What are the body dimensions of the Lavida and Santana?

Can You Turn on the Fan Without Starting the Car?

You cannot turn on the heater. Here is the relevant information: 1. Turning on the heater without starting the car will cause the battery to discharge without being charged, which can damage the battery. 2. Turning on the heater without starting the car can burn the wires supplying the heater due to the lack of current. 3. If the car breaks down, you can turn on the heater for about ten minutes to warm up the interior and then turn it off, which will not have a significant impact on the car. Additional information: The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the cabin. It provides a comfortable environment for passengers, reduces driver fatigue, and improves driving safety.

12

1

Share

What is the difference between BMW X1 and Brilliance BMW X1?

The differences between BMW X1 and Brilliance BMW X1 are as follows: 1. Power: BMW X1 only has a 1.5T model, while Brilliance BMW X1 has a 2.0T. 2. Interior: The BMW X1's screen size is conventional, whereas the Brilliance BMW X1 has a larger screen size and introduces an 'M'-style steering wheel for the first time on this model. 3. Exterior: The Brilliance BMW X1 has a wheelbase of 2780mm, and the BMW X1 has a body length of 4565mm, offering spacious rear seating, comfortable seats, strong acceleration, and precise steering.

4

Share

How Many Digits is a VIN?

The VIN consists of 17 digits. The full name of the VIN is Vehicle Identification Number, abbreviated from Vehicle-Identification-Number, commonly referred to as VIN. It is composed of 17 digits and is also known as the 17-digit identification code or 17-digit number. Below is an introduction to the VIN: 1. The VIN is divided into four main parts: digits 1~3 represent the World Manufacturer Identifier (WMI); digits 4~8 represent the Vehicle Descriptor Section (VDS); digit 9 is the check digit; and digits 10~17 represent the Vehicle Identifier Section (VIS). 2. The meaning of the VIN may vary slightly depending on the country or the automobile manufacturer.

17

4

Share

What does 'Please shift to P gear' mean?

It is continuously displaying 'Please shift to P gear' due to a damaged gear shift switch. Below is relevant information: 1. The function of gear shifting: It is used to change the torque and speed of the engine crankshaft to meet the varying requirements of traction force and speed for the driving wheels under different driving conditions such as starting, accelerating, driving, and overcoming various road obstacles. 2. The functions of other gears: They allow the car to drive at a very low and stable speed, which is difficult to achieve solely by the minimum stable speed of the internal combustion engine; the reverse gear of the transmission enables the car to move backward; the neutral gear allows the car to separate the engine from the transmission system for a long time when starting the engine, parking, or coasting.

4

Share

How to Use the S Gear in the 2019 Bora?

Usage of the S gear in the 2019 Bora: The S gear is the car's sport mode. In S gear sport mode, the transmission can shift freely, but the shift timing is delayed, allowing the engine to maintain high RPM for a longer period. This enables the car to travel at high RPM in lower gears for an extended time, thereby achieving greater torque output and acceleration. While driving, simply push the gear lever into the S gear position. It is typically used for climbing hills and quick overtaking. The Bora is a compact car from FAW-Volkswagen, equipped with a 1.2T 116 horsepower L4 engine and a 7-speed dual-clutch transmission. The engine has a maximum power of 85 kW and a maximum torque of 200 Nm.

3

0

Share

What does BSM mean when displayed on a car?

BSM stands for Blind Spot Monitoring system, also known as Lane Change Assist system. It helps to avoid collisions or scrapes caused by not seeing vehicles approaching from behind when changing lanes during driving. Additional information: 1. Reducing lane-changing safety hazards: The system uses radar sensors hidden inside the left and right sides of the rear bumper to monitor the area up to 20 meters behind the vehicle in real time. If a vehicle or other obstacle is detected within the driver's blind spot, it immediately sends an alert to the receiving device installed on the edge of the rearview mirror, reducing the risk of collisions during lane changes. 2. Reducing judgment uncertainty: The Blind Spot Monitoring system minimizes uncertainty in judgment by allowing the driver to observe the distance between vehicles through the system, thereby enhancing overall vehicle safety.

11

2

Share

What are the body dimensions of the Lavida and Santana?

Can You Turn on the Fan Without Starting the Car?

What is the difference between BMW X1 and Brilliance BMW X1?

How Many Digits is a VIN?

What does 'Please shift to P gear' mean?

How to Use the S Gear in the 2019 Bora?

What does BSM mean when displayed on a car?

What is the difference between ABS brakes and CBS?

How Much Does It Cost to Repair an Audi Transmission?

How to Replace the Battery in a Mercedes-Benz SL-Class Key?

Do You Need to Press the Clutch When Stalling a Manual Transmission?