What are the body dimensions of the new Santana?

1 Answers
DiCorey
07/29/25 11:06am
The new Santana has a body length of 4475 mm, width of 1706 mm, height of 1469 mm, and a wheelbase of 2603 mm. The new Santana adopts Volkswagen's standard three-box sedan design style, featuring smooth and regular body lines with a simple yet enduring design that aligns with contemporary aesthetics. The entire lineup of the new Santana is equipped with a 1.5-liter naturally aspirated engine, delivering a maximum power output of 82 kW and a maximum torque of 145 Nm. This engine is paired with either a 5-speed manual transmission or a 6-speed automatic transmission. The front suspension of the new Santana uses a MacPherson independent suspension, while the rear suspension employs a compound torsion beam non-independent suspension.
Was this review help?
20
1
Share
More Forum Discussions

Is the Taycan a pure electric vehicle?

The Taycan is a pure electric vehicle, which is a mid-to-large-sized high-performance car under the Porsche brand. It is a dual-motor model with a wheelbase of 2900 mm, and its length, width, and height are 4963 mm, 1966 mm, and 1395 mm respectively. The Porsche Taycan comes in both rear-wheel-drive and all-wheel-drive versions. The all-wheel-drive version has three configurations: Taycan 4S, Taycan Turbo, and Taycan Turbo S. The entire Porsche Taycan lineup uses ternary lithium batteries, which offer lighter weight and higher energy density. The front suspension of the Porsche Taycan features a double-wishbone independent suspension, while the rear suspension uses a multi-link independent suspension.
1
3
Share

What are the reasons for low fuel rail pressure?

The reasons for low fuel rail pressure include: 1. Fuel line blockage or excessive water content in the fuel causing low fuel rail pressure; 2. All cylinder injectors are connected to a common fuel pipe (referred to as the fuel rail), which maintains constant pressure. If damaged, it can lead to low fuel rail pressure; 3. If the fuel injectors are clogged or damaged, it can also cause low fuel rail pressure. Relevant information about the fuel pressure regulator is as follows: 1. Introduction: The fuel pressure regulator is a device that adjusts the fuel pressure entering the injectors based on changes in intake manifold vacuum, keeping the difference between fuel pressure and intake manifold pressure constant, thereby maintaining a consistent injection pressure under different throttle openings. 2. Function: The fuel pressure regulator is installed at one end of the fuel distribution pipe and serves two purposes: first, to regulate the fuel pressure in the supply system, maintaining a constant difference between system pressure and intake manifold pressure (the set value is generally 300 kPa); second, to dampen pressure pulsations generated by the fuel pump during fuel supply and pressure fluctuations caused by intermittent fuel injection.
17
4
Share

What to Do When Water Leaks into the Car Due to Clogged Sunroof Drainage Tubes?

When water leaks into the car due to clogged sunroof drainage tubes, you should use an air pump to blow high-pressure air into the drainage holes of the two front drainage tubes inside the sunroof to clear the blockage. After blowing, pour water into the sunroof and check if water flows out from the drainage outlets near the front wheels. If water flows out, the drainage tubes are successfully unclogged. Then, remove the accumulated water inside the car. There are several rubber plugs at the bottom of the vehicle chassis; opening these plugs can drain the accumulated water from the cabin. Below is more information about sunroof drainage tubes: 1. Sunroof Structure and Drainage Principle: The sunroof has two sliding rails on the left and right sides to allow front and back movement. At the front corners of these rails are the drainage holes, connected to a drainage channel between them. Rainwater enters the channel, flows to the drainage holes, and then through drainage tubes that run along the A-pillars of the car, exiting near the front wheel mudguards. Some drainage holes may also be located at the rear sides of the sunroof, with water exiting through the C-pillars. 2. Common Sunroof Leakage Issues: Clogged or broken drainage tubes. This can cause water to seep from the sunroof gaps into the interior. If the tubes are broken, water may also leak through the A-pillars or C-pillars. Another issue is aging sunroof seals, leading to water seepage. 3. Note: It is best not to open the sunroof when driving on bumpy roads. When the sunroof is open, some overlapping components may shift, and driving on uneven roads can not only make passengers uncomfortable but also easily damage the sunroof.
5
1
Share

How to Reset the Maintenance Reminder After Servicing a Chevrolet?

Methods to reset the maintenance reminder after servicing a Chevrolet: 1. Turn on the ignition; 2. Press the "Menu" button on the audio control panel until "OilLifeReset" appears on the audio display; 3. Hold down the "Enter" button on the audio control panel for at least 1 second, at which point the audio display will show "Acknowledged" for approximately 3 seconds; 4. After completing these steps, the maintenance reminder will be reset. Chevrolet offers a variety of sedans and SUVs, among which the Malibu is a mid-size sedan. The Malibu measures 4855 mm in length, 1854 mm in width, and 1476 mm in height, with a wheelbase of 2737 mm. The Malibu is equipped with four engine options: a 1.5-liter turbocharged engine, a 1.6-liter turbocharged engine, a 2.0-liter naturally aspirated engine, and a 2.4-liter naturally aspirated engine.
8
3
Share

Has the Phaeton been discontinued?

The Phaeton has been discontinued. The Phaeton was an imported large luxury sedan under the Volkswagen brand. In terms of body dimensions, the car measured 5197 mm in length, 1903 mm in width, and 1450 mm in height, with a wheelbase of 3001 mm. Power-wise, the Phaeton was equipped with a total of 6 engines, with the top model featuring a 6.0-liter W12 naturally aspirated engine. This engine delivered 450 horsepower and a maximum torque of 560 Nm, with a maximum power output at 6050 rpm and peak torque available between 2750 to 5200 rpm. The engine utilized direct fuel injection technology and was constructed with an aluminum alloy cylinder head and block.
9
4
Share

Why is there no sound from the Highlander's reversing radar?

If you find that the reversing radar is not working, first check whether the power cord of the main unit is properly connected and if there is any current. Then, check if the radar main unit wire has become loose. If both are fine, the issue might lie with the radar itself. Here are some scenarios where the radar might be malfunctioning: 1. Check if the buzzer is damaged. In this case, you will need to purchase and install a new buzzer. 2. Check if your vehicle has undergone any recent modifications. If modifications have been made, it's possible that the reversing radar's wiring was damaged during the process. When the reversing radar is not working, first check if the wiring connection at the bumper is intact. Then, check if the reversing light turns on when the reverse gear is engaged. If it doesn't, check if the reversing light's connection switch is damaged. Next, check if the computer displays any fault codes. If none of these issues are present, then check if the reversing radar itself is malfunctioning.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.