What are the body dimensions of the RAV4?

1 Answers
Truman
07/29/25 12:48pm
Toyota RAV4's body dimensions are 4600mm, 1855mm, and 1680mm, with a wheelbase of 2690mm. Below is the relevant introduction of the RAV4: 1. In terms of power, the Toyota RAV4 is equipped with a 2.0L naturally aspirated engine, with a maximum power output of 131.0kW, maximum horsepower of 178PS, and maximum torque of 221.0N·m. 2. In terms of appearance, the Toyota RAV4's front fascia has a more off-road style, featuring a wide trapezoidal grille with solid surrounding lines and a highly recognizable hollowed-out mesh design. 3. For the interior, the Toyota RAV4's cabin is quite solid, with a well-layered dashboard, a floating central control screen, and a more refined three-spoke multifunction steering wheel.
Was this review help?
10
5
Share
More Forum Discussions

Does a newly replaced battery need to be charged?

Generally, new batteries come with some charge from the factory but not fully charged, so charging is recommended. However, it can also be used directly without charging. If the new battery has been sitting for a while, it will naturally discharge over time, even if unused, and the charge may be insufficient, requiring charging. Here are some precautions for battery usage: 1. Lead-acid batteries are highly affected by temperature. For every 1°C drop in ambient temperature, the battery capacity decreases by 0.8%. At -10°C, the battery capacity is only 72% of its normal value, and at -20°C, it drops to 64%. Conversely, higher temperatures increase capacity. Therefore, temperature should be considered, though extreme temperature changes are generally not a concern. 2. Over-discharging, or deep discharging, significantly reduces battery lifespan. To avoid frequent replacements, monitor battery consumption—avoid both over-discharging and overcharging. 3. Fast charging at typical charging stations is very quick, taking about 40 minutes to fully charge, so be mindful of charging duration.
18
2
Share

Is it necessary to drive the car for vehicle transfer?

Vehicle transfer requires the car to be present on-site. Below is the process for vehicle transfer: 1. At the hall window, obtain the used motor vehicle sales contract and fill it out. This contract is in triplicate, with one copy each for the buyer, the seller, and the industrial and commercial department. 2. Drive the vehicle directly to the transfer inspection area for inspection, photography, tracing, and license plate removal. Fill out the inspection record form, and after all procedures are completed, drive the car back to the parking lot, then proceed to the transfer hall to complete the formalities. 3. After returning to the transfer hall, take a number, queue up, and wait for your number to be called. The staff will confirm that the vehicle has no violations before starting the transfer process, and the transfer fee will need to be paid. 4. After payment, proceed to the transfer acceptance window to complete the relevant procedures. Before processing, you need to fill out the Motor Vehicle Registration, Transfer, and Cancellation Form and the Motor Vehicle Import Registration Form. 5. After completing the transfer acceptance, take the receipt to the payment window to pay the transfer fee. Then, you can select a new license plate number and receive the new license plate, vehicle license, and registration certificate, marking the completion of the transfer.
5
0
Share

What engine is used in the BAIC Senova D50?

The Senova D50 is equipped with two types of engines: a 1.5-liter turbocharged engine and a 1.5-liter naturally aspirated engine. Additional information: 1. The 1.5-liter naturally aspirated engine delivers 116 horsepower and a maximum torque of 148 Nm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission. 2. The 1.5-liter turbocharged engine produces 150 horsepower and a maximum torque of 210 Nm. This engine also features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is matched with either a 6-speed manual transmission or a CVT transmission. 3. The Senova D50's front suspension employs a MacPherson independent suspension, while the rear suspension uses an H-type torsion beam non-independent suspension. The torsion beam suspension has a compact size, occupies less space, and is cost-effective. Using this type of suspension helps to expand the rear seating space and trunk capacity.
10
0
Share

Can a successfully scheduled Subject 1 exam be canceled?

Subject 1 exam can be canceled after successful scheduling, but it must be canceled at least one day in advance. Cancellation is not possible on the same day. If you are unable to attend the exam, an absence will be treated as a failure. Therefore, students should manage their time well to avoid missing the exam, otherwise, they will only waste money in vain. It's important to note that a retake of Subject 1 requires payment of a retake fee. Methods to cancel a scheduled Subject 1 exam: Depending on the status of the appointment, the cancellation method may vary. If scheduled online and the appointment is not yet confirmed, you can enter the scheduling interface online to cancel the exam appointment. Notes on canceling an appointment: If the appointment has been successfully scheduled and you have received an exam notification SMS, you need to bring your ID card and a written application to the local DMV's service window to cancel. At this point, the exam cannot be canceled online. Although there is no limit to the number of retakes for Subject 1, the ranking for rescheduling after cancellation will drop. If there are many candidates scheduling exams locally, the chance of successful scheduling next time will be lower.
9
1
Share

How to Heat the Rearview Mirror of the Mazda3 Axela?

The method to heat the rearview mirror of the Mazda3 Axela: The rearview mirror heating switch is located on the far right of the first row of buttons on the air conditioning panel. Simply turn it on. During rainy or snowy weather, after turning on the rearview mirror heating switch, the electric heating element will quickly heat up to a fixed temperature within a few minutes, typically between 35 to 60 degrees Celsius. At the same time, water droplets on the mirror surface will evaporate as the temperature rises, becoming smaller, and fog will gradually disappear, achieving the effect of heating the mirror, defogging, and defrosting. The Mazda3 Axela is a compact car produced by Changan Mazda. Taking the 2021 Mazda3 Axela as an example, in terms of power, the 1.5-liter engine of the 2021 Mazda3 Axela has a maximum power of 86kW and a peak torque of 148 Nm; the 2.0-liter engine has a maximum power of 116kW and a peak torque of 202 Nm, paired with a 6-speed manual or 6-speed automatic transmission.
6
5
Share

Is it advisable to purchase a joint-venture car that has been in stock for over half a year?

Whether it's a domestic independent brand or a joint-venture car, if it has been in stock for more than six months, it is considered a stock vehicle. Unless there is a particularly large discount and it does not affect the new car registration, it is not recommended to purchase. Reasons for joint-venture cars being in stock: Joint-venture cars are considered stock vehicles after six months because their manufacturers are located domestically, with production and manufacturing also taking place within the country. Additionally, there are branch factories in various cities, allowing for flexible scheduling. Therefore, joint-venture cars generally do not stay in stock for more than six months. If you find a new car that has been in stock for over six months, it is a stock vehicle, and you might want to consider other options. Introduction to joint-venture cars: As the name suggests, these are projects jointly established by Chinese and foreign investors. The Chinese side contributes by providing land and factory usage rights, as well as capital, while the foreign investors contribute the brand, technology, capital, talent, etc. Joint-venture cars are the products of such collaborations under the aforementioned circumstances.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.