What are the body dimensions of the Zotye Z700?

2 Answers
VonGideon
07/24/25 6:48am
The body dimensions of the Zotye Z700 are: length 5020 mm, width 1877 mm, height 1469 mm. It is a mid-to-large-sized sedan with a wheelbase of 3000 mm. The Zotye Z700 is equipped with a 1.8L turbocharged engine, delivering a maximum horsepower of 177 hp and a maximum torque of 245 Nm. The maximum torque is achieved between 2000 to 4000 rpm. It is paired with either a 5-speed manual transmission or a 6-speed dual-clutch transmission. The front suspension of the Zotye Z700 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The drivetrain configuration is front-engine, front-wheel drive.
Was this review help?
20
5
Share
Queiroz
08/11/25 2:34am
As an avid car enthusiast, I'm very familiar with the body dimensions of the Zotye Z700: this mid-to-large sedan measures 5000mm in length, 1877mm in width, 1469mm in height, with a wheelbase reaching 3000mm. Such generous dimensions make it stand out among its peers, offering exceptionally spacious seating - the rear legroom is so ample that three adults can sit comfortably without crowding; plus the large trunk capacity is perfect for luggage on long journeys. However, the larger size comes at the cost of maneuverability - it has a wide turning radius in urban driving, requiring extra caution from beginners when parking. Having driven it several times, I found it delivers excellent stability at highway speeds, remaining unfazed by crosswinds or rain, but becomes challenging in tight parking spots, with slightly higher fuel consumption too. Ultimately, dimensions represent the crucial trade-off between space and agility.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

How is the Aisin 8AT transmission?

The Aisin 8AT transmission performs quite well in terms of overall performance. One of its key features is the ability to minimize vehicle wear while maintaining the car's overall performance. The Aisin transmission excels in smoothness, meaning there is no noticeable jerkiness when shifting gears. The transmission is a crucial component in a vehicle. In daily driving, if the transmission responds slowly, the overall smoothness of the vehicle can be significantly compromised, and low transmission efficiency can lead to increased fuel consumption. The Aisin 8AT transmission uses planetary gears and a torque converter to perform gear shifts, replacing the clutch in manual transmissions and freeing the driver's left foot.
8
0
Share

What does autohold mean in a car?

Autohold in a car refers to the automatic parking system, which can adjust the optimal driving state according to different road conditions. It effectively prevents frequent gear shifts in poor road conditions and serves as a forced downshift during overtaking. When the hold button is pressed in D gear, the transmission will remain in second, third, or fourth gear. Autohold is a technical application that enables the automatic handbrake function while the car is in motion. This technology allows drivers to avoid prolonged braking when the vehicle is stationary and prevents unnecessary coasting when the automatic electronic parking brake is engaged, making it particularly useful for uphill and downhill driving as well as frequent starts and stops.
11
2
Share

What does EBD mean on a car?

EBD in a car is an auxiliary function of ABS. It adds a control software to the ABS control computer, with the mechanical system being completely consistent with ABS. As an effective supplement to the ABS system, it is generally used in combination with ABS to enhance its effectiveness. With the assistance of the EBD system, braking force can be utilized more efficiently, significantly reducing braking distance while maintaining vehicle stability during braking. When braking in curves, it helps maintain vehicle stability, enhancing safety during cornering. Even if the vehicle's ABS fails, EBD can ensure that the vehicle does not experience incidents such as rollovers caused by tailspin.
15
1
Share

How is the quality of the Ford Taurus?

The Ford Taurus is excellent, inheriting Ford's quality. The entire lineup is equipped with a power-upgraded fourth-generation 2.0-liter twin-scroll turbocharged engine, delivering up to 180 kW of power and a peak torque of 390 Nm, paired with a new 8-speed automatic transmission. The combined fuel consumption under standard driving conditions is 7.2 liters per 100 kilometers. The Ford Taurus is the flagship model launched by Changan Ford, inheriting the traditional chassis tuning style of the Ford brand. The front suspension uses a conventional MacPherson independent suspension, while the rear suspension features a multi-link independent suspension, equipped with an EShifter rotary electronic gear selector, enhancing the driving and control experience.
18
4
Share

How is the Mercedes-Benz 1.5T Engine?

Mercedes-Benz 1.5T engine is quite good. This engine adopts technologies such as all-aluminum cylinder block, 48V electrical system, variable valve lift, electric water pump, and has been optimized in cylinder lubrication and fuel supply system. The Mercedes-Benz 1.5T engine employs dual-scroll technology in the exhaust system, where the exhaust from cylinders 1 and 3 and cylinders 2 and 4 converge separately. This design effectively improves exhaust efficiency and avoids exhaust interference. To make the engine structure more compact, the Mercedes-Benz 1.5T engine uses a water-cooled intercooler, reducing the engine size while shortening the intake path and improving air cooling efficiency, which helps enhance the engine's power output and response speed.
19
4
Share

How is the Honda CVT transmission?

Honda's CVT transmission is generally quite reliable. The main reason for its reliability lies in its simple structure, with the primary components being the pulley and steel belt, which are less prone to damage and quite durable. The formal name for a continuously variable transmission is stepless transmission, which is divided into variable-angle type CVT and conventional CVT. The difference between a CVT and a regular automatic transmission is that it eliminates the complex and bulky gear combination for speed change. The core component of the CVT is two sets of pulleys, which change speed by altering the contact radius of the metal belt between the driving and driven pulleys. Since the CVT can achieve continuous changes in the transmission ratio, it provides the best match between the transmission system and the engine's operating conditions, improving the vehicle's fuel economy and power performance, as well as enhancing the driver's ease of operation and passenger comfort. Therefore, it is an ideal automotive transmission device.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.