What are the body dimensions of the Range Rover Evoque?

1 Answers
VanSavannah
07/29/25 5:37pm
The length, width, and height of the Range Rover Evoque are 4371 mm, 1904 mm, and 1649 mm respectively. Here is some information about the Range Rover Evoque: Model of the Range Rover Evoque: The Range Rover Evoque is the most compact SUV model in the Land Rover brand. Configuration of the Range Rover Evoque: It is equipped with a 2.0-liter turbocharged engine, a 9-speed automatic transmission, and an all-wheel-drive system. The front suspension uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension. Advantages of the Range Rover Evoque: The Range Rover Evoque is classified as a city SUV, but its off-road capability is also quite impressive. Some models under the Land Rover brand are equipped with the Terrain Response system, which enhances the vehicle's off-road performance and ability to escape difficult terrain.
Was this review help?
7
1
Share
More Forum Discussions

How to Remove the Front Wheel of a Benelli TNT 600?

Place wooden blocks under the engine to lift the front wheel off the ground, then remove the flexible axle line. Remove the front axle nut, take off the front axle and front wheel. For reassembly, follow the reverse order of the removal steps to reinstall the front wheel.
5
0
Share

How to Add Water to the Huanglong 600 Radiator?

There is no need to unscrew the radiator cap. Check for leaks at the joints and ensure the relevant parts are cleaned. Simply pour water directly into this reservoir. When the radiator water level drops, coolant will be drawn into the radiator through the tube.
13
4
Share

How to Shift with an H-Pattern Gearbox?

First, press the clutch pedal all the way down with your foot, then grip the gear lever with your right hand and forcefully push it downward and then to the right to return to neutral. Third gear is located above the neutral position. After pressing the clutch pedal all the way down with your left foot, simply push the gear lever downward.
20
3
Share

How to Remove the Seat of Benelli TNT 600?

First, remove the fixing bolts. For the split type, loosen the threaded sleeve with a hook wrench, then remove the gland bolts on the engine body and pull out the exhaust pipe. For the integrated exhaust pipe, it is mostly connected by threaded sleeves. Simply loosen the threaded sleeve with a hook wrench and pull out the pipe head.
18
1
Share

How to Adjust the Idle Speed of a Carburetor?

First, tighten the idle adjustment bolt, then loosen it by 1.5~2.0 turns. Slowly loosen the throttle bolt to reduce the engine speed to a very low level, almost stalling. Then, turn the idle adjustment bolt to increase the engine speed to its highest. Accelerate and release the throttle to check if the engine stalls. If it doesn't stall, it means the idle speed has been properly adjusted.
14
0
Share

How to Learn to Ride a Motorcycle Without Prior Experience?

To get familiar with the motorcycle, first sit on it to adjust and check the brakes, clutch, transmission, and other essential components. Learn how to kick-start the motorcycle. Once the motorcycle is started, gently rev the throttle to prevent stalling. When starting to learn, it's best to begin in first gear. After shifting, apply the throttle and release the clutch to complete the motorcycle's take-off.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.