What are the body dimensions of the Roewe Rx5?

2 Answers
DelAnastasia
07/24/25 7:55am
Roewe Rx5 body dimensions: length, width, and height are 4556 mm, 1855 mm, and 1719 mm respectively, with a wheelbase of 2700 mm. The Roewe RX5 is a compact SUV launched by Roewe. In terms of suspension, the front suspension of this car adopts a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension, providing excellent overall comfort. The design of the Roewe Rx5 is very youthful, featuring the family-style Rhythm design language. The front face of the car includes a large-area grille, decorated with chrome trim. From the side, the car adopts a three-dimensional waistline design that extends from the front fender to the rear, visually elongating the body. The tail lights are connected by a continuous chrome trim, and the dual exhaust design enhances the sporty character.
Was this review help?
3
4
Share
McCali
08/11/25 3:39am
As an average car owner, my Roewe RX5 has a body size of approximately 4550mm in length, 1855mm in width, 1719mm in height, and a wheelbase of 2700mm. This size makes it quite handy for city driving. Parking isn't too difficult either, thanks to its moderate length, which makes finding a parking spot relatively easy. The interior space is particularly practical—on weekends when I take my family out, the spacious back seat can comfortably accommodate two large suitcases plus backpacks without feeling cramped. I remember our last family hiking trip; the kids had plenty of legroom in the back, and the trunk easily fit a tent and picnic basket. The overall dimensions are well-balanced, making it agile for daily commutes and comfortable for long trips. Its small turning radius also makes garage access convenient. Fuel consumption is decent—it doesn't guzzle gas like larger vehicles. After driving it for a while, I've found that this size strikes a perfect balance between practicality and handling, making it especially suitable for family life.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

What brand does the XPeng P7 belong to?

XPeng Motors is a leading Chinese intelligent electric vehicle designer and manufacturer headquartered in Guangzhou. Its product lineup includes the XPeng P7 long-range intelligent sports sedan and the XPeng G3 long-range intelligent SUV, dedicated to creating intelligent electric vehicles that better understand Chinese consumers. Detailed specifications are as follows: 1. Range: The XPeng P7 is positioned as a mid-size pure electric sports sedan, with pre-sale prices announced at the 2019 Guangzhou Auto Show. It offers three variants: Rear-Wheel Drive Long Range, Rear-Wheel Drive Super Long Range, and All-Wheel Drive High Performance. The Super Long Range version features a motor with maximum power of 196kW (267Ps) and a range exceeding 650km, while the High Performance version boasts system maximum power of 316kW (430Ps) with a range over 550km. 2. Design: The XPeng P7 incorporates streamlined coupe styling with low-drag features including a fastback ducktail spoiler, semi-hidden wipers, low-drag side mirrors, AGS active grille system, and an almost completely flat underbody. These aerodynamic optimizations significantly reduce drag coefficient and enhance range. The vehicle is equipped with a next-generation square battery pack featuring 80.87kWh rated cell energy and 170Wh/kg energy density.
7
5
Share

How to Check if the Lynk & Co 01 Antifreeze is Low?

Methods to determine if the Lynk & Co 01 antifreeze is low: Observe the antifreeze warning light on the dashboard. If it lights up, it is likely due to low antifreeze, though it could also be caused by excessively high engine temperature. Check the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add antifreeze promptly. Inspect the fluid level markings on the antifreeze overflow tank. The antifreeze level should normally be between the maximum and minimum marks. If it is below the minimum mark, it indicates low antifreeze. How to choose antifreeze: The key indicators of antifreeze are its freezing point and boiling point. Available antifreeze specifications include freezing points of -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose an antifreeze with a freezing point at least 10°C lower than the lowest temperature in your region.
8
5
Share

What does it mean when the ABS warning light is on in an Accord?

When the ABS warning light is displayed in a car, it indicates a malfunction in the vehicle's Anti-lock Braking System. If the wheels lock up during emergency braking, the vehicle may lose control and skid, making it difficult for the driver to decelerate or adjust the vehicle's trajectory, posing significant safety risks. There are several scenarios where the ABS light may illuminate, each with different causes and solutions, as detailed below: Scenario 1: ABS warning light remains constantly on (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Inspect the wiring connections and reconnect any loose parts. Scenario 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple electrical components are in use, the battery voltage may drop below 10.5V. As the engine speed increases and voltage rises, the ABS warning light turns off. This can also occur if the ABS system's power supply voltage is too low, such as due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). Scenario 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body, faulty wiring connections in the ABS hydraulic valve body, or a malfunctioning ABS control unit. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connectors and replace the ABS or ABS/ASR control unit if needed. Scenario 4: ABS warning light illuminates during high-speed driving. Cause: The ABS control unit detects a significant discrepancy between the rear and front wheel speed signals during high-speed driving. This may also occur if the tire or wheel rim specifications are incorrect. Solution: Refer to the vehicle's tire and wheel rim specifications, typically found on the label near the fuel tank cap. Scenario 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage down fully, then release the brake pedal to complete the self-setting process. Replace the brake light switch if necessary.
9
2
Share

What is the reason why a single-cylinder diesel engine can be cranked without decompression?

Pressurization valve may be malfunctioning. Here is an introduction to the pressurization valve: 1. The pressure reducing valve regulates: reducing the inlet pressure to a required outlet pressure, and relying on the energy of the medium itself to automatically maintain a stable outlet pressure. 2. From a fluid dynamics perspective: the pressure reducing valve is a throttling element with variable local resistance, meaning it changes the throttling area to alter flow velocity and fluid kinetic energy, resulting in different pressure losses to achieve pressure reduction. 3. System regulation: balances the fluctuation of downstream pressure with spring force, maintaining downstream pressure within a certain error range.
8
4
Share

Why is it required to complete the reverse parking test in one attempt?

In the reverse parking test, it is explicitly required that the trainee must complete the maneuver in one attempt to assess their proficiency in vehicle operation. Here is more information: 1. Introduction: Reverse parking became a mandatory test item for obtaining a small vehicle driver's license after 2013. It evaluates the driver's ability to maneuver the vehicle in a confined space. Reverse parking is a key assessment point in the driver's test, which involves correctly reversing the vehicle into the garage from both sides while in motion. 2. Test area layout: The testing zone measures 16 meters in length and 6.83 meters in width, while the garage is 5.25 meters long and 2.31 meters wide.
3
4
Share

What does a total loss vehicle mean?

Total loss vehicle refers to an insured vehicle that is completely destroyed or severely damaged to the extent that it loses its repair value. In such cases, the insurance company will determine the vehicle as a total loss. Additional information: 1. Total loss vehicles can be traded: With the consent of the insurance company, total loss vehicles can be traded. The disposal method for total loss vehicles can be auction, and most total loss vehicles end up in the used car market. 2. Precautions: Total loss vehicles still have value, so factories can purchase and repair them on their own. When actual total loss is unavoidable, or when the residual value of the damaged goods plus the costs of rescue, sorting, repair, and continued transportation to the destination exceed the value of the goods upon arrival at the destination, it is considered a total loss.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.