What are the body dimensions of the T-Roc?

1 Answers
Shirley
07/29/25 5:34pm
The T-Roc has a body length of 4318mm, width of 1819mm, and height of 1582mm, with a wheelbase of 2680mm. The T-Roc is a compact SUV under the Volkswagen brand. The four-wheel-drive version is equipped with a wet dual-clutch transmission, while other models use a dry dual-clutch transmission. In terms of power, the T-Roc is powered by a 1.4-liter turbocharged engine, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. The engine reaches its maximum power at 5000 to 6000 rpm, features direct fuel injection technology, and utilizes an aluminum alloy cylinder head and block.
Was this review help?
8
2
Share
More Forum Discussions

What Should Drivers Pay Attention to Before Exiting the Vehicle?

Before exiting the vehicle, drivers should carefully observe the situation on the left rear side and only open the door when it is confirmed that no one is passing by. Below is more relevant information: 1. Precautions for driving on icy and snowy roads: (1) Start gently with the accelerator: On icy and snowy roads, difficulty in starting the vehicle is a common issue, especially for front-wheel-drive vehicles where the front wheels are prone to slipping, which can be dangerous. Therefore, when starting on icy or snowy surfaces, the accelerator should be pressed more lightly, and forceful acceleration should be avoided. (2) Avoid sudden steering: When driving in snowy conditions, avoid making sudden turns with the steering wheel. Snowfall can lead to icy or muddy roads, significantly reducing tire traction. Sudden steering can cause the wheels to lose grip, making it impossible to complete the turn and leading to skidding. (3) Slow down and use turn signals more frequently when turning: Before entering a turn on snowy roads, reduce speed in advance and avoid braking to slow down after entering the turn. It is best to tap the brakes a few times before braking to alert the following vehicle to slow down and avoid a rear-end collision. 2. Precautions when using snow chains: If tire chains are used improperly, they can not only reduce the lifespan of the tires but also cause serious accidents. Ensure that the connections of the chains are free from knots or twists. When installing the chains on the tires, make sure that the hooks do not damage the tires. The chains should be installed in the center of the tires. If necessary, move the vehicle back and forth slightly to adjust the chains. When installing chains on only two wheels, they should be installed on the rear wheels.
18
4
Share

Must the car water pump be replaced if it leaks?

Car water pump leakage must be replaced, as the leakage is caused by damaged seals. If not replaced, the leakage can lead to engine damage. Automotive engines widely use centrifugal water pumps, whose basic structure consists of components such as the pump housing, connecting plate or pulley, pump shaft and bearings or integrated shaft bearings, pump impeller, and water seal device, making them a major component of the vehicle. The car water pump is located in the engine block, which has multiple water passages for coolant circulation. It is connected to the radiator at the front of the car via hoses, forming a large water circulation system. At the engine's water outlet, a water pump is installed, driven by the fan belt, to pump hot water out of the engine block's water passages and pump cold water in.
19
5
Share

Is It Normal to Find Black Soot on the Exhaust Pipe?

Finding black soot on the exhaust pipe is a normal phenomenon. The main component of the soot emitted from the exhaust pipe is carbon deposits, which can be cleaned using a carbon deposit cleaner. The primary reasons for black soot on the car's exhaust pipe are: 1. Spark plug failure; 2. Too low cylinder pressure in the engine; 3. Clogged air filter. The solutions for black soot on the car's exhaust pipe include: 1. Replacing the spark plug; 2. Checking the sealing of the valves and valve seats, which may require grinding or replacement with new parts; 3. Cleaning the air filter. The car's exhaust pipe is installed between the engine's exhaust manifold and the muffler, providing flexible connection for the entire exhaust system. This setup helps reduce vibration and noise, facilitates installation, and extends the lifespan of the exhaust muffler system.
10
2
Share

What are the reasons why the Haval H2 suddenly fails to start?

Haval h2 suddenly fails to start because of: 1. The gear was not returned to P gear when parking; 2. The steering wheel is in a locked state; 3. The battery is dead. The solutions are: 1. Return the gear to P gear; 2. Gently turn the key with your right hand and lightly turn the steering wheel with your left hand to unlock the steering wheel; 3. Use the ignition wire method to charge and repair. Taking the 2018 Haval H2 1.5T manual two-wheel drive fashion model National VI as an example, in terms of body size, its length, width and height are 4365mm, 1814mm, 1710mm. This car is a 5-door 5-seat small SUV, equipped with a 1.5t inline four-cylinder turbocharged engine and a 6-speed manual transmission.
11
4
Share

What is the correct sequence of operations for shutting down a manual transmission car?

The correct sequence of operations for shutting down a manual transmission car is: 1. Press the foot brake; 2. Shift to neutral; 3. Engage the handbrake; 4. Release the foot brake; 5. Shift into P gear; 6. Press the one-button start to stop the engine. The steps for starting a manual transmission car are: 1. Sit properly in the car; 2. Start the car; 3. Press the clutch; 4. Shift into first gear; 5. Slowly release the clutch; 6. Gently press the accelerator; 7. Fully release the clutch, and the car starts successfully. When starting a manual transmission car, be cautious of the vehicle jerking forward, which may cause the engine to stall. Always press the brake before shifting gears to prevent the vehicle from jerking forward or rolling backward. Release the clutch slowly. When the clutch is halfway released, the vehicle will start to shake. At this point, you can gently press the accelerator and continue to slowly release the clutch.
15
2
Share

How to Reset the Maintenance Light on the New Corolla?

To reset the maintenance light on the new Corolla, follow these steps: 1. Press the odometer reset button to switch to the trip odometer. 2. Turn off the engine switch, then press the trip odometer reset button. 3. Switch the engine switch to ON mode. 4. Hold the button until the trip odometer displays 000000, and the maintenance light will be reset. Taking the Corolla 2014 1.6L Manual GL as an example, its engine is a 1.6L inline four-cylinder with natural aspiration intake, a top speed of 193 km/h, maximum horsepower of 122 PS, and maximum torque of 154 Nm. The dimensions of this car are 4630 mm in length, 1775 mm in width, and 1480 mm in height, with a wheelbase of 2700 mm. The body type is a 4-door, 5-seater sedan, and the transmission is a 5-speed manual.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.