What are the body standards of the Model Y?

3 Answers
StLily
07/29/25 1:38pm
Tesla Model Y's dimensions are: length 4750mm, width 1921mm, height 1624mm, with a wheelbase of 2890mm. More related information is as follows: 1. Introduction: The Tesla Model Y is a mid-size SUV launched by Tesla China, equipped with a pure electric 431 horsepower motor and a pure electric 461 horsepower motor, with total power outputs of 317kw and 339kw respectively, matched with a single-speed electric vehicle transmission. 2. Configuration: The Tesla Model Y features a dual-motor all-wheel-drive system, front suspension type is double-wishbone independent suspension, rear suspension type is multi-link independent suspension, steering assistance type is electric power steering, and the body structure is unibody.
Was this review help?
7
0
Share
VanEloise
08/14/25 4:36am
The Tesla Model Y's body standards are quite interesting. The car is approximately 4750 mm long, 1920 mm wide, and 1620 mm tall, with a wheelbase of 2890 mm between the front and rear wheels. These dimensions make it very easy to handle in urban areas, with relatively easy turning and parking, as it's not too wide or large. The trunk space is around 850 liters, and with the rear seats folded down, it can expand to over 2200 liters, which is sufficient for family camping. The ground clearance is about 168 mm, making it suitable for general road obstacles but not ideal for off-roading. Additionally, the body uses a mixed design of high-strength steel and aluminum alloy, which reduces weight while enhancing structural safety. The drag coefficient is very low, around 0.23, which greatly helps with energy efficiency and range. I think electric vehicles should be like this—spacious, easy to maneuver, and hassle-free for daily commuting. The camera-assisted parking also gives beginners more confidence, so there's no need to always obsess over complex data.
Was this review help?
11
1
Share
Expand All
RichardDella
10/10/25 4:22am
I've been driving the Model Y for a few months now, and the body dimensions are quite practical for me. The length of 4750 mm isn't too exaggerated, and the width of 1920 mm (about 2170 mm with mirrors) usually fits well in residential parking spaces. The height of 1620 mm gives a spacious feel inside without any sense of confinement, while the 2890 mm wheelbase provides ample legroom in the back, making it easy to take two or three friends out for trips. The safety standards are also high, with a reported five-star crash test rating, using special alloy materials to reduce accident damage, and featuring sturdy bumpers and body structure. With convenient charging, the lightweight body design enhances range efficiency, and daily highway driving is quiet with minimal wind noise. I feel these dimensions strike a good balance between urban maneuverability and long-distance comfort. Washing and waxing are straightforward, and the paint is resistant to scratches—just remember to keep the cameras clean in rainy weather to maintain visibility.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

How to Remove the Honda Lingpai Wiper?

The method for removing the Lingpai wiper is as follows: 1. Lift the wiper arm from the windshield. 2. Then press and hold the wiper lock pin to release it. 3. Finally, slide the wiper along the wiper arm to remove it. Maintenance methods for the Lingpai wiper: 1. Replace the wiper blade when it hardens. If the wiper works well during heavy rain but leaves uneven streaks when used in light rain, affecting visibility, this indicates the wiper blade has hardened. 2. Replace the wiper arm when the spring tension weakens. The wiper blade relies on the spring tension of the wiper arm to maintain close contact with the windshield. If the spring tension weakens, the wiper may lift due to strong wind pressure on the windshield at high speeds, especially noticeable with longer wipers, leaving parts of the glass uncleaned. This is commonly referred to as wiper lift during driving, and it is best to replace the wiper arm in such cases. 3. In some situations, such as when the wiper causes a foggy, water-beaded, streaky, or partially blurred windshield, this is due to oil film, dirt, or wax buildup. Simply cleaning the windshield and wiper blade will resolve the issue.
17
3
Share

What Causes Compressor Failure?

Compressor failure is caused by liquid slugging, oil shortage, and insufficient lubrication. Below is an analysis of compressor damage: 1. Liquid Slugging: A phenomenon where liquid refrigerant and lubricating oil are drawn into the compressor cylinder along with gas, damaging the suction valve plates. Reducing or preventing liquid from entering the cylinder can avoid liquid slugging, making it entirely preventable. 2. Oil Shortage and Insufficient Lubrication: The compressor is a high-speed, complex machine. Ensuring adequate lubrication of moving parts such as the crankshaft, bearings, connecting rods, and pistons is a basic requirement for maintaining normal operation.
3
5
Share

No Sound When Navigation is Connected to Car Bluetooth?

Phone call volume is not turned on. The volume of the car navigation system is not activated. Below is an analysis of why there is no sound when navigation is connected to car Bluetooth: 1. Solution: Go to the phone's Bluetooth settings, click the gear icon next to the paired device, and turn on "Call Audio" and "Media Audio." 2. Reason: This might be because when you got in the car, your phone's volume needed to be turned on again. Often, it automatically resets to 0, so naturally, there's no sound. Gradually increase the volume a little, and you'll know if there's sound.
1
4
Share

What number to call when a car is blocking the entrance?

Call 110 or 122, the traffic police hotline. Below is the analysis of making the call: 1. Procedure: Directly dial 110 or 122 to report to the police, provide the license plate number of the vehicle, and the traffic police will help you contact the owner to request moving the car. 2. Reason: By calling 110 or 122 and informing the operator that your car is blocked by a certain license plate number at a specific location, the traffic police will quickly contact the owner to move the vehicle. The traffic police indicate that upon receiving a request for vehicle removal, 110 will first notify the local traffic police department, which will then inform the squadron to contact the owner.
2
0
Share

Is the Honda Inspire's engine the same as the Accord's?

Honda Inspire shares the same engine with the Accord, both equipped with a 1.5T turbocharged engine, along with identical chassis and transmission. Below are some key details about the Inspire: 1. Stylistically, the Inspire leans more towards a sporty aesthetic compared to the Accord. This is evident from the bold grille design on both sides of the front fascia, featuring more expressive elements, while chrome accents further enhance its muscular appeal. 2. The side profile showcases sharp lines complemented by a fastback-style roofline and large stylish wheels, giving it a strong coupe-like presence. At the rear, the distinctive "boomerang"-shaped taillights offer excellent visual impact when illuminated. The most eye-catching feature is the dual exhaust setup, which adds a bold and dynamic touch. 3. The 8-inch freestanding LCD display on the dashboard adopts a physical button layout, offering a clean interface and responsive operation for easy usability. Additionally, the new model comes with built-in AutoNavi maps, enhancing the accuracy of its onboard navigation system.
13
4
Share

What is the fuel consumption per 100 kilometers for a 2.0T car?

2.0T version engines have a combined fuel consumption of around 11L per 100 kilometers. The following is an analysis of the combined fuel consumption for 2.0T engines per 100 kilometers: 1. Different models: The fuel consumption of 2.0T engines is influenced by factors such as the vehicle model, driving conditions, transmission technology, and driving habits, resulting in varying fuel consumption for each user. 2. Reasons: The BMW B48 2.0T version engine is developed based on BMW's B platform, representing a brand-new inline 4-cylinder engine. The Volkswagen EA888 2.0T version engine was introduced back in 2011, and the fourth-generation 2.0T version engine utilizes a dual-cycle switching system, with a compression ratio increased to 11.7:1 and a thermal efficiency as high as 38%.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.