What are the body dimensions of the Volkswagen Tayron 2021 model?

1 Answers
DanielaAnn
07/30/25 4:49am
Volkswagen Tayron body dimensions are: length 4589mm, width 1860mm, height 1660mm, wheelbase 2731mm, front track 1576mm, rear track 1566mm. Volkswagen Tayron's body size: The market positioning of the Volkswagen Tayron is a midsize SUV. This SUV adopts a 5-door, 5-seat structure, featuring not only large dimensions but also rich configurations, providing a spacious and comfortable seating space. Specific seating space measurement: With the front seat adjusted to the lowest position, a tester with a height of 177cm has 1 fist and 3 fingers of headroom in the front. Keeping the front seat unchanged, there is 4 fingers of headroom and 2 fists of legroom in the rear.
Was this review help?
16
4
Share
More Forum Discussions

What is the fuel tank capacity of the Magotan?

The fuel tank capacity of the Magotan is 66 liters. Taking the 2020 Magotan as an example, it is a mid-size sedan with the following dimensions: length 4865mm, width 1832mm, height 1471mm, wheelbase 2871mm, and a curb weight of 1445kg. The 2020 Magotan features a front MacPherson strut independent suspension and a rear multi-link independent suspension, with a front-wheel-drive layout. It is equipped with a 1.4T turbocharged engine producing a maximum horsepower of 150PS, maximum torque of 250Nm, and maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
9
2
Share

How Often Should Coolant Be Replaced in a New Car?

New cars typically require coolant replacement every two years or every 30,000 kilometers. The original factory coolant in new cars is of high quality and won't show signs of boiling over or freezing cracks. The coolant replacement method is as follows: Before completely replacing the coolant, conduct a thorough inspection first to check for any signs of leakage or cracks in all pipes, with a focus on the five-way water pipe. The coolant is distributed to different parts of the car to function after flowing through the five-way pipe. If there is any leakage of coolant in this part, replace the water pipe or re-secure the connection as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continuously pour water into the reservoir so that it flows through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out from the reservoir will be slightly pinkish. Continue adding clean water until the water coming out is clear. Note: Don't forget to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose, then add another container of coolant to the coolant reservoir until it's nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as some air is expelled from the cooling system. Add more coolant until it reaches the "MAXT" mark on the reservoir.
20
2
Share

What are the effects of a clogged particulate filter in the Tiguan L?

Tiguan L particulate filter clogging will reduce vehicle power and increase fuel consumption. Reduced vehicle power: If the particulate filter is clogged, some models will automatically reduce the engine's power output. At the same time, increased exhaust resistance may also weaken the vehicle's dynamic performance, requiring immediate attention. Increased fuel consumption: After the particulate filter is clogged, it increases exhaust resistance. When the vehicle's power weakens, the driver may need to press the accelerator more to maintain speed, leading to higher fuel consumption. The methods for dealing with clogged particulate filters differ between diesel and gasoline vehicles, as follows: For diesel vehicles, simply press the regeneration button on the car. The engine will then increase its RPM while stationary, and generally, within about ten minutes, the particulate filter will be cleaned, resolving the clogging issue. For gasoline vehicles, the owner should first shift the car into S mode, then drive at high speed for a period. During high-speed driving, the exhaust pipe temperature rises, burning off the clogged particles in the particulate filter, thus solving the clogging problem. If the particulate filter is severely clogged and the above methods do not resolve the issue, the particulate filter can be taken to a car repair shop or 4S store for professional cleaning with specialized equipment.
13
0
Share

What is the appropriate lumen value for car LED lights?

Car LED headlights' suitable lumen value should be determined based on the situation: LED car lights produce 91 lumens per watt, so 35W corresponds to 3200 lumens. High beams typically range from 35-60W with lumen values of 3400-5900, while low beams range from 35-55W with lumen values of 3400-5400. The lumen range of 3500-5500 is suitable for headlights, commonly known as "headlamps," which are installed on both sides of the front of the car to illuminate the road ahead. They can be configured as either two-lamp or four-lamp systems. In a four-lamp system, the outer pair should be dual-beam lamps for low and high beams, while the inner pair should be single-beam lamps for high beams only. The functions of car LED lights are: Activating turn signals to alert following vehicles and reduce rear-end collisions; Improving visibility of road conditions to enhance driving safety; Informing vehicles behind that the car is braking, prompting them to slow down; Turning on hazard lights during temporary stops, emergencies, or poor visibility conditions to alert oncoming traffic. Maintenance methods for car LED lights: Regularly check the lamp covers to avoid moisture buildup; Replace the lights periodically; Adjust the height of the lights properly; Use high-quality bulbs when replacing lights; Prevent foreign objects from hitting the lights.
20
3
Share

Is the Roewe RX5 a domestic or joint-venture car?

Roewe RX5 is not a joint-venture car but belongs to a domestic independent brand. Roewe is a new independent brand launched by SAIC after acquiring the technology and production line of British Rover in 2005. The SAIC Roewe RX5 is an internet SUV that went on the market in 2016. The vehicle adopts the 'Blue Core' high-efficiency power technology, equipped with two turbocharged direct injection engines: a 2.0T and a 1.5T. The 2.0T engine has a maximum power of 220 horsepower and a peak torque of 350 Nm, with a minimum comprehensive fuel consumption of 8.1L per 100 km. The 1.5T engine has a maximum power of 169 horsepower and a peak torque of 250 Nm, with a comprehensive fuel consumption of only 6.8L per 100 km, paired with a 6-speed dual-clutch transmission. The Roewe RX5 features intelligent real-time four-wheel drive, a fully independent suspension system, and a four-way high-speed CANBUS system bus, comprehensively enhancing the driving and riding quality. The new car inherits Roewe's Rhythm design language, with a standard new-generation Rhythm Pro wing grille, a wheelbase of 2700mm, and the largest panoramic sunroof in its class with an opening area of 0.86m.
19
2
Share

Which brand does SAIC Maxus belong to?

SAIC Maxus is the brand of SAIC Maxus Automobile Co., Ltd., a wholly-owned subsidiary of SAIC Motor Corporation Limited. More information about SAIC Maxus is as follows: 1. The company was established on March 21, 2011. As an international automotive brand under SAIC Group, SAIC Maxus leverages a century of professional expertise to create a full range of specialized commercial vehicles: the V80, V90, V100, specialized school buses, all-terrain MPVs, the G10, and other customized vehicles. Its product portfolio includes RVs, wide-body light passenger vehicles, pickup trucks, SUVs, and MPVs. 2. SAIC Maxus operates Wuxi Shenlian Special Purpose Vehicle Co., Ltd., Wuxi Branch, Nanjing Branch, SAIC Maxus RV Technology Co., Ltd., and SAIC Maxus Automotive Sales and Service Co., Ltd. 3. Currently, it owns three major brands: SAIC Maxus MAXUS, LDV, and Istana. It has three production bases in Wuxi, Nanjing, and Liyang. The Wuxi base primarily manufactures SAIC Maxus MAXUS brand products with an annual capacity of 200,000 units; the Nanjing base mainly produces SAIC Yuejin light and medium-duty trucks with an annual capacity of 100,000 units; the Liyang base is the world's largest specialized RV factory with an annual capacity exceeding 25,000 units. Additionally, it has manufacturing bases in Malaysia and Thailand, producing platform products such as the V80, G10, and Istana, covering wide-body and narrow-body light passenger vehicles, light trucks, and specialized modified vehicles.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.