (the signal is red, but the traffic officer indicates permission to pass): When there is a conflict between the traffic signal and the traffic officer's gesture, the driver must obey the officer's on-site command. If running a red light occurs due to the officer's direction, the driver can obtain a diversion certificate from the local traffic police station to avoid penalties. If the party disagrees with the penalty, they can appeal through administrative reconsideration or administrative litigation. Stopping with the entire vehicle body over the line at a red light (failing to brake in time, causing the entire vehicle to cross the stop line): If the vehicle stops completely after crossing the stop line and does not move further, this is not considered running a red light. However, this situation is considered over-the-line parking. According to Article 4, Item 5 of the "Scoring Standards for Road Traffic Safety Violations," failing to drive or stop as required at an intersection results in a 2-point deduction. Reversing after over-the-line parking (attempting to avoid penalties by reversing after stopping over the line at a red light): Vehicles are not allowed to reverse at railway crossings, intersections, one-way roads, bridges, sharp turns, steep slopes, or tunnels. If reversing is done illegally, a warning or fine may be imposed. Accidentally running a red light behind a large vehicle (due to the large vehicle blocking the view, the driver follows it through the intersection): Drivers must maintain sufficient visibility to see the traffic signals ahead and ensure a safe braking distance. Generally, if a vehicle is captured behind a large vehicle, it is due to rushing through the intersection. This behavior will be penalized as running a red light. Passing through an intersection during a yellow light (passing through the intersection when the signal turns yellow): Traffic authorities state that the "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China" stipulate that vehicles that have already crossed the stop line when the yellow light is flashing may continue to pass. If the driver continues to rush through after the yellow light is on, being captured in this situation will also be considered running a red light.

3

1

Share

What Lights to Use When Meeting Another Vehicle at Night?

When meeting another vehicle at night, you should switch to low beams when the oncoming vehicle is approximately 150 meters away. In sharp curve sections or if the other driver does not proactively switch to low beams, you may alternate between high and low beams to alert the other vehicle. On poorly lit or unlit roads, you should choose a meeting point in advance, about 150 meters away, and coordinate the use of high and low beams with the oncoming vehicle. If the other vehicle is using high beams, you should switch to low beams; when the other vehicle uses low beams, you should then use high beams. When the oncoming vehicle is about 150 meters away, turn off the high beams and switch to low beams to prevent glare. This avoids blinding the other driver and ensures they can see the road clearly. If the oncoming vehicle does not adjust its lights within 150 meters, use alternating high and low beams to signal them. On well-lit roads, you should turn off high beams in advance and use low beams when meeting another vehicle. Once the two vehicles begin to pass each other, turn off the low beams and only use parking lights or marker lights. When the other vehicle's lights pass through your cabin, you can then switch back to low beams and continue driving.

3

4

Share

What documents are required for the Subject 3 driving test?

For the Subject 3 test, candidates only need to bring their ID card for registration, entering the examination area, and identity verification in the vehicle. No other documents are required. Additional materials are only needed for Subject 4. Valid original ID card or valid temporary ID card must be presented. For those applying for a driver's license outside their registered residence, a valid original local residence permit is also required. Below is relevant information about the driving test subjects: Subject 1: Road traffic safety laws, regulations and related knowledge test (Subject 1) - written test, computer-based, 100 points maximum, 90 or above is passing (inclusive). Subject 2: Field driving skills test (Subject 2) - conducted on-site with actual vehicles. Results are either pass or fail. Five mandatory items performed in sequence: reverse parking, parallel parking, S-curve, right-angle turn, and hill start and stop. 100 points maximum, 80 or above is passing (inclusive). Subject 3: Road driving skills test (Subject 3) - conducted on roads or simulated areas with actual vehicles. 100 points maximum, passing scores vary: 90+ for large buses, 80+ for large trucks, and 70+ for other vehicle types. Subject 4: Safe and civilized driving knowledge (Subject 4) - written test, 100 points maximum, 90 or above is passing (inclusive).

7

0

Share

What are the brands of hybrid electric vehicles?

Why is Subject 4 always under processing?

How long after crystal coating can the car be exposed to water?

Can water be used instead of windshield washer fluid in summer?

How is running a red light determined in 2021?

What Lights to Use When Meeting Another Vehicle at Night?

What documents are required for the Subject 3 driving test?

What Causes the Jerk When Shifting from First to Second Gear in a Manual Transmission?

How to solve fault code p0321?

What are the point deductions for code 20304?

Why Don't Sports Cars Drive on Highways?