What are the body dimensions of the Trumpchi GM6?

2 Answers
PaulRose
07/28/25 10:35pm
The body dimensions of the Trumpchi GM6 are 4780 mm in length, 1860 mm in width, and 1730 mm in height, with a wheelbase of 2810 mm. Below is some relevant information about the Trumpchi GM6: 1. The Trumpchi GM6 is equipped with a 1.5-liter turbocharged engine across all models, delivering 169 horsepower and a maximum torque of 265 Nm. It can output maximum power at 5000 rpm and maximum torque between 1700 and 4000 rpm. 2. The engine features DCVVT technology and direct fuel injection, along with an aluminum cylinder head and a cast iron cylinder block. Although the cast iron block is heavier, it can withstand higher temperatures and pressures, resulting in better reliability and durability. The 1.5-liter turbocharged engine is paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission.
Was this review help?
10
0
Share
MacKarter
08/12/25 3:04am
I'm very familiar with the dimensions of the Trumpchi GM6, as I rely on its spaciousness every time I pick up and drop off my kids. The vehicle has an overall length of 4780mm, a width of 1837mm, a height of 1765mm, and a wheelbase of 2810mm. These dimensions place it in the medium-to-large category among MPVs, making it perfect for weekend outings with the whole family. Even with all seven seats occupied, there's ample legroom, and the back row can comfortably accommodate two child safety seats. The trunk is ingeniously designed—folding down the third row allows enough space for a stroller plus luggage. Once, when picking up relatives from the airport, I managed to fit three large checked suitcases upright with room to spare. The height is just right for easy access, so elderly passengers don't have to bend over when getting in or out, and it navigates urban height-restricted underground parking with no issues.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

How to Turn Off the Daytime Running Lights on the Trumpchi M8?

Insert the ignition key with the ignition switch in the off position. Move the turn signal switch to the left turn position, pull up the high beam and hold it, then turn on the ignition switch. Hold for about 5 seconds until you hear a beep, then release the ignition switch and return it to its original position. The daytime running lights will turn off. Change bit15 group 64 to 24. This method will permanently turn off the daytime running lights.
3
0
Share

How to Open the Trunk of a Lexus?

Use the car's remote button to open the trunk with one click. Precautions for opening the trunk: 1. Before opening the trunk, ensure there are no obstacles, ceilings, rear walls, etc., within the opening range to prevent scratches on the tailgate due to unnoticed obstacles. 2. When the trunk is fully closed, an alarm sound will be emitted. Do not start the vehicle if the closing alarm is not heard to prevent accidents caused by an improperly closed tailgate. 3. If any abnormalities occur with the trunk, it is necessary to have it maintained at an authorized service center.
1
0
Share

How to Remove Spots from Car Window Glass?

It's best to gently wipe the dust off car glass, using a slightly damp cloth rather than one that's too wet. After removing surface dust from car glass, there are usually stubborn spot stains that require targeted wiping with a cleaning solution. For grease removal, you can use a dedicated grease cleaner, and a small amount of ammonia water can be added to the water when cleaning grease. It's advisable to use a specialized glass cleaner for washing car glass to ensure better cleaning, avoiding strong corrosive cleaning agents.
9
3
Share

How to Determine the Timing of Steering When Backing into a Parking Space

After fully turning the steering wheel when backing into the space, if you see the distance between the car body and the corner of the space is less than 30 cm (less than two fingers' width on the mirror), it indicates that the steering was initiated too early. After fully turning the steering wheel to the right, observe the right rearview mirror. If the black tire marks are not visible, it means the steering was initiated too early, and you should promptly correct the wheel alignment.
3
4
Share

How to Operate a Toyota Automatic Transmission Car?

First, walk around the vehicle to check if any of the four tires are underinflated or punctured, then insert the key and start the engine. After the vehicle has come to a stop, press the brake pedal, shift the gear to R (Reverse), release the handbrake, and slowly lift your right foot off the brake pedal to allow the car to move backward. Upon reaching your destination, park the car in the designated spot, shift the gear to P (Park), engage the handbrake, release the foot brake, turn off the ignition, and remove the key to lock the car.
1
0
Share

What Causes the Black Screen in Mercedes-Benz E300?

Reasons for the black screen in Mercedes-Benz E300 navigation system: Complete black screen without powering on: First, check if the car fuse has blown. If the fuse is burnt out, replace it. Also, inspect whether the navigation buttons are stuck, including the RSET button, as stuck buttons can also prevent the system from powering on. Black screen with normal sound: Tap the touchscreen to see if it responds. If the touch function works normally, then the issue lies with the display screen itself. If the touch function is not working, check the touch circuit. Generally, this could be due to the decoder chip or core module not functioning or being damaged.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.