What are the body dimensions of the new BMW X1?

2 Answers
ChloeAnn
07/29/25 2:23pm
The body dimensions of the new BMW X1 are: length 4565 mm, width 1821 mm, height 1620 mm, with a wheelbase of 2780 mm. It belongs to the compact SUV category, offering relatively spacious interior. The fuel tank capacity is 61 liters, and the trunk volume is 505 liters. The new BMW X1 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 103 kW and a maximum torque of 220 Nm, paired with a 7-speed dual-clutch transmission. In terms of suspension, the new BMW X1 features a front MacPherson independent suspension and a rear multi-link independent suspension.
Was this review help?
18
0
Share
McMason
08/13/25 6:39am
I've been studying car data for years, and the dimensional changes in the new BMW X1 are particularly interesting. Its length of 4616mm is 51mm longer than the previous model, while the width of 1845mm is slightly narrower, and the height of 1641mm remains about the same. The most crucial change is the wheelbase extended to 2802mm, which is 22mm longer than the previous generation. The rear seat space has become noticeably more spacious - when I sat inside, there was a full two-fist distance between my knees and the front seat. The trunk capacity has also increased to 540L, easily accommodating a baby stroller. However, the lower body height makes parking more convenient - it can fit into tight urban parking spots with just one maneuver.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

Which Side is Left Reverse Parking, Which Side is Right Reverse Parking?

Left reverse parking involves turning the steering wheel fully to the left, while right reverse parking involves turning the steering wheel fully to the right. Below are reference methods for left and right reverse parking: When to turn the steering wheel to the right: Control the clutch properly, gradually release it, and the car will start moving forward. Maintain a steady speed and pay attention to the left rearview mirror. When the lower edge of the mirror aligns with the line, quickly turn the steering wheel fully to the (left) right. The reference methods for left and right reverse parking are essentially the same. When to straighten the steering wheel: After turning the steering wheel fully to the right, continue reversing without stopping. Now, focus on the right rearview mirror. When the nearest corner of the garage's right line becomes visible in the mirror, maintain a distance of 30cm between the car and the corner. This is a standard to judge whether the parking is accurate. If the 30cm distance is just right, no further adjustments are needed. Gradually reverse until the line and the car body are parallel, then straighten the steering wheel and slowly reverse into the garage. When to stop: During the process of reversing into the garage, pay attention to the left rearview mirror. When the lower edge of the mirror aligns with the front line of the garage, stop the car. The reverse parking is now complete. Exiting the garage: Press the clutch, shift into first gear, and start slowly. At this time, focus on the engine hood in front of the car. When the roadside line is no longer visible, turn the steering wheel to the left, straighten the car body, and then straighten the steering wheel. Stop the car when your left shoulder aligns with the finish line.
9
0
Share

Where is the blower resistor located in the Nissan X-Trail?

In the front passenger side, on the glove box. It is installed on the air conditioning air box. The blower resistor mainly controls the speed of the blower. If the blower resistor is faulty, the blower speed will remain the same across different gear positions. After the blower resistor fails, the air volume control knob loses its speed adjustment function. Below is relevant information: Blower: The blower is an important component in the automotive air conditioning system and is also a part that is very prone to damage. Automotive Air Conditioning: Whether for cooling or heating, the automotive air conditioning system cannot function without the blower. The principle of automotive air conditioning is actually quite simple. During heating, the high-temperature coolant from the engine flows through the heater core. This allows the heater core to heat the air delivered by the blower, enabling the air conditioning vents to blow warm air.
4
0
Share

Is Vehicle Interior Modification Illegal?

Modifying the interior is not illegal as long as it does not affect safe driving. However, seats cannot be removed, and the vehicle's structure cannot be altered. The structural characteristics registered with the vehicle management office must not be changed without authorization. Here are the relevant details: 1. Prohibited Situations: No unit or individual may assemble a motor vehicle or alter its registered structure, construction, or characteristics without permission. The vehicle's structure includes mandatory standards such as body color, length, width, height, and the engine's technical parameters. 2. Required Procedures: Before modifying a licensed vehicle, the owner must register and declare the modifications to the vehicle management office. The modification plan must be reviewed and approved by the office before proceeding. After modification, the owner must complete the modification change procedures with the vehicle management office. 3. Key to Legality: The legality of vehicle modifications depends on whether the vehicle matches the photo on the driving license and complies with the factory technical parameters. If not, it will fail the annual inspection.
19
5
Share

What does it mean when the car displays 'Please check SRS system'?

Please check SRS system means there is a fault in the airbag or seat belt pretensioner system. An airbag is a device that inflates to protect occupants before a secondary collision occurs during a crash. Its components include: 1. Airbag sensor; 2. Anti-collision airbag and electronic control unit. Here are precautions for using car airbags: 1. Maintain an appropriate distance from the airbag while in the car; 2. Do not place objects in front of, above, or near the airbag; 3. Keep a certain distance between the driver's chest and the steering wheel; 4. Do not modify the airbag system or its surrounding layout without authorization.
15
1
Share

Why is it possible to overtake on windy days?

There are no regulations prohibiting overtaking on windy days. Overtaking is permissible provided that the conditions allow it, with good visibility and no oncoming vehicles, ensuring safety. Below is a detailed introduction regarding automotive safety: Overview: Automotive safety is primarily divided into two major aspects: active safety and passive safety. Active safety involves the ability to control the vehicle as smoothly as possible. Whether braking or accelerating in a straight line or steering left and right, the maneuvers should be as stable as possible to avoid deviating from the intended path, without compromising the driver's visibility and comfort. Additional Information: The scope of automotive safety technology is becoming increasingly broad and detailed, moving towards integration, intelligence, systematization, and universalization. Strictly controlling speed during nighttime driving is a fundamental measure to ensure safety.
3
3
Share

What type of oil is used in a single-cylinder diesel engine?

Single-cylinder diesel engines use CD or CF grade oil, with viscosity options such as 10W-30, 15W-40, or 20W-50. The oil grade should be selected based on the diesel engine's load and working environment. Relevant information about engine oil is as follows: Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), serves multiple functions including lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the 'blood' of a vehicle. Composition: Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricating oil, determining its fundamental properties. Additives are used to compensate for and improve any deficiencies in the base oil's performance, while also imparting certain new characteristics, making them an essential part of lubricating oil.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.