What are the body dimensions of the Weilin V5?

2 Answers
VanRylee
07/25/25 1:58am
The length, width, and height of the Weilin V5 are 4662 mm, 1820 mm, and 1590 mm respectively, with a wheelbase of 2800 mm. Below is the relevant introduction of the Weilin V5: 1. The Weilin V5 is an MPV model, equipped with three engines: a 1.8-liter naturally aspirated engine, a 1.9-liter diesel turbocharged engine, and a 2.0-liter naturally aspirated engine. 2. The 2.0-liter naturally aspirated engine delivers a maximum power of 139 horsepower and a maximum torque of 182 N·m. This engine can output its maximum power at 5750 rpm and its maximum torque between 4300 to 4500 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 3. The 1.9-liter turbocharged diesel engine produces a maximum power of 126 horsepower and a maximum torque of 271 N·m. This engine can output its maximum power at 4000 rpm and its maximum torque at 2000 rpm. It employs direct fuel injection technology and uses a cast iron cylinder head and block.
Was this review help?
16
4
Share
GemmaRose
08/10/25 4:21pm
The body dimensions of the Rely V5 are approximately 4700mm in length, 1800mm in width, and 1700mm in height, which makes me feel quite stable when driving. As a seasoned driver with over ten years of experience, I have previously used this model. Turning on city roads isn't too difficult, and the body length of around 4.7 meters is slightly larger than a sedan but still manageable when parking. The width and height add to the interior space, comfortably seating three people in the back without feeling cramped, and the trunk can hold a lot of luggage. On the highway, the wind resistance is well-controlled, and the body doesn't feel unstable. However, beginners might need some time to adjust to the size, so I recommend opting for a model with a rearview camera. Overall, these dimensions strike a good balance between daily practicality and comfort, and I would recommend it to friends looking for a well-rounded vehicle.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

What are the hidden functions of the Sylphy Classic?

The hidden functions of the Sylphy Classic include one-touch window lift and automatic unlocking when the engine is turned off. One-touch window lift: When the key is in the ON position, during startup, or while driving, pull up the switch for the left front window until the glass reaches the top and hold for 5 seconds to activate one-touch window lift. For one-touch window down, perform the opposite action—hold down the left front window switch until the glass reaches the bottom and hold for 5 seconds. Taking the Sylphy 2021 Classic 1.6XL Manual Luxury Edition as an example, it is a compact car under Dongfeng Nissan, equipped with a 1.6L engine and a 5-speed manual transmission. The body type is a 4-door, 5-seater sedan, with a front MacPherson independent suspension and a rear torsion beam non-independent suspension, featuring front-wheel drive.
17
5
Share

Where is the cabin air filter of the Haval F7 located?

Haval F7's cabin air filter is located behind the glove box on the passenger side. To replace the cabin air filter, you need to remove the glove box first, then you'll see the cover plate of the cabin air filter. After removing the cover plate, you can replace the cabin air filter. The function of the cabin air filter is to filter the air entering the cabin from outside, improving air cleanliness and providing a good air environment for passengers, protecting their health. Taking the 2021 Haval F7 2WD i-Fan as an example, it is a compact SUV under Great Wall Motors, equipped with a 2.0T engine matched with a 7-speed dual-clutch transmission. In terms of suspension system, the front suspension is MacPherson independent suspension, and the rear suspension is double-wishbone independent suspension.
9
4
Share

What is the engine displacement limit for motorcycles that can be driven with a Class E driver's license?

A Class E driver's license allows the holder to operate all two-wheeled motorcycles. The vehicle types permitted under a Class E license include ordinary two-wheeled motorcycles, specifically: 1. Two-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed exceeding 50km/h; 2. Motorcycles with an engine displacement of 50ml or less and a maximum design speed of 50km/h or less. A Class D license permits the operation of vehicles allowed under a Class E license, meaning it can drive three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed exceeding 50km/h. Additionally, it allows driving all vehicles permitted under both Class E and Class F licenses, which includes all two-wheeled motorcycles.
4
2
Share

What is the difference between the Tiguan and the Touareg?

The difference between the Tiguan and the Touareg is in their names; in fact, they are the same vehicle. Tiguan is the official name, while Touareg is the name registered in China. The Tiguan is a compact 5-door, 5-seat SUV with body dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, a wheelbase of 2684mm, and a fuel tank capacity of 63 liters. In terms of power, the Tiguan is equipped with a 1.8T turbocharged engine and a 6-speed automatic transmission, delivering a maximum power of 118 kW and a maximum torque of 250 Nm. For suspension, the front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension.
13
1
Share

What is the function of a bumper?

The function of a bumper is to absorb and mitigate external impact forces, protecting the front and rear parts of the vehicle body, serving as a safety device. Bumpers have the capability to reduce injuries to occupants during high-speed collisions and are increasingly designed for pedestrian protection. In addition to maintaining their original protective functions, the front and rear bumpers of cars also aim for harmony and unity with the vehicle's styling and pursue lightweight design. The front and rear bumpers of cars are made of plastic, commonly referred to as plastic bumpers. Typically, a car's plastic bumper consists of three parts: the outer panel, cushioning material, and crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by stamping cold-rolled steel sheets into a U-shaped channel; the outer panel and cushioning material are attached to the crossbeam.
8
3
Share

Where is the Cadillac Radiator Located?

Taking the Cadillac XT5 as an example, the radiator is located in front of the engine and behind the bumper. The car radiator, also known as the heat exchanger, is part of the vehicle's cooling system. The radiator in the engine's water cooling system consists of three parts: the inlet chamber, the outlet chamber, the main plate, and the radiator core. For instance, the Cadillac XT5 2021 2.0T Two-Wheel Drive Fashion model is a mid-size SUV under SAIC General Motors Cadillac, equipped with a 9-speed automatic manual transmission. In terms of body dimensions, the car measures 4813 mm in length, 1903 mm in width, and 1682 mm in height. The body type is a 5-door, 5-seat SUV, with a whole vehicle warranty of three years with unlimited mileage.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.