What are the body dimensions of the new Jetta SUV VS5?

What is the reason for the sudden dimming of the Envision dashboard lights?

The reason for the sudden dimming of the Envision dashboard lights is due to a slight battery drain. Taking the 2021 Envision as an example, it is a mid-size SUV with body dimensions of: length 4694mm, width 1839mm, height 1686mm, wheelbase of 2750mm, and a body weight of 1610kg. The 2021 Envision features a front suspension with MacPherson independent suspension and a rear suspension with multi-link independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, a maximum torque of 250Nm, and a maximum power of 124kW, paired with a 7-speed dual-clutch transmission.

1

3

Share

How to set the automatic downward tilt of the rearview mirror when reversing in Audi A6L?

Audi A6L's method for setting the automatic downward tilt of the rearview mirror when reversing is: 1. Turn on the car's power without starting the engine; 2. Set the memory seat; 3. Select the rearview mirror on the side you want to set and press the rearview mirror adjustment selection button; 4. Step on the brake and shift to R gear; 5. Press and hold the seat memory key; 6. Step on the brake and shift to P gear, then press the rearview mirror adjustment selection button once more to complete the setup. Taking the 2021 Audi A6L as an example, it is a mid-to-large-sized car with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase of 3024mm, minimum ground clearance of 117mm, and a body weight of 1800kg.

16

5

Share

What are the reasons for the car rolling when in P gear?

The reasons for the car rolling when in P gear are: 1. The driver did not step on the brake or pull the handbrake, causing the vehicle to roll due to inertia; 2. Insufficient power when the car is idling or in neutral, or the slope is too steep, leading to the vehicle rolling when in D gear due to lack of power; 3. Delayed power response when releasing the brake and stepping on the accelerator, causing the car to roll. Precautions for driving an automatic transmission car are: 1. Do not shift into P gear while driving; 2. After driving, the engine must be turned off and shifted into P gear before the key can be removed; 3. Do not shift into N gear to coast while driving; 4. When starting the vehicle in P or N gear, remove the gear lever from P gear while stepping on the brake, turn on the power, step on the brake, shift to N gear, and after ignition, shift into D gear to move forward directly.

16

3

Share

Where is the seat heating switch for Cadillac XT5?

The seat heating switch for Cadillac XT5 is located near the temperature control device on the center console. Taking the Cadillac XT5 as an example, it is a mid-size five-door five-seat SUV with body dimensions of: length 4813mm, width 1903mm, height 1682mm, and a wheelbase of 2857mm. The Cadillac XT5 is equipped with a 2.0T turbocharged engine and a 9-speed automatic manual transmission, with a maximum power of 174kW and a maximum torque of 350Nm. Its drive mode is front-wheel drive, with the front suspension using a MacPherson independent suspension and the rear suspension using a five-link independent suspension.

2

1

Share

What is the troubleshooting method for fault code p1297?

Fault code p1297 troubleshooting methods are: 1. Disconnect the ECU backup power fuse for more than 20 seconds; 2. Remove the negative ground terminal of the battery for more than 20 seconds; 3. Use a diagnostic scanner to read data streams and clear the fault codes. The fault code refers to throttle or accelerator pedal position sensor malfunction. Precautions for cleaning the throttle body include: 1. Avoid using highly corrosive cleaners; 2. Be careful with cleaning force to prevent damaging the coating. The method for cleaning the throttle body is: 1. Remove the intake hose to expose the throttle body; 2. Disconnect the battery negative terminal, turn off the ignition switch, straighten the throttle plate, spray a small amount of carburetor cleaner into the throttle body, then wipe with polyester cloth or high-density non-woven fabric.

5

0

Share

Where is the steering wheel heating in Mercedes-Benz E?

The steering wheel heating in Mercedes-Benz E is located on both sides of the steering wheel. There is a small button on the side of each multifunction key, and pushing it inward activates the heating. The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft to control the vehicle. The purpose of the steering wheel heating function is to warm the steering wheel during cold seasons, ensuring the driver does not feel uncomfortable or cold when holding it. The working principle of the steering wheel heating function involves embedding a layer of resistance wire inside the leather of the steering wheel. The power supply line provides electricity to the resistance wire through the connection point below the steering wheel and the steering shaft, thereby generating heat.

20

4

Share

What are the body dimensions of the new Jetta SUV VS5?

What is the reason for the sudden dimming of the Envision dashboard lights?

How to set the automatic downward tilt of the rearview mirror when reversing in Audi A6L?

What are the reasons for the car rolling when in P gear?

Where is the seat heating switch for Cadillac XT5?

What is the troubleshooting method for fault code p1297?

Where is the steering wheel heating in Mercedes-Benz E?

What can be extracted from a three-way catalytic converter?

What is the method for matching the sunroof of the 2018 Volkswagen Lamando?

What is the reason for the buzzing noise from the seat belt in the car's B-pillar?

Should the ESP Vehicle Stability System Be Turned On?