What are the body dimensions of the Trumpchi GA6?

How to Adjust the Left and Right of Car Headlights?

Car headlights can be adjusted left and right by following these steps: 1. Open the car hood; 2. Locate the adjustment screws behind the headlights to adjust their left and right alignment. Types of car headlights include position lights, daytime running lights, turn signals, brake lights, fog lights, reverse lights, and license plate lights. The working principle of car headlights involves a central intelligent control chip that determines changes in external brightness via light sensors to operate the lights. Car headlights consist of a headlight assembly, onboard computer, and light sensors, characterized by low power consumption, high brightness, and long service life. Precautions for using car lights include: 1. Use low beams when driving at night; 2. Do not use high beams when a following vehicle is close to the leading vehicle in the same direction; 3. Alternate between high and low beams when passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signals at night.

12

1

Share

What Causes Brake System Failures in New Energy Vehicles?

New energy vehicle brake system failures may result from the following causes: Vacuum Pump Oil Leakage: Currently, some newly installed vacuum pumps may exhibit lubricating oil discharge from the exhaust port during operation. This is a design flaw of the vacuum pump itself and typically resolves after prolonged use. Vacuum Pump Housing Electrification: If the vacuum pump's housing is electrified, inspect whether the power cable incorrectly connects the housing to the positive terminal. Correct this wiring error immediately. Additionally, verify proper grounding of the power socket's earth wire and ensure secure connection. Master Cylinder Blockage: Symptoms include abnormally low brake pedal position that fails to rise upon further depression, accompanied by a stiff pedal feel.

20

2

Share

What is the purpose of waxing a car body?

The purpose of waxing a car body is: 1. To prevent the aging of the car's paint; 2. To maintain the brightness and freshness of the paint; 3. To protect against UV rays and acid rain; 4. To effectively fill in minor scratches on the paint surface; 5. To reduce friction static between the car body and the air, preventing dust accumulation. The steps for waxing a car body are: 1. Wash the car thoroughly with a dedicated car wash solution; 2. After rinsing, dry the car with a clean cloth to avoid water affecting the waxing effect; 3. Move the car to a shaded area, use a round sponge specifically for solid car wax to apply the wax evenly on the paint surface; 4. During application, move the sponge in circular motions to create a fish-scale effect with the wax; 5. After application, wait 5 to 10 minutes for the wax to dry completely; 6. Use a microfiber towel to remove any excess wax from the paint surface.

13

0

Share

What is the reason for the Audi A6L fan continuing to run after the engine is turned off?

Fault cause analysis: Failure of the radiator fan control unit J293. Circuit failure. Engine control unit J623 failure. Air conditioning control unit J255 failure. The following is a related introduction: 1. Appearance: The new generation Audi A6L is based on Audi's latest MLB-Evo platform. In terms of appearance, it adopts Audi's latest family-style design, with the large hexagonal grille still featuring Audi's signature large-mouth design. The headlights on both sides have also become more sharp and stylish, combined with bold straight-line elements, giving the new car a sporty feel. 2. Power: The new A6L will offer high and low power 2.0T inline four-cylinder engines and a 3.0T V6 engine to choose from. Among them, the 2.0T models are equipped with a 12V mild hybrid system. The 40TFSI model has a maximum power of 140kW (190PS) and a peak torque of 320N·m; the 45TFSI model is 165kW (224PS)/370N·m; the 55TFSI model equipped with a 3.0T V6 comes with a 48V mild hybrid system, with a maximum power of 250kW (340PS) and a peak torque of 500N·m. In terms of transmission, the new car is matched with a 7-speed dual-clutch transmission, and some 45TFSI and 55TFSI models are also equipped with the quattro four-wheel drive system.

8

3

Share

What is the purpose of adding windshield washer fluid to a car?

The functions of adding windshield washer fluid to a car include: 1. Cleaning: It has wetting and penetrating properties, which help in cleaning and removing dirt; 2. Anti-freezing: It significantly lowers the freezing point of the liquid, providing anti-freezing effects; 3. Anti-fogging: It forms a single-molecule protective layer on the glass surface, preventing the formation of fog droplets and ensuring the windshield remains clear and transparent, with a clear field of vision. The method for adding windshield washer fluid to a car is: 1. Turn on the wiper switch, and the windshield washer fluid will spray from below the front windshield; 2. Continue until the spray nozzle stops spraying, then open the windshield washer fluid filler cap and add the fluid; 3. Turn on the wiper switch again to clear out any remaining windshield washer fluid; 4. When no more fluid sprays from the nozzle, add the windshield washer fluid and securely close the filler cap when done.

5

4

Share

What is the 0-100 km/h acceleration time of the Arrizo 5 Plus?

According to official data, the Arrizo 5 Plus accelerates from 0 to 100 km/h in 12.6 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, naturally resulting in faster acceleration. The Chery Tiggo 3 has a maximum torque of 230 Nm and a 0-100 km/h acceleration time of 13.14 seconds. The Arrizo 5 Plus also has a torque of 230 Nm, with a 0-100 km/h acceleration time of 12.6 seconds. Transmission efficiency: The transmission is the medium for delivering power and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Arrizo 5 Plus is equipped with a 9-speed continuously variable transmission (CVT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Chery Tiggo 3 has a power-to-weight ratio of 169 Hp/T and a 0-100 km/h acceleration time of 13.14 seconds. The Arrizo 5 Plus has a power-to-weight ratio of 153 Hp/T, with a 0-100 km/h acceleration time of 12.6 seconds.

5

1

Share

What are the body dimensions of the Trumpchi GA6?

How to Adjust the Left and Right of Car Headlights?

What Causes Brake System Failures in New Energy Vehicles?

What is the purpose of waxing a car body?

What is the reason for the Audi A6L fan continuing to run after the engine is turned off?

What is the purpose of adding windshield washer fluid to a car?

What is the 0-100 km/h acceleration time of the Arrizo 5 Plus?

What is the difference between plug-in hybrid and pure electric?

Are All Joint Venture Cars Manufactured Domestically?

What brand of tires does the Audi A4 come with originally?

What is the ground clearance of the Toyota RAV4?