What are the body dimensions of the XPeng P7?

1 Answers
ChloeFitz
07/30/25 2:03am
XPeng P7 is positioned as a mid-to-large-sized coupe with a body length of 4880 mm. Below is a related introduction to the XPeng P7: 1. Design Concept: The XPeng P7 is positioned as a mid-to-large-sized coupe. The new car adopts the "Interstellar" series design language, featuring a closed front grille paired with a full-width light strip, giving it a strong technological feel. The fastback design perfectly matches its coupe identity and positioning. 2. Performance: The drag coefficient of the XPeng P7 is only Cd0.236, which is the lowest record among domestic Chinese cars, significantly enhancing its range capability.
Was this review help?
4
1
Share
More Forum Discussions

What is the length of the Subaru Forester in meters?

According to official data, the Subaru Forester has an overall length of 4640mm, a width of 1815mm, and a height of 1730mm. The relevant introduction of the Subaru Forester is as follows: Appearance: The 09 Forester is equipped with high-brightness LED headlight assemblies, providing better illumination for the driver. Compared to the 09 Forester sold in Japan, the 09 Forester introduced in China does not have auxiliary rearview mirrors installed, but it includes features such as headlight washers and water-repellent mirrors. Power: The 09 Forester offers two engine options, one being a horizontally opposed 2.0-liter DOHC 16-valve gasoline engine. Under the influence of the "Variable Valve Timing Electronic Control System," it not only increases engine power but also maximizes fuel efficiency.
5
0
Share

Why does the Audi A4L make a gurgling sound at idle?

Audi A4L has abnormal noise at idle due to incomplete combustion of gas and prolonged idling. Below are the specific reasons: Incomplete combustion of gas: When the engine is idling, the mixture of gasoline and air in the combustion chamber cannot be completely burned, resulting in abnormal noise at the exhaust pipe. Prolonged idling: Long-term idling of the vehicle leads to excessive carbon deposits and dirt in the engine throttle and intake tract, reducing the area of the intake passage. This causes the vehicle's computer control unit to be unable to precisely control the intake volume, resulting in either too high or too low mixture concentration. The engine shakes due to abnormal combustion, and internal components such as the starter claw, half-moon key, crankshaft pulley, gasket, and motor belt collide with each other, generating abnormal noise.
7
3
Share

Can Windshield Washer Fluid Be Replaced with Mineral Water?

Mineral water should not be directly used as a substitute for windshield washer fluid or washer concentrate. Ordinary mineral water contains many impurities that can accumulate in the rubber pipes over time, leading to clogged pipelines and affecting normal spray function. The details are as follows: 1. Hazards of Long-Term Use of Mineral Water: Prolonged use of tap water or mineral water may increase friction between the glass surface and the wiper blades, causing scratches on the glass. Moreover, plain water can only remove dust superficially and lacks the ability to thoroughly clean dirt or insect residues on the windshield. 2. Winter Precautions: During winter, it is essential to switch to winter-specific windshield washer fluid. Under no circumstances should mineral water or tap water be used as substitutes, as water freezes at 0°C. Frozen water not only prevents spraying but may also cause the windshield washer reservoir and pipelines to crack due to freezing.
18
3
Share

What are the symptoms of non-atomizing fuel injectors?

Symptoms of non-atomizing fuel injectors include: 1. Poor engine combustion, causing shaking and easy carbon buildup; 2. Due to excessively large diesel droplets failing to burn completely, they flow along the cylinder wall into the oil pan, increasing the oil level, reducing viscosity, worsening lubrication, and potentially causing bearing seizure or cylinder scoring accidents. The cleaning method for fuel injectors is: 1. Open the engine hood and hang the cleaning device on the front hood of the car; 2. Remove and block the return pipe from the engine connection point; 3. Remove the fuel inlet pipe from the engine connection point and connect it to the cleaning device outlet pipe; 4. Open the fuel tank cap and remove the fuel pump fuse; 5. Add the cleaning agent to the storage bottle and adjust the pressure regulating valve knob to a smaller position; 6. Connect compressed air to the cleaning device air inlet and increase the pressure regulating valve pressure; 7. Open the cleaning device fuel inlet valve and start the engine.
2
1
Share

What does the LIM button in a car mean?

The LIM button in a car stands for the speed limit function. Pressing this button when the vehicle is stationary will activate the speed limit function. Below are specific details about the speed limit function: 1. Overview of the speed limit function: The speed limit system was first introduced as a standard feature in European-spec F10 models. This system can limit the vehicle speed between 30-230 km/h. When the speed is below the set limit, the vehicle can operate normally. Similar to traditional cruise control systems, the speed limit system uses the engine control system and automatic transmission control system to regulate speed by reducing the torque output requested by the driver. 2. Exceeding the speed limit: If the speed exceeds the set limit, the system will issue a warning. When reaching or exceeding the set speed limit during downhill driving, the active braking mode will not be engaged. If a speed limit lower than the current speed is set during driving, the vehicle will coast until the speed drops below the set limit.
4
1
Share

What are the disadvantages of hybrid cars?

Hybrid cars have the following disadvantages: 1. High cost: The new car price is expensive, resulting in high purchase costs, and the fuel savings are largely offset by the higher initial price; replacing the battery after it ages requires a significant expense, increasing the cost of ownership. 2. Higher failure rate: The dual-drive system increases the vehicle's failure rate, adding another ownership expense. 3. Low resale value: The resale value decreases over time because potential buyers must first consider the cost of battery replacement. Below is related information: 1. Power source: Hybrid electric vehicles use a traditional internal combustion engine (diesel or gasoline) and an electric motor as power sources. Some engines are modified to use alternative fuels such as compressed natural gas, propane, and ethanol. 2. Electric power system: The electric power system in hybrid vehicles includes highly efficient and reinforced electric motors, generators, and batteries. The batteries used include lead-acid, nickel-metal hydride, and lithium-ion batteries, with potential future use of hydrogen fuel cells.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.