What are the body dimensions of the Trumpchi GS3?

What does PCV valve mean?

PCV is the abbreviation of POSITIVE-CRANKCASE-VENTILATION in English, which means the positive ventilation control system of the crankcase (or oil pan) in Chinese. The PCV valve consists of a valve body, valve, and valve cover, and cannot be disassembled. The PCV valve is generally installed between the valve rocker cover and the intake manifold. The following is relevant information about the PCV valve: 1. Function of the PCV valve: At the end of the engine combustion process, some unburned mixture leaks into the crankcase under high pressure from the piston rings. These blow-by gases will escape from the crankcase into the atmosphere, causing pollution. If these blow-by gases are not removed, they will also dilute the oil in the crankcase, causing the oil to deteriorate and leading to premature wear of engine components. Therefore, a PCV valve is installed on the valve cover to allow these exhaust gases to re-enter the engine through the intake manifold for re-combustion. 2. PCV valve inspection method: After reinstalling the PCV valve, remove the crankcase intake pipe from the air filter, and lightly cover the pipe opening with a thin piece of paper. When the pressure in the crankcase decreases, the thin paper should be visibly sucked towards the pipe opening. In addition, after stopping the engine, remove the PCV valve and shake it by hand to check. If a "click" sound is heard, it indicates that the PCV valve is flexible and usable.

4

2

Share

What does a displacement of 1998ml mean?

It means the actual displacement is 1998ml, which is the reference standard used by the state when determining tax rates. Additional information is as follows: 1. Introduction to car displacement: Displacement, a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or discharged per stroke or cycle. Car displacement is an important parameter for measuring a vehicle. Some domestic cars do not have the above-mentioned model number on their rear, but their displacement is usually indicated on the body or rear of the car. 2. Displacement classification: The classification of car levels in China is determined by the size of the displacement. The displacement of a mini car is less than or equal to 1.0L; the displacement of an ordinary car ranges from 1.0 to 1.6L; the displacement of a mid-size car ranges from 1.6 to 2.5L; the displacement of a mid-to-high-end car ranges from 2.5 to 4.0L; and the displacement of a high-end car is greater than 4.0L.

10

1

Share

Where is the wiper switch located on a pickup truck?

The wiper switches for the vast majority of vehicles currently on the market are positioned on the stalk behind the steering wheel, typically in a lever-style design. 1. Wiper maintenance: It's essential to keep the wipers clean regularly. Owners can use a damp tissue or cloth to wipe along the rubber blade, removing any accumulated dust. Avoid prolonged contact between the wipers and the windshield. On sunny days, the temperature on the glass can be extremely high, which can severely damage the rubber's elasticity and cause premature hardening. Avoid using ammonia-based cleaners. Laundry detergents or certain household cleaners contain ammonia, which can also harden the rubber blades, making them unsuitable for addition to the wiper fluid reservoir. 2. Wiper usage: When the rain is not too heavy and the windshield isn't densely covered with water, set the wiper stalk to the low-speed intermittent setting, marked as LO or LOW. When the rain intensifies and the windshield quickly becomes covered, significantly impairing visibility, switch the wipers to the high-speed continuous setting, marked as HI or HIGH, to continuously clear water from the windshield.

3

5

Share

What documents should I bring for the first maintenance?

The items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; vehicle purchase invoice. Bring these to the designated first maintenance service provider for the vehicle's initial service. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after the new car has been driven, and the specific timing varies by vehicle, usually after driving 1,000 to 3,000 kilometers. It is essential to attend the first maintenance on time—neither early nor delayed. The completion of the first maintenance marks the end of the vehicle's break-in period, allowing it to operate under standard load and normal speed as required by the car. The first maintenance time is calculated from the date of vehicle pickup. There are two indicators for the first maintenance: mileage and time. Whichever comes first serves as the standard. The first maintenance includes: changing the engine oil and oil filter, cleaning the air filter, checking various fluid levels, inspecting the generator belt and wiper blades for damage, checking tire pressure and condition (e.g., damage or bulges). Time required: Completing all tasks takes approximately 2 hours. The most critical part of the first maintenance for a new car is changing the engine oil and oil filter. When replacing the engine oil, the oil filter must also be changed. The choice of engine oil must refer to the Vehicle Usage and Maintenance Manual, as different models require different oil specifications. Maintenance precautions: Do not rinse the interior of the car with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. It is important to note that the car's interior should not be directly rinsed with water. If the floor mats are dirty, use a vacuum cleaner or take them out, scrub them with a brush and detergent, dry them, and then put them back. There are many drainage holes under the rubber mats on the cabin floor. If water enters, it will not dry naturally but will flow through these holes to areas like the gearbox, causing corrosion. The best practice is to use a vacuum cleaner for cleaning, followed by wiping with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: If the antifreeze level is low, it is recommended to drain the existing antifreeze and refill it with the same brand. Different brands of antifreeze have varying chemical properties, and mixing them may cause corrosion due to incompatible additives. To avoid unnecessary issues, never mix antifreeze brands. Do not lubricate wheel bolts and nuts: When bolts on a moving car rust, some may apply oil to restore functionality. However, lubricating wheel bolts and nuts can pose safety risks. At high speeds, lubricated bolts and nuts may loosen or even fall off, leading to driving hazards. No need to press the accelerator when starting an EFI (Electronic Fuel Injection) car: EFI vehicles differ from conventional cars in that their fuel injection control system automatically adjusts fuel supply based on engine temperature and operating conditions, ensuring smooth startup.

17

1

Share

Should the Transmission Fluid of a Flood-Damaged Car Be Replaced?

No, it is not necessary because the interior of the transmission will not be affected by water, regardless of whether the car has been flooded. Here is some information about automotive transmissions: 1. Function of the Transmission: The transmission alters the gear ratio between the engine and the wheels, allowing the engine to operate under optimal conditions. It enhances the torque and speed transmitted to the drive wheels, enabling different speeds and allowing the car to reverse or idle. 2. Definition of the Transmission: The transmission is a gearbox that changes the gear ratio and direction of motion. Located between the clutch and the central drive, its primary functions are to alter the vehicle's driving force and speed (shifting gears), enable reverse movement (reversing), and allow the engine to idle without stalling (neutral gear).

3

Share

What Type of Fuel Should a Pickup Truck Use?

Pickup trucks in the market are equipped with either diesel or gasoline engines, with diesel models being more prevalent. Key information about pickup trucks is as follows: Functional Advantages of Pickup Trucks: First, they combine the dual characteristics of family cars and commercial vehicles (passenger and cargo use). Second, their diverse configurations cater to a wider range of needs (two-door or four-door, long or short cargo bed, two-wheel or four-wheel drive, gasoline or diesel engines). Compared to sedans, they offer superior load-bearing capacity and off-road capability. Compared to light and mini trucks, they excel in safety and driving comfort. Usage of Pickup Trucks: Pickup trucks can serve as specialized vehicles, multi-purpose vehicles, official cars, business vehicles, or family cars for transporting goods, travel, rentals, etc. The so-called 'pickup truck' is essentially a hybrid of a sedan and a truck. With the growing community of modification enthusiasts, pickup truck customization has become an increasingly popular category. In the United States, pickup trucks are highly popular.

7

2

Share

What are the body dimensions of the Trumpchi GS3?

What does PCV valve mean?

What does a displacement of 1998ml mean?

Where is the wiper switch located on a pickup truck?

What documents should I bring for the first maintenance?

Should the Transmission Fluid of a Flood-Damaged Car Be Replaced?

What Type of Fuel Should a Pickup Truck Use?

How many questions are there in Subject 1 in 2021?

Is the money refundable if the exam appointment is canceled?

Can Flood-Damaged Vehicles Be Transferred and Retitled?

What to Do When the Belt Squeaks After Getting Wet?