What are the body dimensions of the new Sagitar?

1 Answers
VonEmersyn
07/29/25 6:38pm
The new Sagitar has body dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm. In terms of interior design, compared to the current model, the new Sagitar has undergone significant changes, especially in terms of interior craftsmanship, materials, and configurations, where the improvements are quite noticeable. The dashboard features robust lines, and the infotainment screen area is tilted towards the driver's side. The gear shift lever is surrounded by numerous physical buttons, while the inclusion of a digital instrument cluster and a panoramic sunroof are notable highlights. The car also comes equipped with ACC adaptive cruise control and an electronic parking brake. Under the hood, it is powered by a 1.2T engine paired with a 7-speed dual-clutch transmission, delivering a maximum output of 116 horsepower.
Was this review help?
14
5
Share
More Forum Discussions

Can Beer Be Stored in the Car Trunk?

Beer is not recommended to be stored in the car trunk. Reasons for not storing it: In summer, the weather is hot, and the temperature inside the car is even higher than outside. Storing beer in such conditions may cause the temperature inside the beer cans to rise excessively, leading to expansion and rupture. Beer packaging typically indicates a storage temperature range of 5°C to 25°C. Temperatures above or below this range can easily cause beer bottles to explode. During the beer production process, carbon dioxide is pressurized into the bottles. The constant jostling during car movement can cause the carbon dioxide inside the bottles to be continuously released, potentially leading to spontaneous bursting of the beer bottles. It can alter the taste: Beer stored in the car, due to high temperatures, may have its flavor balance disrupted, resulting in poor taste. Additionally, the bitterness from hops and tannins can be oxidized. Therefore, beer is best stored in a cool place or a refrigerator. Besides beer, other alcoholic beverages like white wine and red wine, as well as carbonated drinks and mineral water, should also not be stored in a high-temperature car.
3
2
Share

How to open the fuel tank cap from inside the Nissan Sylphy?

The fuel tank cap release button of the Nissan Sylphy is located inside the vehicle's cockpit. The fuel tank cap switch button is positioned below the steering wheel, where there are two buttons—the one on the far left is the fuel tank cap switch. Below is more information about the Sylphy: 1. The Sylphy is a mid-size sedan under Dongfeng Motor Co., Ltd., and is one of the most typical mainstream family cars in the Chinese market. 2. On August 28, 2020, the 2021 Nissan Sylphy was officially launched by Dongfeng Nissan. Based on the 14th generation Sylphy, the new model has been further enhanced with more intelligent human-machine interconnection technology, exterior accessories, and comfort configurations. It is available in four variants, all powered by a 1.6L naturally aspirated engine that meets the China VI emission standards, delivering a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm, paired with a CVT transmission.
1
3
Share

What is the function of the car OBD interface?

OBD is the abbreviation of On-Board-Diagnostic, which translates to "On-Board Diagnostic System". This system continuously monitors the operating conditions of the engine and the working status of the exhaust after-treatment system. Once it detects a situation that may cause excessive emissions, it will immediately issue a warning. The OBD interface in cars mainly has four functions: 1. Display of engine control unit data: The OBD interface can provide various operational data of the vehicle, such as data displayed on the vehicle dashboard, various fuel consumption records, battery voltage, air-fuel ratio, throttle opening, knock count, etc.; 2. Reading fault codes: The OBD interface can be used to read fault codes, which helps in quickly diagnosing vehicle faults and reduces the time required for manual diagnosis; 3. Changing codes to enable more functions: By connecting the vehicle's CAN bus via the OBD interface data cable and adjusting the codes of various modules, many different "hidden" functions can be enabled, achieving "additional configurations"; 4. Reading and flashing ECU-TCU programs: This allows manufacturers to update the ECU control programs at any time, but it is not recommended to modify them by oneself.
20
1
Share

How long does it take for the smell of sprayed chassis armor to dissipate in the car?

The smell of sprayed chassis armor in the car can dissipate in about two weeks. Here are some methods to eliminate odors in the car: Ventilate by opening windows and doors: First, open the windows and doors to let the circulating air dilute and disperse the toxic gases inside the car. While driving, try to keep the windows open as much as possible to allow the wind to blow away the toxic gases, which also helps quickly remove odors from the new car. Place activated carbon in the car: Activated carbon has numerous capillaries that possess strong adsorption properties. When toxic gases in the air come into contact with activated carbon, they are adsorbed by these capillaries, thereby purifying the air. Install a car air purifier: Car air purifiers work on the principle of active odor removal, breaking down toxic molecules into harmless gases. They can effectively eliminate odors, as well as bacteria and toxic substances in the car.
8
2
Share

How often should the spark plugs of an Audi Q3 be replaced?

Audi Q3 spark plug replacement cycle: Under normal maintenance conditions, replacement is recommended after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type. It is advisable to follow the instructions in the user manual. You can refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. How spark plugs work: The ground electrode of the spark plug is connected to the metal shell, which is in turn connected to the engine block via the threads on the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it ionizes the medium between the central electrode and the ground electrode, generating a spark that ignites the air-fuel mixture in the cylinder.
5
0
Share

Where is the urea solution added in a car?

Urea solution is added into a dedicated urea storage tank in the car, located near the fuel tank. Here is relevant information about automotive urea: 1. Function of automotive urea: Generally, adding urea to vehicles primarily aims to reduce exhaust emissions, as diesel engines emit nitrogen oxides and carbon particles. 2. National regulations: Due to significant harm to humans and the environment, China's National IV standard implemented in 2008 mandates the use of automotive urea in the emission reduction systems of diesel vehicles.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.