What are the body dimensions of the Jeep Wrangler?

1 Answers
OJudah
07/30/25 1:40am
Jeep Wrangler has a wheelbase of 2459 mm, with length, width, and height measuring 4334 mm, 1894 mm, and 1839 mm respectively. Powertrain: The Wrangler is an off-road vehicle under the Jeep brand, equipped with a 2.0-liter turbocharged engine. This engine delivers 266 horsepower and a maximum torque of 400 Nm, achieving peak power at 5000 rpm and maximum torque at 3000 rpm. The engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. Suspension: The Wrangler employs a solid axle suspension at both the front and rear. Using solid axle suspensions on both ends enhances the vehicle's off-road performance and capability to escape challenging terrains. The Wrangler is also equipped with a part-time four-wheel-drive system, which further boosts its off-road prowess.
Was this review help?
19
4
Share
More Forum Discussions

Is a 7-seater vehicle inspected annually or biennially?

For a 7-seater vehicle, if it is within the first 6 years of being new, it is inspected every 2 years. After that, within the next 15 years, it is inspected annually, and thereafter, it is inspected twice a year. Below is relevant information about vehicle annual inspections: Definition: National regulations stipulate that motor vehicles must periodically pass tests for exhaust emissions, vehicle appearance, lights, brakes, chassis, etc., and upon meeting the standards with no traffic violation records, an inspection compliance label is issued. All annual inspection dates are based on the registration date listed on the vehicle's license. From the date of registration, motor vehicles must undergo safety technical inspections within the following timeframes, commonly referred to as "annual inspection" or "annual review." Purpose: Vehicle annual inspections help promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents.
3
0
Share

What are the components of brake fluid?

Brake fluid consists of polyethylene glycol ether solvent, lubricant base fluid, and a small amount of additives. Brake fluid, also known as brake oil or mineral oil brake fluid, has properties such as oxidation stability, anti-foaming, anti-rubber expansion, and anti-rust. Its replacement cycle is related to the braking process during driving and the vehicle's braking system. Brake fluid has water-absorbing characteristics, and if not replaced for a long time, the safety factor of driving will decrease. For vehicles that are used frequently, the brake fluid can be replaced at around 30,000 kilometers; for those used less frequently, the replacement cycle can be extended accordingly, generally at around 50,000 to 60,000 kilometers.
16
4
Share

What is the Kawasaki H2C?

Kawasaki H2C is a motorcycle. Here is relevant information about the Kawasaki H2C motorcycle: Production: The supercharger blades of the Kawasaki H2C are made by 5-axis CNC machining from a single piece of forged aluminum, with a diameter of only 69mm. The impeller consists of six large and six small blades, and the intentionally designed small grooves on the base help airflow. Advantages: To perfectly transmit crankshaft power to the supercharger, the Kawasaki H2C uses a planetary gear designed by Kawasaki Aerospace. It has the advantages of small size and low loss. The entire device has a crankshaft amplification ratio of 9.2 times, meaning that when the engine reaches the redline speed of 14,000 rpm, the supercharger blade speed will reach up to 130,000 rpm.
2
2
Share

Can I Apply for the Inspection Exemption Label for Vehicles on 12123?

You can apply for the inspection exemption label for vehicles on the 12123 platform, as it is a comprehensive traffic management platform that handles not only driver's license tests but also vehicle annual inspection matters. Below is the relevant information about vehicle annual inspection: Content: Check whether the engine, chassis, body, and their auxiliary equipment are clean, complete, and effective; whether the paint surface is uniform and aesthetically pleasing; whether the main assemblies have been replaced; and whether they match the initial inspection records. Relevant procedures: For vehicles that cannot undergo inspection on schedule due to long-term tasks in other locations, the owner should submit an application. The local vehicle management office will then entrust the vehicle management office at the task location to conduct the inspection on their behalf. After the inspection, the results will be reported back to the original vehicle management office. Vehicles that cannot undergo annual inspection on schedule due to special circumstances should apply for an extension in advance with the local vehicle management office.
6
3
Share

Can a C1 License Be Used to Ride an Electric Motorcycle?

C1 license holders are not permitted to operate electric motorcycles because the C1 license does not cover them. To ride an electric motorcycle, you must have a D, E, or F license. Vehicles Permitted Under a C1 License: The C1 driver's license allows the operation of small and mini passenger vehicles, light and mini cargo vehicles, and light, small, and mini special-purpose vehicles. Small passenger vehicles must have a seating capacity of nine or fewer people. Vehicles Not Permitted Under a C1 License: large buses, tractors, city buses, medium-sized buses, large trucks, regular three-wheeled motorcycles, regular two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, the C1 license does not permit the operation of vehicles with more than nine seats or trucks with a total length exceeding six meters.
11
3
Share

Should the stones in the tires be cleaned?

Tire stones should be cleaned because if they are not cleaned, over time more and more small stones will get stuck in the tires, causing abnormal noises in the car. The following is a related introduction to car tire maintenance: Regular tire pressure checks: Inflate underinflated tires in time to maintain consistent tire pressure. Otherwise, it will cause rapid wear of low-pressure tires, increase driving resistance, increase fuel consumption, and may also lead to issues like directional deviation. Avoid hitting obstacles: When the vehicle is driving at high speed, hitting obstacles such as potholes can cause severe squeezing deformation of the tire between the obstacle and the rim flange, leading to damage to the tire cord fabric, air inside the tire breaking through the damaged fabric to form bulges, and in severe cases, causing the tire sidewall to rupture and sudden tire deflation.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.