What are the body dimensions of the Hongqi HS5?

1 Answers
BradyAnn
07/29/25 12:47pm
The body dimensions of the Hongqi HS5 are 4760 mm in length, 1907 mm in width, and 1700 mm in height, with a wheelbase of 2870 mm. In terms of power, the Hongqi HS5 is equipped with a 2.0T turbocharged engine, which delivers a maximum power of 165 kW and a maximum torque of 340 Nm. This is a domestically produced engine that complies with the China VI emission standards. For the transmission system, the engine is paired with a 6-speed automatic transmission. In terms of safety features, the Hongqi HS5 is equipped with an active braking system that can detect the distance between the vehicle and the car in front in real-time. When it determines that a collision is imminent, the vehicle will automatically apply the brakes to avoid or mitigate the impact of a collision.
Was this review help?
6
4
Share
More Forum Discussions

How to Compensate for Scratching an Unsold New Car?

After scratching an unsold new car, the 4S store has the right to claim damages for the act of scratching the new car, and may also request the assumption of other civil liabilities. Below are relevant details: 1. Legal Provisions: According to the relevant laws, "Property Law of the People's Republic of China": If real estate or movable property is damaged, the right holder may request repair, re-manufacturing, replacement, or restoration to the original condition. If property rights are infringed upon, causing damage to the right holder, the right holder may claim damages or request the assumption of other civil liabilities. 2. Special Circumstances: For non-commercial vehicles that cannot continue to be used, reasonable expenses for usual alternative transportation may be incurred. Beyond the above scope, courts generally take a conservative stance on depreciation losses, tending not to support them in principle. Of course, in a few extreme cases, appropriate compensation may be considered, but this must be handled cautiously and strictly controlled.
20
0
Share

What documents are needed to replace a vehicle license?

To replace a vehicle license, you need to bring the "Application Form for Replacement of Motor Vehicle License Plates and Certificates", the identity proof of the vehicle owner, the "Motor Vehicle Registration Certificate", and 2 vehicle photos (digital photos must be taken at the vehicle management office). The relevant details are as follows: 1. Conditions for replacement: If the motor vehicle license plate or vehicle license is lost, missing, or damaged, the vehicle owner should apply for a replacement at the vehicle management office of the registration location. 2. Processing time: The vehicle management office will review the submitted proofs and documents and retrieve the license plates or vehicle licenses that are not lost, missing, or damaged. The replacement vehicle license will be issued within one day from the date of acceptance. 3. Validity period: During the replacement of license plates, a temporary vehicle license plate with a validity period of no more than 15 days should be issued.
19
2
Share

What does 101W on the back of a tire represent?

Tire 101W meaning explanation: 101 indicates a maximum load capacity of 825KG, while W represents a speed rating of 270KM/H. The letter H in car tires denotes the tire's speed rating, which specifies the maximum speed at which the tire can carry its rated load under specified conditions. Below is a related introduction to tire replacement steps: 1. After parking and turning off the engine, engage the handbrake; 2. Place heavy objects in front of and behind the wheels to prevent sliding, and set up a triangular warning sign behind the vehicle; 3. Use a wrench to loosen the lug nuts of the tire to be replaced in a diagonal pattern; 4. Position the jack on the side where the tire needs to be replaced and lift the vehicle to a certain height; 5. Remove the lug nuts and take off the tire; 6. Install the spare or new tire and tighten the lug nuts diagonally; 7. Lower the vehicle by releasing the jack and ensure all nuts and bolts are securely tightened.
4
2
Share

What are the reasons for severe cabin bumpiness?

The reasons for severe cabin bumpiness are as follows: 1. Vibration of the plastic shell on the cabin lift roof: If the noise is caused by the vibration of the plastic shell on the cabin lift roof, this is a normal phenomenon. Simply adding some plastic foam inside can resolve the issue. 2. Aging of the buffer rubber pads on the gantry frame: When a truck has been used for a long time, the buffer rubber pads on the gantry frame may age, leading to noise when the truck drives on bumpy roads. In this case, the buffer rubber pads on the gantry frame need to be replaced. 3. Damage to the front shock absorber: If the front shock absorber or the plane bearing is damaged, it can also cause noise while driving. This situation requires professional inspection and repair at a repair shop or 4S store. 4. Severe wear of the front brake pads: If the front brake pads are severely worn, noise may occur during braking, which can then be transmitted to the cabin. In this case, the brake pads need to be replaced. 5. Severe tire wear: Severe tire wear can also cause noise while driving. In such cases, the tires should be replaced promptly.
5
3
Share

How to Remove the Tire Pressure Warning?

Tire pressure warning indicates uneven pressure among the four tires, requiring inflation check. If no puncture exists, driving briefly may auto-clear it or manually reset via button. Tire Pressure Monitoring System (TPMS) Light: The TPMS indicator is a yellow symbol featuring an irregular circle without top seal, four small spikes at the bottom, and an exclamation mark inside. Illumination signals abnormal tire pressure. Common causes of abnormal tire pressure include: Tire Pressure Deviation: The system typically triggers alerts when pressure falls below 1.8 bar or exceeds 3.0 bar, necessitating tire inspection and pressure adjustment. Unreset TPMS: Failure to reset the system after inflation retains outdated data, causing the warning light. Simply perform a TPMS reset to resolve. Faulty Pressure Sensor: Mounted internally and connected to the valve stem, these sensors may get damaged during impacts, triggering warnings. Damaged sensors require complete replacement.
15
2
Share

How to Legally Apply Stickers to a Car?

Not just any sticker can be applied; improper use of car stickers is illegal. Car stickers can showcase the owner's taste and enhance the vehicle's aesthetics, but they must be applied reasonably and legally. Specific regulations are as follows: 1. A standardized probationary sign must be displayed during the probationary period: According to Chinese law, the first 12 months after obtaining a driver's license is considered the probationary period. During this period, a standardized probationary sign must be affixed or hung at the rear of the vehicle. Failure to comply with this regulation will result in a fine of 20 yuan. Since the probationary sign is relatively large, care must be taken to ensure its placement does not obstruct the driver's view. 2. Color of car stickers: Chinese law permits modifications to the vehicle's body color, but certain colors are reserved for special vehicles, such as fire engine red, emergency vehicle yellow, and the white-and-blue combination for law enforcement vehicles. These colors cannot be used on ordinary vehicles.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.