What are the body dimensions of the Huansu S7?

2 Answers
DelilahLee
07/29/25 1:28am
The body dimensions of the Huansu S7 are: length 4800 mm, width 1850 mm, height 1770 mm, with a wheelbase of 2780 mm. It is a mid-size 5-door 7-seat SUV under BAIC Yinxiang, with a fuel tank capacity of 50L and tire specifications of 225/60R17. The Huansu S7 is equipped with a 1.5T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 110 kW and a maximum torque of 220 Nm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
Was this review help?
19
3
Share
LucyRose
08/12/25 5:34am
I've been driving for several years, and the Huansu S7, as a seven-seater SUV, has specific body dimensions: length 4800mm, width 1850mm, height 1770mm, and a wheelbase of 2780mm. These numbers really require attention when driving in the city. For example, the width of 1850mm can be a bit challenging in narrow alleys or tight parking spaces. I once drove it downtown and had to turn very slowly, afraid of scraping the sides. However, the upside is the super spacious interior. With the rear seats folded flat, the cargo capacity is impressive. Last time I moved, I managed to fit several large boxes in it. The overall size is quite generous, making the ride stable, but the fuel consumption is slightly higher. On suburban roads and highways, this car is exceptionally comfortable, gliding smoothly like a big river.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What Causes the Random Jumping of the Buick Excelle Door Locks?

Buick Excelle door locks jumping randomly can be due to water ingress in the wiring, damage to the central locking control unit, or failure of the central locking mechanism. Below are specific details about the Excelle: 1. Body Dimensions: The vehicle measures 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm, a fuel tank capacity of 44 liters, and a curb weight of 1285kg. 2. Powertrain Configuration: The 2021 Excelle Automatic Light Hybrid Base model features a MacPherson strut front suspension and a multi-link rear suspension. It is powered by a 1.3T turbocharged engine delivering a maximum horsepower of 163PS, peak power of 120kW, and maximum torque of 230Nm, paired with a 6-speed automatic transmission.
7
5
Share

What Causes the Obvious Gear Shift Impact in the Buick LaCrosse?

It may be caused by poor matching during the transmission's gear shift control process, or it could be due to wear and tear of the transmission gears. The specific situation requires a detailed inspection at a 4S shop. Below are detailed introductions about the Buick LaCrosse: 1. Body Dimensions: The car is 5026mm long, 1866mm wide, and 1462mm high, with an ultra-long wheelbase of 2905mm, providing spacious driving and riding space for a mid-to-large luxury sedan. 2. Safety Features: The 2021 Buick LaCrosse adds a second-generation HD streaming media rearview mirror, supporting one-key switching between a conventional rearview mirror and streaming media. It also features adaptive brightness adjustment, field of view zoom, and vertical angle zoom functions. The rear visibility range is three times that of a traditional car rearview mirror, significantly improving the clarity of rear images during night driving.
10
5
Share

What Are the Causes of Overheating in Buick Regal?

1. Thermostat failure: The coolant only circulates in a small loop without passing through the radiator for cooling. 2. Cooling fan not working: This could be due to the temperature control switch not activating or a malfunctioning coolant temperature sensor. 3. Water pump failure: The impeller may slip or get stuck, causing the belt to break. 4. Insufficient cooling medium: Low coolant level or radiator leakage. 5. Incorrect ignition timing and high oil pressure: The temperature gauge reading differs from the actual temperature. Solutions for overheating: 1. Touch the upper and lower radiator hoses to determine the issue: If there's a significant temperature difference between the hoses, the thermostat might not be working. If a replacement isn't immediately available, remove the thermostat temporarily as an emergency measure and replace it as soon as possible. 2. If the car overheats, do not turn off the engine immediately: Pistons, cylinders, and the crankshaft are in a state of high-temperature expansion, and shutting off the engine may cause soft metal to detach or even lead to cylinder seizure. The water pump also stops, halting coolant circulation while engine components remain hot, potentially causing damage. The correct approach is to turn the car's heater to maximum to help dissipate heat and open the hood to aid cooling. Wait until the coolant temperature returns to normal before turning off the engine. 3. If overheating occurs while driving, never pour cold water on the engine: This could crack the engine block. Also, avoid opening the radiator cap immediately to prevent scalding from hot coolant. The right method is to turn off the engine, wait about 20 minutes, then open the radiator cap and add coolant if needed.
15
4
Share

What causes the Kia K2 clutch to be hard to press?

This is a typical failure caused by the aging and deformation of the piston cup inside the clutch assembly. Replacing a set of piston cups will solve the issue. Regardless of the cause, it is best to have the vehicle inspected and repaired at a professional 4S shop or repair facility as soon as possible when such a failure occurs. Below is additional information: 1. Possible causes: The clutch master cylinder return spring is broken or stuck; The clutch pressure plate is faulty; The separation bearing seat and the first shaft sleeve are jammed; The clutch fork shaft and clutch housing are rusted. 2. Component wear and failure issues: If the issue is related to component wear or failure, replacement is necessary. This mainly involves the clutch friction disc, clutch pressure plate, or separation bearing failure. These components are consumable parts, and if they are faulty or severely worn, they can cause the clutch to become excessively heavy. In many cases, a clutch that is too hard or impossible to press is caused by these components.
18
5
Share

What's the reason if BMW 5 Series fails to start?

The following are the reasons why a BMW 5 Series may fail to start: 1. Check if the BMW 5 Series battery has power: It may be due to power loss caused by reasons such as leaving the headlights on for a long time or the battery's lifespan expiring. It is generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, DVD players, etc., can also cause vehicle circuit failures. Checking for a dead battery is simple; just press the horn. 2. Check if there is fuel: If the fuel gauge shows below the red line, the car naturally won't start. Also, pay attention to the quality of the fuel. During repairs, we once found water and mud in the fuel tank after opening it. Using such fuel will inevitably damage the car. Therefore, it is advised to refuel only at reputable gas stations. When traveling, you can use a gauze wrap on the fuel nozzle to filter out impurities. 3. BMW 5 Series lacking antifreeze: Some owners add water or inferior antifreeze to their cars, which can cause the entire cooling system to freeze in extremely cold winter conditions, leading to a cracked engine. This results in the car's water pump failing to operate, the car not starting, and damage to other engine components. 4. BMW 5 Series in the wrong gear: When starting the BMW 5 Series, the gear must be in P (Park) or N (Neutral). If it's in R (Reverse) or D (Drive), the car will not start.
12
5
Share

What car has three horizontal bars as the logo of Changan?

This is the logo of Changan Oushang. Below are the specific details about the Changan Oushang X7: 1. Body dimensions: The Changan Oushang X7 is a compact SUV, with a length of 4705mm, width of 1860mm, height of 1720mm, and a wheelbase of 2780mm. 2. Powertrain configuration: The Changan Oushang X7 is equipped with a 1.5-liter turbocharged four-cylinder engine across all variants. This engine delivers a maximum power of 131kW at 5500 rpm, and a peak torque of 265 Nm between 1450 and 4500 rpm.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.