What are the body dimensions of the V3 Lingyue?

How to reset the tire pressure light on Audi Q7?

Audi Q7 tire pressure light reset steps: 1. Turn on the ignition, switch to the radio interface, and press the MENU button; 2. Rotate the knob to select 'Vehicle', then push the center button to the left; 3. A selection menu will appear, choose 'Maintenance and Inspection', then select 'Tire Pressure Monitoring System', and finally select 'Store'. The Audi Q7 is a mid-to-large SUV with a 5-door, 7-seat body structure. Its dimensions are 5067mm in length, 1970mm in width, and 1731mm in height, with a wheelbase of 2996mm. It is equipped with a 2.0T 245 horsepower L4 turbocharged engine, paired with an 8-speed automatic transmission.

11

5

Share

On what kind of road surfaces are motor vehicles prone to wheel lock-up?

Motor vehicles are prone to wheel lock-up on road surfaces with low friction coefficients, such as icy or snowy roads. Due to the minimal friction generated by such surfaces, when the friction between the brake pads and brake discs exceeds that between the road surface and the wheels, the wheels can lock up and skid. This makes the vehicle highly susceptible to rollover or tipping accidents. A motor vehicle is defined as any wheeled vehicle powered or towed by a propulsion system, designed for passenger transport, goods transportation, or specialized operations on roads, including certain recreational equipment (like electric scooters, electric skateboards, and electric bicycles). They can be categorized into automobiles and automobile trains, motorcycles and mopeds, tractor transport units, wheeled special-purpose machinery, and electric vehicles, among others.

18

0

Share

Should I Press the Brake, Shift to N, or P at a Traffic Light?

When waiting at a traffic light, you should press the brake and shift to N gear. It is strictly prohibited to shift to P gear. The N gear disconnects the power link between the engine and the transmission, and the passive wheel of the torque converter in the transmission is also in an idle state. At this time, it will not increase the resistance of the active wheel connected to the engine, and fuel injection will also be reduced, making it relatively more fuel-efficient. To prevent the car from rolling, you must press the brake or pull the handbrake. For shorter traffic lights, you can simply press the brake while in D gear, which avoids gear shifting and reduces unnecessary wear. The N gear is commonly known as neutral in manual transmission models. In automatic transmission vehicles, it can be used for brief stops, such as waiting at a traffic light.

13

0

Share

Is the Intake Valve Larger or the Exhaust Valve?

The intake valve is larger than the exhaust valve. This is because intake relies on vacuum suction to draw air in, while exhaust is pushed out through compression. Additionally, to allow more fresh air into the engine for improved overall vehicle performance, naturally more intake is required. Automotive valves, also known as throttle valves, are responsible for delivering fuel into the engine and expelling exhaust gases. Structurally, they are divided into intake valves and exhaust valves. The intake valve's role is to draw air into the engine to mix with fuel for combustion, while the exhaust valve's function is to expel the burned exhaust gases and dissipate heat.

4

2

Share

How to Use the Civic's Air Conditioning?

The method to use the Civic's air conditioning: 1. Press and hold the brake pedal, then press and hold the one-touch start button to start the vehicle; 2. Press the power button to activate the air conditioning, and the compressor will begin working. When the compressor first starts, even if it is set to cooling mode, you may feel warm air blowing out. Wait until the water temperature normalizes; 3. There are AUTO buttons on both sides, which control the dual-zone air conditioning for the driver and passenger seats. Use the knobs to adjust the temperature; 4. The recirculation mode circulates the air inside the car, while the fresh air mode maintains external ventilation. The front windshield defogger needs to be manually turned off, and the rear windshield heater will automatically turn off once it reaches a certain temperature.

6

2

Share

How to replace the wiper of the Mazda 3 Axela?

The method to replace the wiper of the Mazda 3 Axela is: 1. Push the wiper lever to the off position, lift the wiper, and pry it up with a key; 2. Then pull the wiper and the wiper arm into a vertical position. There is a fixed groove at the head of the wiper blade. Pull it down hard or pry it with a key, and the entire rubber strip can be pulled out. The wiper is a tool on the front glass of motor vehicles to prevent rain and other dirt from affecting vision for simple cleaning. The length, width, and height of the Mazda 3 Axela are 4662mm, 1797mm, and 1445mm respectively, with a wheelbase of 2726mm, and it is equipped with a 6-speed manual transmission.

7

5

Share

What are the body dimensions of the V3 Lingyue?

How to reset the tire pressure light on Audi Q7?

On what kind of road surfaces are motor vehicles prone to wheel lock-up?

Should I Press the Brake, Shift to N, or P at a Traffic Light?

Is the Intake Valve Larger or the Exhaust Valve?

How to Use the Civic's Air Conditioning?

How to replace the wiper of the Mazda 3 Axela?

How Many Liters is One Small Segment on the Fuel Gauge?

How often does a new car need an annual inspection?

How many liters of engine oil does the Volkswagen Passat require?

Can You Still Drive When the Engine Warning Light Is On?