What are the body dimensions of the Wuling Rongguang?

2 Answers
LeTucker
07/28/25 3:22pm
The body dimensions of the Wuling Rongguang are 4135 mm in length, 1625 mm in width, and 1870 mm in height, with a wheelbase of 2700 mm. The Wuling Rongguang features a mid-engine, rear-wheel-drive layout. The front suspension is of the MacPherson strut independent type, while the rear suspension is a leaf spring non-independent setup. In terms of power, the Wuling Rongguang is equipped with a naturally aspirated engine that delivers a maximum horsepower of 76 hp, a maximum torque of 135 Nm, and a maximum power output of 56 kW. The engine reaches its peak power at 5600 rpm, and its maximum torque is available between 3600 rpm and 4200 rpm.
Was this review help?
12
4
Share
SanTalia
08/11/25 10:52pm
Speaking of the body dimensions of the Wuling Rongguang, I have to talk about it from a practical perspective. I remember its length is usually around 4.4 meters, width about 1.68 meters, and height around 1.85 meters. This size is very well-designed, offering a super-large cargo space. I often use it to transport construction materials or agricultural products—after folding the rear seats, it can hold several large boxes. The wheelbase is approximately 2.75 meters, making the driving experience spacious, but extra caution is needed when turning to avoid scraping. Additionally, the height ensures that passengers won’t hit their heads on the ceiling and have ample legroom. Overall, the dimensional advantages make it highly versatile in both urban and rural areas, whether for loading bulky items or daily driving—it’s quite hassle-free and efficient.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

What Causes High Engine Coolant Temperature?

High engine coolant temperature is generally caused by the following reasons: 1. Low coolant level in the radiator. The engine is cooled through a water-cooling system. Although the coolant in the radiator depletes slowly, it still decreases over time. Some car owners neglect to check the coolant level, leading to prolonged low levels and high engine temperature. 2. Thermostat failure. This type of fault may prevent the thermostat from opening, hindering the cooling system's ability to circulate coolant properly, resulting in high temperature. 3. Leaking hoses. If you notice water leakage while driving, check if the hoses are aged or cracked. This issue is relatively easy to detect, and replacing the affected hoses at a repair shop should resolve it. 4. Poor radiator cooling efficiency. Some car owners use plain water instead of coolant, which can cause rust buildup in the engine and radiator over time, reducing cooling efficiency. To fix this, the rust must be removed, and the radiator should be cleaned or replaced. 5. Water pump failure. The water pump is the core of the car's cooling system. Most modern cars use impeller-type pumps, which can wear out after prolonged use, disrupting water circulation and causing high temperatures. 6. Cylinder head gasket deformation. If the engine's cylinder head gasket is deformed or damaged, small amounts of coolant may leak into the combustion chamber. This leads to coolant loss and high temperatures after driving for some time.
9
4
Share

What type of engine oil is used for Changan Lingxuan?

The dedicated engine oil model for Changan Lingxuan is: AZO1G; The role of engine oil lubricant for Changan Lingxuan is to lubricate and clean the engine. 1. It can be divided into three types: mineral oil, synthetic oil, and semi-synthetic oil. 2. Engine oil is extremely important for Changan Lingxuan. When choosing, never opt for inferior oil products. Inferior oil products can cause severe wear to the Changan Lingxuan engine, affecting its normal operation. 3. It is recommended to use fully synthetic oil for Changan Lingxuan maintenance; synthetic oil has a wider temperature range, longer service life, and higher cost. For the same oil film requirements, synthetic oil can achieve this with lower viscosity, whereas mineral oil requires a relatively higher viscosity to meet such requirements. 4. In the same working environment, synthetic oil has a much longer service life than mineral oil, thus it is more costly. However, when comparing the number of oil changes, it is not much higher than mineral oil.
16
3
Share

What engine does the Baojun 310 use?

Baojun 310 is equipped with a 1.2L naturally aspirated engine and a 1.5L naturally aspirated engine. The 1.2L naturally aspirated engine has a maximum torque of 116 Nm, with the maximum torque speed ranging from 3600 to 4000 rpm; the 1.5L naturally aspirated engine has a maximum torque of 147 Nm, with the maximum torque speed also ranging from 3600 to 4000 rpm. The following is relevant information about the Baojun 310: The dimensions of the Baojun 310 are 4032mm in length, 1680mm in width, and 1470mm in height, with a wheelbase of 2550mm. The Baojun 310 offers a conventional trunk volume of 200L. To meet the loading needs of large items, the rear seats of the Baojun 310 feature a 4/6 split-folding design, which can create a completely flat space, expanding the maximum volume to 1000L.
11
3
Share

Why Can't the Car Door Be Opened from the Inside?

If you encounter a situation where the car door cannot be opened from the inside, it may be caused by the following reasons: 1. If only the rear door cannot be opened from the inside, it is most likely due to the child lock being activated. The correct solution is to open the door from the outside first, then turn off the child lock switch to resolve the issue. 2. The central locking system is not unlocked. Check if the central locking switch is in the unlocked state. If only one specific door cannot be opened, it might be due to a malfunction in the central locking motor of that door, preventing the door lock from releasing when unlocked. 3. If the above reasons are ruled out, it could also be that the internal door handle switch hook has come off. In such cases, it is necessary to visit a repair shop to remove the door trim panel for inspection and resolution.
16
4
Share

How often should the brake fluid be replaced for Haval F5?

Haval manufacturer recommends replacing the brake fluid every 40,000 kilometers. The process of replacing brake fluid is complex and cumbersome, requiring professional equipment and tools, so it is advisable to have it replaced by professional technicians at a 4S shop or auto repair shop. Below is relevant information about brake fluid: Brake fluid, also known as hydraulic brake fluid, has incompressible properties that allow it to directly transmit the pressure output from the brake master cylinder to the brake wheel cylinders. Therefore, brake fluid serves as the medium for transmitting braking pressure in the automotive braking system. Generally, brake fluid should possess the following characteristics: 1. Good low-temperature fluidity. 2. High boiling point and no vapor lock at high temperatures. 3. Brake fluid should not cause corrosion or deterioration of metal parts and rubber components.
8
0
Share

Where is the standard placement for a car fire extinguisher?

There are four standard locations for placing a fire extinguisher in a car: 1. Under the driver's seat. 2. Under the front passenger seat. 3. The trunk. 4. Outside the vehicle (typically for large trucks, which have dedicated fire extinguisher brackets). Additional information on fire extinguishers: 1. Family cars are usually equipped with a 2kg dry powder fire extinguisher, which has relatively poor fire suppression effectiveness; it is recommended to upgrade to a 4kg model. 2. During transportation and storage, fire extinguishers should avoid being placed upside down, exposed to rain, direct sunlight, strong radiation, or contact with corrosive substances. 3. The storage environment temperature for fire extinguishers should be between -10°C and 45°C. 4. The placement area should remain dry and well-ventilated to prevent moisture corrosion of the cylinder.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.