What are the body dimensions of the Toyota Avalon?

1 Answers
CarolineMarie
07/29/25 9:25pm
Toyota Avalon has a length, width, and height of 4990mm/1850mm/1450mm, which are the official data. The length of the Toyota Avalon refers to the distance between the two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between the planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the Toyota Avalon has a maximum power of 131kw and a maximum torque of 210 Nm. This engine reaches its maximum power at 5000 to 6000 rpm and its maximum torque at 1600 to 4300 rpm. It is equipped with hybrid injection technology and uses an aluminum alloy cylinder head. The country has relevant regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include the rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
Was this review help?
17
4
Share
More Forum Discussions

What Causes Abnormal Noise in the Engine Transmission?

The causes of abnormal noise in the engine transmission are: 1. Wear and damage of bearings; 2. Abnormal gear meshing clearance; 3. Gear tooth surface metal peeling, tooth breakage, or misalignment during assembly; 4. Insufficient lubrication due to inadequate lubricant; 5. Water ingress into the transmission; 6. Loose bolts in the transmission housing; 7. Excessive play between the gearshift lever and the shift fork groove in a manual transmission; 8. Long-term lack of automatic transmission fluid replacement; 9. Use of inferior automatic transmission fluid. Transmissions are divided into manual transmissions and automatic transmissions. Manual transmissions mainly consist of gears and shafts, while automatic transmissions are composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system.
8
3
Share

Is Power Steering Fluid the Same as Transmission Oil?

Transmission oil and power steering fluid are not the same. Transmission oil primarily functions to maintain the cleanliness of the gear system and provides lubrication to the transmission components, extending their lifespan. Related details are as follows: 1. Due to differences in transmission design, transmissions are categorized into manual and automatic types. Each transmission design has specific technical requirements. Even the same model of transmission configured in different vehicle models will vary in torque, weight, rotational speed, and structure. Therefore, the original manufacturer specifies a dedicated transmission oil for each. 2. Power steering automatically provides steering force when the driver turns the wheel, thereby reducing the driver's steering effort. Power steering fluid is a medium oil added to the power steering system, serving to transmit steering force and provide cushioning.
5
3
Share

What is the difference between dry and wet oil in dual-clutch transmissions?

Here are the differences between dry and wet dual-clutch transmissions: 1. Different cooling methods: Dry dual-clutch transmissions use air cooling to dissipate heat, while wet dual-clutch transmissions are immersed in oil, resulting in higher cooling efficiency. 2. Different clutches: Dry clutches use manual transmission friction plates with high mechanical transmission efficiency but complex operation and higher failure rates; Wet clutches use automatic transmission oil-immersed friction plates with lower mechanical transmission efficiency but easier operation and lower failure rates. Additional information: 1. DCT refers to dual-clutch transmissions, which belong to both manual and automatic transmissions. 2. Advantages of dual-clutch transmissions include: seamless gear shifting; reduced fuel consumption; stronger vehicle acceleration; and the ability to skip downshift in manual control mode.
16
4
Share

How to resolve the EPC warning light on the dashboard?

The solutions for the EPC warning light on the dashboard are: 1. Check if there is a malfunction in the intake system; 2. Use high-quality fuel; 3. Inspect whether the electronic throttle body is dirty and clean it if necessary; 4. Remove carbon deposits from related components; 5. Reprogram the ECU with relevant data. The reasons for the EPC warning light appearing on the dashboard include: 1. Brake lights not functioning; 2. Throttle or wiring faults; 3. Damaged brake switch; 4. Faulty clutch switch; 5. Abnormal cylinder pressure causing poor operation; 6. Intake system leaks or blockages; 7. ECU malfunction; 8. Sporadic false alarms.
7
1
Share

What is the size of the Accord wiper blades?

The size of the Accord wiper blades is 24 inches and 18 inches. The driver's side is 24 inches, and the passenger side is 18 inches. Taking the 2018 Accord as an example, it belongs to a mid-size car with body dimensions of: length 4893mm, width 1862mm, height 1449mm, a wheelbase of 2830mm, and a curb weight of 1548kg. The 2018 Accord features a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, producing a maximum horsepower of 146ps, a maximum power of 107kW, a maximum torque of 175Nm, and is paired with an electronic continuously variable transmission.
15
5
Share

How to Use the Jack Inside the Car?

Here are the steps to use the jack inside the car: 1. Open the jack, with the top being the support part and the bottom being the base; 2. Place the base downward and the support part against the car's chassis, then insert the jack into the gap between the chassis and the ground; 3. Use the wheel hub bolt wrench as a lever and simply turn it. Additional information: 1. There are two types of vehicle jacks: one is the rack jack, and the other is the screw jack. When using the jack, the following points should be noted: secure the vehicle properly; take safety warning measures; ensure the base of the jack is fixed; pay attention to the maximum load capacity of the jack; align with the chassis support points of the vehicle.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.