What are the body dimensions of the Volkswagen Touareg?

How to Read a Tire Pressure Gauge?

The method to read a tire pressure gauge is as follows: 1. The tire pressure gauge has two scales, one is in imperial units (pounds per square inch), and the other is in metric units (kilograms per square centimeter); 2. Observe where the pointer points to determine the pressure. The hazards of overinflated tires include: 1. Reduced friction and adhesion of the tire, affecting braking performance and tire lifespan; 2. Decreased resistance to punctures, increasing the risk of a blowout; 3. Accelerated wear on the central tread pattern, reducing tire lifespan, increasing vehicle vibration, and affecting the lifespan of other components; 4. Excessive stretching and deformation of the tire cords, reducing elasticity and increasing the load on the tire while driving, thereby decreasing puncture resistance; 5. Increased susceptibility to punctures from sharp objects like nails or glass, leading to internal cracks or blowouts upon impact.

16

3

Share

What are the symptoms of a failed charcoal canister?

Symptoms of a failed charcoal canister include: abnormal driving noise, jerking during sudden acceleration, noticeable gasoline odor, weak acceleration, fluctuating engine idle speed, engine stalling, and difficulty starting. The functions of the charcoal canister are: 1. To reduce gasoline evaporation from the fuel tank and carburetor; 2. To absorb fuel particles through active materials inside the canister. The principle of the charcoal canister is that after the engine is turned off, gasoline vapor mixes with fresh air inside the canister and is stored in the activated charcoal canister. When the engine starts, the solenoid valve between the activated charcoal canister and the intake manifold opens, allowing the gasoline vapor in the activated charcoal canister to be drawn into the cylinder by clean air under the vacuum of the intake pipe for combustion.

20

3

Share

What is the method for testing the quality of the carbon canister solenoid valve?

The method for testing the quality of the carbon canister solenoid valve is: 1. When the vehicle experiences fuel pump nozzle tripping during refueling, the carbon canister is filled with gasoline, there is weak acceleration, jerking, unstable idle speed fluctuating up and down; 2. If the engine stalls and cannot start, or there are abnormal noises while driving, it indicates that the carbon canister solenoid valve is damaged. The solutions for a damaged carbon canister solenoid valve are: 1. Clean the fuel tank exhaust system; 2. Clean or replace the carbon canister solenoid valve. The working principle of the carbon canister solenoid valve is: It controls the purging function of the carbon canister through pulse width modulation. The ECU computer, based on different engine operating conditions, grounds the solenoid valve circuit at a certain frequency to open or close it. The ECU computer controls the vacuum purging of the carbon canister by operating the normally closed solenoid valve.

2

1

Share

What brand is the Sylphy's transmission?

Sylphy's transmission is an Aisin transmission. The functions of the transmission are: 1. Changing the transmission ratio; 2. Expanding the torque and speed of the driving wheels; 3. Enabling the car to reverse; 4. Facilitating gear shifting or power output. Taking the 2021 Sylphy as an example, it is a compact car with body dimensions of: length 4631mm, width 1760mm, height 1503mm, and a wheelbase of 2700mm. The 2021 Sylphy is equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 122ps, maximum torque of 155nm, maximum power of 90kw, and is paired with a 5-speed manual transmission.

10

1

Share

How long does it take to charge a car battery after jump-starting?

After jump-starting a car with a dead battery, it needs to be charged for 2 to 3 hours. The maintenance methods for the battery are: 1. Charge the battery promptly when the ammeter indicates insufficient power; 2. Adjust the electrolyte density according to the standards for different regions and seasons; 3. Add distilled water or a special replenishing fluid when the electrolyte is low; 4. The total duration of starting the car each time should not exceed 5 seconds; 5. If the battery is not used for a long time, start the car periodically; 6. Regularly check if the small holes on the battery cover are ventilated; 7. Inspect the positive and negative terminals for oxidation; 8. Check all parts of the circuit for aging or short circuits.

18

0

Share

What is the function of a compressor?

The function of a compressor is to regulate the start-stop state of the air compressor, allowing it to rest by adjusting the pressure in the air storage tank, which has a maintenance effect on the engine. The working principle of a compressor is to draw refrigerant from the low-pressure area, compress it, and then send it to the high-pressure area for cooling and condensation. The heat is dissipated into the air through the radiator, and the refrigerant changes from a gaseous state to a liquid state, with an increase in pressure. The types of compressors include: swash plate compressors, vane compressors, scroll compressors, and crankshaft connecting rod compressors. The causes of compressor damage are: 1. Damage to the electromagnetic clutch inside the air conditioning compressor or internal wear of the compressor; 2. Refrigerant leakage; 3. Damage to the compressor capacitor.

10

2

Share

What are the body dimensions of the Volkswagen Touareg?

How to Read a Tire Pressure Gauge?

What are the symptoms of a failed charcoal canister?

What is the method for testing the quality of the carbon canister solenoid valve?

What brand is the Sylphy's transmission?

How long does it take to charge a car battery after jump-starting?

What is the function of a compressor?

What car brand has a cross logo?

Should Subaru Use 92 or 95 Octane Gasoline?

What is the method for converting tire pressure values?

What are the differences between Skoda Kodiaq and Kodiaq GT?