What are the body dimensions of the Vios FS?

1 Answers
Grayson
07/29/25 4:49pm
The body dimensions of the Vios FS are 4140mm in length, 1700mm in width, and 1485mm in height, which are official data. The length of the Vios FS refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The Vios FS is equipped with a 1.5L inline 4-cylinder naturally aspirated engine, with a maximum power of 79 kilowatts and a maximum torque of 138 Newton meters. The maximum power speed is 6000 rpm, paired with a 5-speed manual transmission. There are relevant national regulations regarding vehicle dimensions. According to the national standard "GB1589-89", the total width of the vehicle does not include the rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, in the national standard, the significance of vehicle width data lies in providing enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5 meters to meet the usage requirements of public roads.
Was this review help?
20
3
Share
More Forum Discussions

How to Handle Used Car Transactions?

The used vehicle market implements an agency system through operating companies for vehicle title transfers, where the transfer window does not directly handle transactions for consumers. Drive the vehicle to the market, and a used vehicle operating company will act as an agent to complete the transfer procedures: evaluation — vehicle inspection — ticket issuance. Both the buyer and seller need to sign the "Used Vehicle Purchase and Sale Contract," which comes in triplicate. The contract must be filed with the industrial and commercial department before the transfer procedures can proceed. Once the evaluation report is issued, the title transfer process can begin. The completed transfer certificate should be retained by the buyer, and the seller is advised to keep a copy as well.
8
1
Share

How to Replace the Lower Control Arm Ball Joint on a Mercedes-Benz E230?

Loosen the fixing bolts of the lower control arm, but do not remove them completely. Keep a few threads engaged. Use a hammer to strike the indicated position to loosen the ball joint. If you can use a pry bar to create a gap in the ball joint, it means it has loosened. At this point, you can remove the fixing bolt. Use tools to loosen the three fixing bolts underneath. Strike the nuts with a hammer, and once loosened, you can directly remove the bolts and the lower control arm ball joint. Loosen the fixing bolts of the lower control arm, but do not remove them completely. Keep a few threads engaged to avoid thread deformation during hammering.
17
5
Share

How to Apply for the Exemption Period of New Energy Vehicles?

You need to log in to the "Traffic Management 12123" APP, find the [Exemption Vehicle Inspection Mark Application] item, and then you can apply for the inspection mark. Select the motor vehicle that needs to apply for the exemption inspection mark. After carefully reading the business instructions for the exemption vehicle inspection mark application, enter the vehicle information page. After entering the vehicle information page, fill in the information completely, select the mailing address, confirm that the submitted information is correct, obtain the SMS verification code, and pass the verification. After successful submission, you can check the progress of the business processing at any time. The vehicle management office staff will complete the business acceptance within 1 working day.
17
4
Share

Where to Pay the Retake Fee for Subject 2?

The retake fee for driving license Subject 2 can be paid either by yourself or through the driving school or instructor. Only after paying the retake fee can you schedule the next retake. Generally, paying the retake fee through the driving school or instructor will cost more than paying it yourself, as the instructor may charge an additional fee for extra practice sessions due to the retake. Subject 2, also known as the small road test, is the abbreviation for the field driving skills test. Below is an introduction to the content of the subject tests: 1. Subject 1: The written test on road traffic safety laws, regulations, and related knowledge (Subject 1) is conducted on a computer, with a full score of 100, and a passing score of 90 or above (including 90). 2. Subject 2: The field driving skills test (Subject 2) is conducted in a real vehicle on-site, with only pass or fail results. The test includes five mandatory items performed in sequence: reversing into a garage, parallel parking, S-curve driving, right-angle turning, and starting and stopping on a slope. The full score is 100, and a passing score is 80 or above (including 80). 3. Subject 3: The road driving skills test (Subject 3) is conducted on a highway or simulated field in a real vehicle. The full score is 100, with a passing score of 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Subject 4: The written test on safe and civilized driving knowledge (Subject 4) has a full score of 100, and a passing score of 90 or above (including 90).
5
3
Share

How to Replace the Interior Light in a Honda CR-V?

Use a small flat-head screwdriver to pry open the clips from the lower part of the dome light. Once the lower clips are released, you can remove the translucent plastic cover to see the internal structure of the dome light. Avoid touching the middle part with your hands. If there are oil stains or other contaminants on your hands, they may cause localized overheating and damage to the bulb surface when the light is turned on. First, align the two upper clips, then press down the bottom clip to secure it in place. After installing and securing the translucent cover, perform the on/off operation several times to check if the bulb lights up normally and if the cover moves properly.
18
3
Share

Can You Take the Written Test Twice?

The "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" clearly stipulate that the written test (Subject 1) can be taken twice on the same day. If you fail the first attempt, you can take a free make-up test for the second time. If you still fail the second attempt, the Subject 1 test will be terminated, and you can only schedule another test after ten days. Subject 1, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license examination. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer with a time limit of 45 minutes. A passing score for Subject 1 is 90 points. The test consists of 100 questions, including single-choice and true/false questions, with each question worth 1 point (total score: 100 points). If you answer 11 questions incorrectly during the test, the system will automatically submit the test and end the session. Subject 1 test content: Driver's license and motor vehicle management regulations; road traffic conditions and rules; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: Candidates should pay attention to their attire—no slippers are allowed. Electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the examination room. Upon entering, the identity verification desk will assign a seat. After finding your seat, begin the test. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, you can take a make-up test the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can schedule the Subject 1 test. Each subject can be taken once, with one make-up test allowed if you fail. If you do not take the make-up test or fail it, the test session will be terminated, and you must reschedule. For Subject 2 and Subject 3, there are only five test attempts allowed, and rescheduling must be done ten days later. If you fail the Subject 3 safe driving knowledge test, the previously passed road driving skills test results remain valid. There are three subjects in the driver's license test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include "Subject 4."
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.