What are the brands of brake calipers?

1 Answers
StHarper
07/29/25 10:06pm
Brake caliper brands are as follows: Introduction: Brake caliper brands include PFC Brakes, Brembo Brakes, Alcon Brakes, AP Racing Brakes, etc. Additional information: Automotive brake calipers are clamping devices designed to decelerate moving wheels, bring them to a stop, or maintain a stationary state, typically used exclusively in disc brake systems. They constitute the protruding outer section of the brake pad assembly and serve as components that enhance braking performance. In vehicles, disc brake systems consist of a brake master cylinder, a brake disc connected to the wheel, and the brake caliper mounted on the disc.
Was this review help?
1
5
Share
More Forum Discussions

What is the difference between the Avalon and the Allion?

The differences between the Avalon and the Allion are: 1. Different powertrains: The Avalon is equipped with a 2.5L naturally aspirated engine; the Allion is equipped with a 2.0L naturally aspirated engine. 2. Different dimensions: The Avalon measures 4975mm in length, 1850mm in width, and 1450mm in height; the Allion measures 4720mm in length, 1780mm in width, and 1435mm in height. 3. Different configurations: The Avalon offers a dual-tone interior design, features a 9-inch multimedia touchscreen, a multifunction steering wheel wrapped in genuine leather, a traditional analog gauge cluster with a 7-inch HUD display in the center, and driving mode selection buttons and an electronic parking brake behind the gearshift.
12
3
Share

What is the weight of the BYD Qin Plus-DMI?

The curb weight of the BYD Qin Plus-DMI is approximately 1.6 tons. The curb weight, traditionally referred to as the 'empty car weight,' is the weight of the vehicle when fully equipped according to the manufacturer's specifications (including items like the spare tire and tools) and with all fluids filled. It is an important design parameter for the vehicle. More details are as follows: 1. The BYD Qin Plus-DMI is a compact car launched by BYD, with dimensions of 4765mm in length, 1837mm in width, and 1495mm in height, and a wheelbase of 2718mm. 2. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 81kw, and is paired with a CVT continuously variable transmission.
7
4
Share

How to enable the horn beep when locking the Honda CR-V?

Honda CR-V horn beep when locking method, close the doors, start the car, within 8 seconds, press the central lock unlock button 3 times, about once per second, the horn sound will be turned off. When locking the car, pay attention to the following points: 1. Try to use the mechanical key to lock the car. When locking the car, it is more reliable to use the mechanical key to lock the car, so that any interference device will not work. If you don't mind the trouble, using the mechanical key more often can also save power and is safer than the smart key. When using the mechanical lock, make sure the doors are properly closed, and you must hear the sound of the whole car locking, otherwise it is not successfully locked. 2. After locking the car, carefully observe whether the car lights flash. If you use the electronic lock to lock the car, you should observe more whether the car is locked properly. For example, check whether the car lights are on after locking; or whether the rearview mirrors automatically fold (only for vehicles with this function). 3. After locking the car, pull the door to make sure the door is really locked. After locking the car, it is best to habitually pull the door handle again. When pulling the door, pay attention to the action should be light, not too hard, so as not to damage the door switch.
12
0
Share

How to restart the 2020 Audi MMI?

Press and hold the MENU button, the large round button, and the top-right button among the four function buttons simultaneously for three seconds, then release. The MMI system will restart. Audi has developed a new operating control concept: the Multimedia Interface (MMI). The MMI cleverly integrates the operation of all infotainment components into one display and operating system. By simplifying the controller and implementing a unified logic, the MMI allows quick, easy, and intuitive access to a wide range of functions and technologies. Common solutions for Audi MMI system faults: 1. If the 3G MMI shutdown screen does not display the Audi logo, modify the 5F information control unit coding, restart, and then revert to the original coding. 2. If the 3G MMI playback sources (DVD, SD, CD, Juxbook) appear gray and unreadable, it indicates J794 damage; replace the unit. 3. If the 3G MMI navigation interface appears in English, switch the MMI interface to English and then back. If the issue persists, reinstall the navigation data. 4. If the 3G MMI system occasionally freezes, goes black, or has no sound, upgrade the system. If ineffective, replace J794 to fix. 5. If the 3G MMI system has cold-start navigation initialization issues, upgrade the system. If ineffective, replace J794 to fix. 6. If the 3G MMI navigation displays incorrect addresses or fails to receive satellite signals without fault codes, upgrade the MMI system. If ineffective, replace J794 to fix. 7. If the CAR menu is missing after replacing J794 in the 3G MMI: perform an online SVM comparison; install it in another vehicle with the same configuration for SVM comparison; modify via engineering mode.
2
0
Share

Where is the cigarette lighter fuse in the Audi Q5?

Audi Q5 front row fuses are located above the driver's footrest, while the rear row fuses are on the side of the trunk. The specific position of the cigarette lighter is clearly marked on the inside of the fuse box cover. Below is the inspection tutorial: 1. Before inspection, completely turn off the engine and all electrical equipment. 2. Locate the corresponding position and use a small pry bar to open the protective cover. 3. Check the position of the cigarette lighter fuse on the cover. 4. There is no need to remove the fuse immediately; first, use a test pen to measure it. If one end lights up and the other does not, it is likely that the fuse has blown. 5. Use a clip-like tool to remove the blown fuse and then install a new one.
3
5
Share

What is the reason for the discontinuation of Wuling Rongguang V?

Wuling Rongguang V has not been discontinued and is still selling well. More details are as follows: 1. Wuling Rongguang V maintains its original exterior and interior design, with only some configuration adjustments. The new model not only increases the maximum load capacity but also comes with features such as dual evaporator air conditioning, automatic door locking while driving, and door ajar alarm. 2. In terms of body dimensions, the Wuling Rongguang V measures 4415/1685/1850mm in length, width, and height, with a wheelbase of 2720mm. 3. For the powertrain, Wuling Rongguang V offers 1.2L and 1.5L naturally aspirated engines paired with a 5-speed manual transmission.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.