What are the body dimensions of the Volkswagen Polo?

How to Replace the Electronic Rear Brake Pads on a Great Wall H6?

Before replacing and installing the brake pads on a Great Wall Haval H6, first prepare a dedicated set of tools. Use the tools to remove the tire. After removing the tire, you can see the brake disc and caliper. Remove the two screws on the inner side of the caliper, then take off the caliper. Remove the old brake pads. The outer brake pad can be removed by pulling it to the right, the rear brake pad by pulling it backward, and the front brake pad by pulling it left or right. After removing the old brake pads, install the new ones. Once the new brake pads are installed, reattach the caliper and secure it, then reinstall the tire. The entire brake pad replacement process is now complete.

7

5

Share

How to Remove the Steering Wheel on a Changan CS75?

Prepare the tools for removing the steering wheel. Generally, there are two types of tools available for this task. The two sets on the left can be used to remove the pulley, while the one on the right is a specialized tool for steering wheel removal. If the vehicle is equipped with an SRS (Supplemental Restraint System), it is advisable to seek professional assistance for safety. If you decide to proceed on your own, first deactivate the SRS system before removing the airbag. Start by removing the outer cover of the steering wheel. If there are no screws on the back, apply a bit of force to detach the cover. After removing the necessary components, you will likely see 2-3 screw holes around the central bolt. These are used for steering wheel removal. Set up the removal tool and secure the two screws. You can use a standard wrench to turn them, which will eventually force the steering wheel out.

6

0

Share

How to Open the Hood of a Cavalier?

The method to open the hood of a Cavalier is: Pull the release lever inside the engine compartment (located on the panel above the driver's left foot), then move to the front of the vehicle below the emblem and flip the secondary hood release to open the engine hood. The Cavalier is a compact 4-door 5-seater sedan with body dimensions of 4474mm in length, 1730mm in width, 1471mm in height, a wheelbase of 2600mm, and a fuel tank capacity of 36 liters. It is equipped with a 1.0T turbocharged engine and a 6-speed automatic transmission, delivering a maximum power of 92 kilowatts and a maximum torque of 180 Newton-meters. The drivetrain is front-wheel drive, with MacPherson strut front suspension and a torsion beam rear suspension.

18

5

Share

How to Use a Car Magnetic Phone Mount?

Locate a suitable position in the front row of the vehicle to install the mount. This position should be convenient for the driver to view and access, and should not interfere with other vehicle functions. After finding the position, use the provided wipe from the kit to clean the area, then use the provided dry wipe to clean it again. Remove the adhesive film from the spherical base and stick it onto the cleaned position. Be sure to press firmly with your hand for about 15 seconds. Once installed, attach the magnetic disc onto the sphere. When in use, bring the metal plate on the back of your phone close to the disc on the sphere to secure it magnetically.

15

3

Share

Why is the fuel consumption of the 2021 Excelle so high?

Excessive engine carbon buildup is a significant reason, primarily due to the use of unsuitable fuel. Once the oxygen sensor is damaged, it will cause an imbalance in the engine's fuel-air mixture, leading to a sudden increase in fuel consumption. The oxygen sensor should be replaced immediately if damaged. The oil filter, air filter, and fuel filter must be replaced regularly. Failure to replace them for an extended period will result in incomplete fuel combustion and increased engine carbon buildup. You can add fuel cleaner additives, and it's best to drive on the highway for a while, as this helps increase exhaust flow and allows stronger airflow to remove larger carbon particles.

19

4

Share

Where is the hazard warning light switch located?

The hazard warning light switch is located on the center console, marked with two overlapping red triangles. Turn on hazard lights during rain to alert other vehicles of your presence. In case of emergency breakdown while driving, activate hazard lights along with headlights and use horn signals.

5

2

Share

What are the body dimensions of the Volkswagen Polo?

How to Replace the Electronic Rear Brake Pads on a Great Wall H6?

How to Remove the Steering Wheel on a Changan CS75?

How to Open the Hood of a Cavalier?

How to Use a Car Magnetic Phone Mount?

Why is the fuel consumption of the 2021 Excelle so high?

Where is the hazard warning light switch located?

What colors are available for the Polo car?

What transmission does the BMW M5 Competition use?

How to adjust before entering an S-curve from parallel parking?

Where does the license plate code 'Ji F' belong to?