What are the body dimensions of the Refine M4?

How to Check Tire Pressure on Buick Excelle?

Here are the methods to check tire pressure on Buick Excelle: 1. Press the MENU button to switch to the vehicle information menu. 2. If the overspeed alarm is displayed, rotate the knob at the top of the left lever again to switch to the tire pressure monitoring information, where you can see the tire pressure of all four tires. Below is additional information about Buick Excelle: 1. The Buick Excelle is a compact car with a length, width, and height of 4609mm, 1798mm, and 1464mm respectively, and a wheelbase of 2640mm. 2. It is equipped with a 1.5L naturally aspirated engine and a 1.3T turbocharged engine, with maximum power outputs of 83kw and 120kw respectively. 3. It is paired with a 6-speed automatic transmission.

3

4

Share

What does 'clock' mean in a car? Chinese translation

The 'clock' in a car literally means a timepiece. The purpose of this button in vehicles is to allow drivers to quickly switch the display to the clock interface while driving, enabling them to check and set the time. Some smart cars may also display the multimedia system time and the vehicle's CAN network time. The steps to adjust the time are as follows: 1. First, insert the key into the ignition and turn it to power on the vehicle. There are two buttons located at the bottom left and right corners of the dashboard - these two buttons alone can quickly adjust the time. 2. First, understand the function of these two buttons: the left button is the selection key (press once to adjust hours), and the right button is the adjustment key (each press increases the value by one unit). After setting the hours, proceed to adjust the minutes. 3. Press the left button twice consecutively to switch to minute adjustment mode. Then use the right button to increase or decrease minutes until reaching the desired time. Note: Time adjustments must be performed quickly. If the interval between operations is too long, you'll need to restart the adjustment process. Additionally, time cannot be adjusted while the vehicle is in motion.

12

5

Share

How often should the Malibu spark plugs be replaced?

Malibu spark plugs should be replaced every 60,000 kilometers. Methods to determine if spark plugs are damaged: Remove the spark plugs and observe them. The condition of the spark plugs can be judged based on their appearance and color. Normal spark plugs have an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plugs are covered in oil or deposits but are not damaged, they can continue to be used after cleaning off the oil and deposits. If the spark plugs are severely damaged, showing signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plugs with new ones. Additionally, if the spark plugs appear black as if smoked, it indicates that the wrong heat range was selected or that the air-fuel mixture is too rich, or that engine oil is leaking into the combustion chamber.

11

3

Share

How to Remove Glue from Car Film?

You can use banana oil, vinegar, toothpaste, essential balm, alcohol, etc., to remove glue from car film. Among these, alcohol is the most effective. When alcohol is brushed onto the adhesive on the glass, you will immediately see the adhesive slowly soften and dissolve. With a gentle pull by hand, the adhesive comes off cleanly from the glass and car body. The steps to remove glue with essential balm are as follows: 1. Prepare a bottle of essential balm, a piece of tissue paper, a cloth soaked in dish soap, and a spray bottle filled with clean water, placing them near the stain to be treated for easy access. 2. Pour the essential balm onto the adhesive stain, covering the entire stained area. 3. Use the tissue paper to scrub back and forth over the stain covered with essential balm. You will see the stain being removed quickly. 4. Fold the tissue paper to use a clean side and continue scrubbing to reinforce the cleaning. If the essential balm dries and some stain remains, pour a little more essential balm onto it. 5. After the stain is cleaned, use the cloth soaked in dish soap to scrub the original stain area back and forth several times.

13

5

Share

What are the items for the first maintenance of JAC Refine S3?

JAC Refine S3 first maintenance items include: 1. Replace engine oil and oil filter; 2. Check if the coolant level meets the specified requirements; 3. Check the brake and clutch fluid levels; 4. Check if the power steering fluid level complies with the regulations; 5. Check for any oil leakage at the interfaces of various oil pipes in the system. Below is some relevant information: 1. Refine S3 undergoes a major maintenance at 60,000 kilometers, which typically includes replacing all auxiliary fluids (antifreeze, brake fluid, power steering fluid, transmission fluid), replacing spark plugs, and cleaning the engine from the intake to the exhaust system (throttle body, fuel injectors, fuel system, combustion chamber, intake valves, intake manifold, catalytic converter, lubrication system), in addition to changing the engine oil and filter. 2. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing. Car maintenance mainly covers the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of car maintenance is to keep the vehicle clean and in good technical condition, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. A car is a complex piece of machinery, and during operation, mechanical parts inevitably wear out, compounded by external human and environmental factors, leading to vehicle wear and tear.

6

3

Share

Are there regulations for car license plate screws?

There are regulations for car license plate screws. The fixing screws for car license plates are required to use M6 specification bolts. According to the "Motor Vehicle Safety Technical Inspection Items and Methods," during the registration inspection, the license plate and its installation must also meet the following requirements: 1. The vehicle should be equipped with front and rear license plate boards (frames) that meet the installation requirements for license plates, but motorcycles only need to have a rear license plate board (frame) that meets the installation requirements. The front license plate board (frame) should be located in the middle or right side of the front (according to the direction of the vehicle's movement), and the rear license plate board (frame) should be located in the middle or left side of the rear. 2. The license plate should be directly and securely installed on the vehicle using M6 specification bolts. 3. For vehicles manufactured on or after March 1, 2016, each license plate board (frame) [except for the front license plate board (frame) of three-wheeled vehicles and the rear license plate board (frame) of motorcycles] should have four license plate installation holes to ensure that the license plate can be directly and securely installed on the vehicle using M6 specification bolts.

8

0

Share

What are the body dimensions of the Refine M4?

How to Check Tire Pressure on Buick Excelle?

What does 'clock' mean in a car? Chinese translation

How often should the Malibu spark plugs be replaced?

How to Remove Glue from Car Film?

What are the items for the first maintenance of JAC Refine S3?

Are there regulations for car license plate screws?

What engine is used in the 2015 Nissan Qashqai?

Where is the engine number of the Prado located?

What does the wrench symbol on Volkswagen dashboard mean?

What is the Difference Between Public and Private Registration for Motorcycles in Beijing?