What are the body dimensions of the NIO ES8?

1 Answers
Alan
07/30/25 1:31am
The NIO ES8 has body dimensions of 5022mm in length, 1962mm in width, and 1756mm in height, with a wheelbase of 3010mm, providing a very spacious interior. The NIO ES8 is a dual-motor model, with one motor on the front axle and another on the rear axle. The front motor has a maximum power of 240 kW and a maximum torque of 420 Nm, while the rear motor also has a maximum power of 240 kW and a maximum torque of 420 Nm. The NIO ES8 uses a ternary lithium battery, which is commonly used in most pure electric vehicles. Ternary lithium batteries have higher energy density and are lighter in weight.
Was this review help?
16
0
Share
More Forum Discussions

How to Turn Off the Start-Stop Function in the Excelle?

The method to turn off the start-stop function in the Excelle is by pressing the automatic start-stop adjustment button. Taking the 2021 Excelle as an example, it is a compact car with body dimensions of 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm and a curb weight of 1285kg. The 2021 Excelle features a McPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.3T turbocharged engine, delivering a maximum horsepower of 163PS, a maximum torque of 230Nm, and a maximum power of 120kW, paired with a 6-speed automatic transmission.
10
2
Share

What Causes the Squeaking Sound When Pressing the Accelerator in a Vehicle?

The causes of a squeaking sound when pressing the accelerator in a vehicle are: 1. Aging accelerator cable; 2. Mechanical wear between the accelerator pedal components; 3. Increased free play in the vehicle's mechanisms; 4. Clutch wear. The functions of the accelerator are: 1. Controlling the engine's speed by adjusting the pedal pressure; 2. Regulating the carburetor to determine the engine's output power. The working principle of the accelerator is: When the accelerator pedal is pressed, it directly controls the throttle valve. The throttle valve opening increases, allowing more air to enter the engine. At this point, the ECU commands the fuel injection system to inject more fuel, thereby increasing the engine's RPM and enabling the vehicle to accelerate.
5
1
Share

Why Won't My Car Start in Cold Weather?

The reasons why a car won't start in cold weather are as follows: 1. Battery depletion: When starting the car, the battery provides power to the entire system. If the battery is depleted, the starter motor will operate weakly, producing a clicking sound without the engine turning over. In winter, we often use the air conditioning, which is a power-intensive device. Additionally, driving at night with lights on and at low speeds consumes even more power, potentially leaving the car unable to start the next day. 2. Ignition system failure: Due to extremely cold weather, the intake air temperature is low, resulting in poor fuel atomization in the cylinders. Since gasoline engines rely on spark plugs to ignite the fuel, any fault in the ignition system that reduces spark energy can prevent combustion, even with ample fuel in the cylinders, rendering the engine inoperable and the car unable to start. 3. Frozen exhaust pipe: In low temperatures, the exhaust pipe mostly emits water vapor. If the car is used infrequently, this vapor can freeze in the muffler. Short trips exacerbate the issue as ice from previous days doesn't melt before new ice forms, eventually leading to a completely frozen muffler and preventing the car from starting. 4. Fuel flow obstruction: The engine requires fuel combustion in the cylinders to generate power. If fuel supply is disrupted during startup, the car cannot operate. In winter, low temperatures can cause residual oil in fuel lines to solidify, blocking the lines and impeding fuel delivery, making it difficult to start the car.
13
4
Share

Where can I check the tire pressure on the Baojun E200?

There is a black button at the bottom center of the dashboard. Each time you press it, the dashboard will display different vehicle parameter interfaces. Simply switch to the tire pressure parameter display interface. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure the tire pressure. It transmits the pressure information from inside the tire to a central receiver module via a wireless transmitter, then displays the tire pressure data for each tire. The system automatically alerts when the tire pressure is too low or there is a leak. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the differences in rotational speed between the tires, the system monitors the tire pressure. The indirect tire pressure alert system essentially relies on calculating the rolling radius of the tires to monitor pressure. Introduction to the Tire Pressure Monitoring System (TPMS): This system combines the advantages of both the above systems. It is equipped with direct sensors in two diagonally opposite tires and an indirect system for all four wheels. Compared to a fully direct system, this hybrid system reduces costs and overcomes the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data on the actual pressure in all four tires, as a direct system can.
6
3
Share

What does the letter 'A' with a circle on the car mean?

The letter 'A' with a circle on the car represents the auto start-stop function. The functions of auto start-stop are: 1. The engine can automatically shut off, reducing fuel consumption and emissions; 2. After the engine shuts off, the power supply can replace the belt pulley to provide operating power for the engine cooling fan and the car's air conditioning. The precautions for auto start-stop are: 1. Quickly shift to P gear when the engine stops and release the brake; 2. Reduce current consumption; 3. Do not repeatedly press the brake when the engine is off; 4. Let the engine speed drop to zero, engage the starter gear, and then start; 5. Do not activate the auto start-stop system during low-speed parking or when the air conditioning is on.
19
3
Share

Are All Focus Models Equipped with 3-Cylinder Engines?

The Focus models are all equipped with 3-cylinder engines. Taking the 2021 Focus as an example, it is a compact car with the following dimensions: length 4647mm, width 1810mm, height 1468mm, wheelbase 2705mm, fuel tank capacity 53 liters, and curb weight 1245kg. The 2021 Focus features a MacPherson strut front suspension and a torsion beam rear suspension. It is powered by a 1.5L naturally aspirated engine, delivering a maximum horsepower of 122PS, maximum torque of 153Nm, and maximum power of 90kW. It is paired with a 6-speed manual transmission.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.