···
Log in / Register

What are the body dimensions of the Mazda CX-8?

3 Answers
DelilahMarie
08/26/25 4:04am
Mazda CX-8 body dimensions are: length 4955mm, width 1842mm, height 1733mm, wheelbase 2930mm, and curb weight 1749kg. Taking the 2019 Mazda CX-8 as an example, it is equipped with a 2.5L naturally aspirated engine, with a maximum horsepower of 192PS, maximum power of 141kW, maximum torque of 252Nm, and is paired with a 6-speed automatic transmission. The 2019 Mazda CX-8 features a front suspension of MacPherson independent suspension with a stabilizer bar and a rear suspension of multi-link independent suspension with a stabilizer bar.
Was this review help?
8
1
Share
VanVincent
09/08/25 5:08am
I drove a Mazda CX-8 for a while, with a body length of around 4955mm, width of 1842mm, height of 1733mm, and a wheelbase reaching 2930mm. These dimensions are particularly practical for large families. On our last family road trip with six people, two middle schoolers sat comfortably in the third row without feeling cramped, and we could fit three 28-inch suitcases standing upright. The ground clearance is just right, making it easy for elderly passengers to get in and out, and it doesn't scrape the bottom on rural dirt roads. Despite being nearly 5 meters long, the turning radius is smaller than expected, allowing it to navigate narrow market streets slowly. I must say the space design is ingenious—it's actually shorter than the Highlander but has a longer wheelbase, resulting in more spacious rear legroom.
Was this review help?
4
4
Share
Expand All
VanValerie
10/22/25 5:12am
Attention to those interested in this vehicle, check the dimensions: length 4955mm, width 1842mm, height 1733mm, wheelbase 2930mm. Compared to SUVs in the same class, it has a more elongated body but moderate width, making it less challenging to navigate through narrow alleys. What I appreciate most is how the designers balanced interior and exterior space—the sloping roofline doesn't compromise rear headroom; with my height of 173cm, there's still a fist's width of space above my head in the third row. The rear window is generously sized, offering much better reversing visibility than some boxy SUVs. On weekends, loading two children's bikes plus camping gear is effortless—this size is tailor-made for urban family life.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

What kind of driver's license is required for yellow-plate vehicle drivers?

Yellow-plate vehicles require drivers to hold either a Class B or Class A driver's license. Yellow-plate vehicles are categorized into large trucks and large buses. Large trucks require either a B2 or A2 license, while large buses require an A1 license. Below is some information about license plate colors: Yellow-plate vehicles: Generally refer to large vehicles, such as trucks over 2 tons or buses. Large civilian vehicles: License plates feature yellow background with black characters; small civilian vehicles have blue background with white characters. Other license plates: Learner's plates have blue background with white characters, prefixed with the character "Learner". Temporary plates have white background with red characters, prefixed with the word "Temporary".
12
5
Share

How Long Does It Take to Replace a Car Door?

Replacing a car door takes 4-5 hours. Here are the considerations for door replacement: Choose a Professional Service: Door replacement has high requirements for parts. It is best to use an original manufacturer's door, and the color should match the vehicle. Considering color differences and part reliability, it is recommended to have the door replaced at a 4S shop. Check Installation Quality: Observe if the gap width of the car door is uniform and if the surface is smooth, otherwise, noise issues may occur. Check the door's sealing integrity to avoid rain or wind leakage. Repeatedly open and close the door to test for smooth operation or any unusual noises.
12
1
Share

Reasons for High Engine RPM but Low Vehicle Speed

Reasons for high engine RPM but low vehicle speed may include throttle valve malfunction and other causes. Below are detailed explanations of the potential faults: Throttle Valve Malfunction: The throttle valve is a controllable valve that regulates the flow of air into the engine. After entering the intake manifold, the air mixes with fuel to form a combustible mixture for combustion. If the throttle valve malfunctions, causing it to open suddenly, the engine RPM may spike abruptly. Fuel Pump and Fuel System Faults: Fuel injector leakage or clogging can prevent proper fuel injection as commanded by the electronic control unit, resulting in an overly rich or lean mixture. This may cause poor performance in individual cylinders and rough idling.
2
5
Share

What is the function of a car caliper?

Function of a car caliper: It serves to decelerate moving wheels, bring them to a stop, or maintain a stationary state, typically used exclusively in disc brake systems. It is the protruding part on the outer side of the brake pad, a component that enhances braking performance. The disc brake system in a car consists of a brake fluid pump, a brake disc connected to the wheel, and the brake caliper on the disc. During braking, high-pressure brake fluid pushes the piston inside the caliper, pressing the brake pads against the brake disc to generate the braking effect. Car calipers come in three colors: red, yellow, and gray. Yellow brake calipers are used on ceramic brakes and are the default brakes for Porsche GT3 models, usually found on cars with outstanding dynamic performance.
12
0
Share

The Accelerator Pedal is Too Stiff to Press

The reason why the accelerator pedal is hard to press may be due to excessive carbon deposits, poor fuel quality, or spark plug failure. Here are the related solutions: Excessive Carbon Deposits: There are many carbon deposits on the throttle valve, fuel injector, and intake manifold. Many malfunctions are caused by carbon deposits, and some vehicles may experience jerking, which is also related to carbon deposits. It is recommended to regularly clean the carbon deposits. Poor Fuel Quality: This leads to incomplete combustion. It is recommended to refuel at reputable gas stations with higher-quality gasoline. Spark Plug Failure: This can cause misfires, etc. It is necessary to go to a repair shop for inspection and timely maintenance to avoid more safety hazards.
5
1
Share

How to Replace the Cabin Air Filter in an Old Tiida?

Method for replacing the cabin air filter in an old Tiida: Remove the glove box and proceed with the replacement. It is recommended to replace the cabin air filter annually, as its function is to filter outside air to maintain fresh air inside the vehicle. Functions of the cabin air filter: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin; 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. The Tiida is a vehicle produced by Dongfeng Nissan Passenger Vehicle Company, with dimensions of 4393 mm in length, 1766 mm in width, and 1524 mm in height. The Tiida's engine utilizes technologies such as variable valve timing and double overhead camshafts, with an all-aluminum inline four-cylinder configuration.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.