···
Log in / Register

What are the body dimensions of the Roewe RX3?

4 Answers
VonJosephine
07/29/25 9:01pm

The length, width, and height of the Roewe RX3 are 4408 mm, 1804 mm, and 1651 mm respectively, with a wheelbase of 2625 mm. Below is more information about the Roewe RX3: 1. The Roewe RX3 is a compact SUV equipped with two engines: a 1.3-liter turbocharged engine and a 1.6-liter naturally aspirated engine. The 1.6-liter naturally aspirated engine, coded as 16S4C, delivers a maximum power of 92 kW and a maximum torque of 158 Nm, with peak power achieved at 6000 rpm and peak torque at 4500 rpm. This engine features multi-point fuel injection technology and uses an aluminum cylinder head and cast iron cylinder block. It is paired with either a 5-speed manual transmission or a CVT. 2. The 1.3-liter turbocharged engine produces a maximum power of 120 kW and a maximum torque of 230 Nm, with peak power at 5200 rpm and peak torque between 1800 and 4400 rpm. This engine also employs multi-point fuel injection and features an aluminum cylinder head and block. It is matched with a 6-speed automatic transmission. 3. The front suspension of this vehicle uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension. Compact SUVs typically use torsion beam rear suspensions to save space and reduce production costs, while also expanding rear passenger and trunk space.

Was this review help?
6
1
Share
DiPreston
08/15/25 6:58pm

I usually pay attention to various car parameters, and the body dimensions of the Roewe RX3 impressed me deeply. It measures 4437mm in length, 1804mm in width, and 1608mm in height, with a wheelbase of 2625mm. These dimensions are quite standard for a compact SUV, making urban driving super flexible and parking effortless. The moderate width makes it less prone to scratches on crowded streets, while the height of 1608mm ensures spacious and comfortable rear seating with ample legroom and headroom. The 2625mm wheelbase enhances high-speed stability. During my test drive, I found it easy to maneuver in city turns, without the bulkiness of larger SUVs. The overall dimensions strike a balance between practicality and driving pleasure. If you prefer daily commuting, these dimensions are definitely appealing, also helping to save fuel costs. It's easier to handle compared to its counterpart, the Honda CR-V. Parking and cargo loading are hassle-free, with the trunk size being just right.

Was this review help?
20
0
Share
Expand All
MacGeorge
10/16/25 7:58am

As a frequent driver, I find the Roewe RX3's dimensions very down-to-earth, with a length of 4437mm, width of 1804mm, and height of 1608mm—not too large but sufficient. It's convenient for daily city driving, whether dropping off kids or shopping, as its compact size makes parking easy. The 1608mm height allows the trunk to fit a stroller and large bags, while the 2625mm wheelbase ensures a stable and comfortable ride. The body width is just right, making it easy to navigate narrow urban roads without feeling bulky. The smaller size has practical benefits, such as a tighter turning radius and quicker response, unlike larger vehicles that struggle with parking. The rear seats offer ample space, ensuring comfort for family members and easy entry and exit. Overall, the dimensions are designed for practicality and efficiency, and over time, the fuel consumption remains low.

Was this review help?
18
5
Share
Expand All
Jay
11/29/25 8:45am

The Roewe RX3 has straightforward body dimensions: 4437mm in length, 1804mm in width, 1608mm in height, and a wheelbase of 2625mm. The 1608mm height ensures a spacious interior with ample legroom in the rear seats. Its compact size makes it ideal for city driving, with easy and hassle-free parking. The driving experience is stable yet nimble, thanks to its well-controlled dimensions that make it easy to handle. I recommend focusing on practical usage rather than just the numbers.

Was this review help?
14
3
Share
Expand All
More Forum Discussions

What does NOA mean in autonomous driving?

It refers to a function that automatically enters or exits highway ramps during navigation. Below is relevant information about NOA: 1. NOA: It is a feature in Tesla's autonomous driving upgrade package that enables the vehicle to automatically enter and exit highway ramps or interchange forks, and overtake slow-moving vehicles. 2. Compared to traditional adaptive cruise functions: The characteristic of the NOA function is that it can independently determine the timing of entering and exiting highways and the timing of overtaking, and achieve automatic lane changing and overtaking without human intervention. 3. The method of using this function is relatively simple: When the vehicle system sets a navigation point and starts navigation, quickly pull the cruise control lever forward twice to activate the automatic assisted navigation driving function. During use, a single blue line represents the forward travel route, making it easy for the vehicle to stay within the driving lane. The gray lines that appear indicate upcoming lane changes in the travel route, or suggest lanes that should be changed for smoother driving.
17
5
Share

Can You Still Drive When the Brake System Warning Light Is On?

It is recommended not to drive. Below are the reasons related to the brake warning light: 1. Check the brake fluid level: The brake fluid reservoir is usually located on the right side of the engine compartment, marked with MAX (maximum) and MIN (minimum) indicators. If the level is below MIN, it is necessary to visit a repair shop as soon as possible for inspection and refill. 2. Brake fluid leakage: Oil leakage from components such as the brake caliper or oil pipes can also cause the brake fluid level in the reservoir to drop too low, triggering the warning. In such cases, immediately inspect the source of the leakage and carry out repairs or replacements. Additionally, if the brake pads are contaminated with oil, they must be cleaned thoroughly or replaced directly. 3. Brake pad warning: When the brake pads wear down to their limit, the brake system warning will be triggered. The brake pad warning system involves inserting a warning wire into the brake pad. If the brake pad wears excessively, it will rub against the sensor wire, causing it to break or come into contact with the brake disc, altering the resistance. This change in resistance leads to a variation in current, ultimately triggering the warning.
16
3
Share

How to Replace the Seat Belt in the Envision?

First, locate the sensor wire of the Envision's seat belt buckle and remove it. Then, take off the seat cushion, remove the airbag, detach the seat belt buckle, and install the new buckle onto the seat. Next, install the weight sensor on the car seat, and finally, restore the seat cushion to its original position, arrange the wiring properly, and check if the newly installed seat belt is securely locked. Below are some precautions for using seat belts: 1. Ensure correct positioning: fasten the lap belt section across the pelvis and the shoulder belt diagonally across the chest, not on other parts. One seat belt is for one person only. 2. Do not twist the seat belt when using it. Wearing thick clothing may cause incorrect positioning. Avoid letting the seat belt rub against sharp edges. 3. Do not recline the seat back too far, as this may prevent the seat belt from extending or retracting properly. 4. Avoid placing the seat belt over hard or fragile items, such as glasses, pens, or keys inside clothing. 5. If the seat belt has been subjected to a severe impact, replace the entire assembly even if it appears undamaged. Regularly inspect the seat belt for wear and replace any damaged parts.
14
0
Share

What does it mean to stop beyond the stop line at a signalized intersection?

Stopping beyond the line refers to the act of a vehicle failing to stop as required when waiting at a traffic signal intersection, parking the vehicle in an area beyond the stop line. Stopping beyond the line will result in a fine of 100 yuan and 2 demerit points. Below is additional information: 1. Criteria for stopping beyond the line: Based on the stop line, when a vehicle encounters a red light and the entire vehicle crosses the stop line, remaining stationary for 5 seconds or more, it is considered "stopping beyond the line." The entire vehicle crossing means both the front and rear wheels have passed the stop line. 2. Solid white line: When painted on a road section, it is used to separate motor vehicles and non-motor vehicles traveling in the same direction or to indicate the edge of the roadway; when painted at an intersection, it can serve as a guide lane line or a stop line.
18
1
Share

Can CarLife be installed afterwards?

CarLife can be installed afterwards. Here is a detailed introduction about it: 1. Introduction 1: The car networking product CarLife launched by Baidu this time is one of the most compatible car networking standards in the world, and it is also the first cross-platform car networking solution in China. 2. Introduction 2: On the car machine side, whether it is Linux, QNX or Android, CarLife can be perfectly adapted. 3. Introduction 3: With Baidu Maps as the core, CarLife will be able to provide users with the most accurate route planning, location query, and journey estimation in the industry, helping users find destinations and avoid congestion, and can also update map data anytime and anywhere.
10
2
Share

How Many Years Later Does a Private Car Require Biannual Inspections?

Private cars require biannual inspections after 15 years. Here is additional information: 1. Inspection intervals: Small and micro non-commercial passenger vehicles (i.e., private cars) must be inspected every 2 years within the first 6 years; annually after exceeding 6 years; and twice a year after exceeding 15 years, with emissions testing conducted during the annual inspection. For new vehicles, the valid inspection date is already noted for 2 years later, corresponding to the month of registration. 2. Required materials for vehicle inspection: A valid vehicle license with both original and duplicate copies; a third-party liability insurance policy valid for 1 year and within its validity period. If the vehicle is purchased via installment and the original insurance policy is unavailable, provide a copy of the insurance policy (stamped by the insurance company), an insurance card, and an explanation; proof of identity and a copy of the identity document.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.