···
Log in / Register

What are the body dimensions of the Porsche 718?

3 Answers
OBella
07/29/25 11:38pm
The length, width, and height of the Porsche 718 are 4379mm, 1801mm, and 1276mm respectively, which are official data. The length of the Porsche 718 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The Porsche 718 uses two types of engines: a 2.0-liter turbocharged engine and a 2.5-liter turbocharged engine. The 2.0-liter turbocharged engine has a maximum torque of 300 horsepower and 380 Nm; the maximum torque speed of this engine is between 2050 and 4500 rpm, and the maximum power speed is 6500 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. The 2.5-liter turbocharged engine in the Porsche 718 has a maximum torque of 366 horsepower and 430 Nm. The maximum torque speed of this engine is between 1900 and 5000 rpm, and the maximum power speed is 6500 rpm. This engine is also equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. There are relevant national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data is to ensure sufficient space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5 meters to comply with the usage requirements of public roads.
Was this review help?
1
3
Share
DeBrady
08/16/25 2:42am
I've always thought the Porsche 718's body dimensions are perfect for sports car enthusiasts. The car is approximately 4.38 meters long, just over 1.8 meters wide, and under 1.3 meters tall, giving it a low-slung and sporty appearance. With a wheelbase of around 2.48 meters and short front overhangs, it's incredibly agile for city driving and easy to park. That compact feel keeps the center of gravity stable, with almost no body roll when cornering, making it a blast on mountain roads. I've also noticed the proportions are just right—though the trunk is small (only fitting a small bag), the two-seater layout is ideal, making it convenient for daily commutes or joyrides. Overall, these dimensions inspire confidence behind the wheel, and combined with Porsche's design, it's both stunning and practical.
Was this review help?
4
1
Share
Expand All
Marty
10/19/25 3:13am
As someone who has actually driven the 718, I find its size quite appealing. It's less than 4.4 meters in length, a bit over 1.8 meters in width, and around 1.3 meters in height, making it easy to weave through city traffic. Narrow garages aren't a problem, and parking is straightforward, though the low body means you need to be careful not to bump your head when getting in and out. With a wheelbase of 2.48 meters and rear-wheel-drive layout, the handling is precise, and it's rock-solid at high speeds. The small size means the trunk only fits small luggage, but the two-seater feels spacious inside, making long drives comfortable. I love this size—unlike bulky cars, it handles all road conditions effortlessly.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

What is the license type for agricultural vehicles?

Agricultural vehicles generally require a C3 driver's license. Below is additional information: 1. The new version of motor vehicle driver's license categorizes permitted vehicle types as follows: A1 (large buses), A2 (towing vehicles), A3 (city buses), B1 (medium buses), B2 (large trucks), C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars). 2. C3 driver's license: Low-speed trucks C3: Low-speed trucks, originally four-wheel agricultural transport vehicles and light trucks, with a vehicle length less than 6m and a total mass less than 4500kg.
2
0
Share

Reasons for Abnormal Noises When Passing Over Speed Bumps

When passing over speed bumps, the repeated abnormal noises are often due to the friction sound from the stabilizer bar bushings. These bushings tightly wrap around the metal rod, and when going over speed bumps, the rotation of the metal rod against the bushings produces the noise. Generally, this sound cannot be heard from outside the vehicle. Additionally, if the installed engine guard is deformed or the screws are loose, it can also cause abnormal noises while driving. Furthermore, unauthorized modifications to wiring or the installation of electrical devices in the engine compartment that are not securely fixed can lead to such noises. Below is some relevant knowledge about shock absorber inspection: Check the shock absorbers for any deformation or oil leakage. The shock absorber top mount has three screws, which should be tightened with a wrench. The issue might also be caused by dry friction due to insufficient lubrication of the upper and lower shock absorber bushings. These can be removed and lubricated with grease.
9
2
Share

What is the function of the canister purge solenoid valve in a car?

The canister purge solenoid valve in a car mainly serves the following purposes: 1. The canister purge solenoid valve is a device installed in cars or motorcycles to reduce air pollution caused by fuel vapor emissions while simultaneously improving fuel efficiency. 2. When the engine is turned off, the vehicle's activated carbon canister begins to absorb fuel vapors evaporating from the fuel tank and securely locks them within the micropores of the activated carbon in the canister, preventing the fuel vapors from being released into the atmosphere. 3. When the engine is started, the canister purge solenoid valve opens, releasing the adsorbed fuel vapors into the intake manifold to be burned in the engine.
1
4
Share

What is a Naturally Aspirated Engine?

Naturally aspirated engine refers to the air intake method of an engine. Naturally aspirated means the engine does not have any forced induction equipment. It relies entirely on the vacuum created by piston movement within the engine to draw in air and the combustible mixture. Below are relevant introductions: 1. Naturally Aspirated: Naturally aspirated (English: Normally-Aspirated) is a type of automobile air intake, which is a form where atmospheric pressure forces air into the combustion chamber without any supercharger. Most ordinary cars use naturally aspirated engines, and later, to increase engine power and efficiency, forced induction was introduced. 2. Advantages: Naturally aspirated engines have lower combustion efficiency, but their output is more linear. Naturally aspirated engines offer better smoothness in power delivery and more direct response compared to forced induction engines.
8
5
Share

What are the function keys of the 2011 old model GL8?

11-year-old GL8 multi-function buttons have the following related introductions: 1. Steering wheel function keys: The left side is the cruise control, voice control and telephone function buttons, the right side is the volume control, track switching and multi-function instrument panel control buttons, the back of the steering wheel is the light lever, wiper lever, and the top is the shift paddle. 2. Central control function keys: multi-function joystick, steering wheel shift buttons, instrument panel combination instrument, driver information center (DIC) control button, hazard warning flasher switch, front fog light switch, rear fog light switch. 3. Other function keys: audio system buttons, exterior light control button, interior light control button, instrument panel brightness control button, hood release device, parking brake.
18
4
Share

How often should the transmission fluid in a Cullinan be changed?

Rolls-Royce Cullinan's transmission fluid generally needs to be replaced every three years or 60,000 kilometers. Transmission fluid is an oil product that keeps the gear system clean, ensuring the normal operation of the transmission and extending the life of the transmission device. Depending on the structure of the transmission, transmission fluids are divided into: 1. Manual transmission fluid, commonly referred to as gear oil. It is an important lubricating oil primarily made from petroleum lubricating base oil or synthetic lubricating oil, with the addition of extreme pressure anti-wear agents and oiliness agents. 2. Automatic Transmission Fluid (ATF), specifically designed for automatic transmissions. The specialized fluid used in automatic transmissions serves both as the hydraulic fluid for the torque converter and as the lubricating oil for the planetary gear structure and the hydraulic fluid for the shifting device.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.