What are the body dimensions of the GAC Trumpchi GS3?

How to Deal with Water Stains Left After Cleaning Car Windows?

The solutions for water stains left after cleaning car windows are: 1. Prepare clean water mixed with white vinegar, then wipe the windows with a cloth soaked in the solution; 2. Add salt and beer to clean water. The salt helps accelerate water evaporation, preventing water stains or other residues on the cleaned glass. Adding beer not only speeds up water evaporation but also forms a protective film after evaporation to prevent dust from sticking to the glass. The functions of car windows include: 1. Shielding from wind and rain, and reducing noise; 2. Minimizing wind resistance and improving airflow; 3. Protecting the safety of passengers. Maintenance tips for car windows are: 1. Use dedicated or suitable wiper blades and replace them timely; 2. Keep the windshield clean; 3. Use automotive-specific glass cleaner.

14

2

Share

What engine is equipped in the Haima M3?

Haima M3 is equipped with a 1.5L naturally aspirated engine. The function of the engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning and expanding the gas in a sealed cylinder, thereby pushing the piston to perform work. Taking the 2017 Haima M3 as an example, it is a compact car with body dimensions of: length 4553mm, width 1737mm, height 1495mm, and a wheelbase of 2600mm. The 2017 Haima M3 features a MacPherson strut independent suspension with a stabilizer bar at the front and an H-type torsion beam suspension at the rear. It is powered by a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, a maximum power of 82kW, and a maximum torque of 147Nm, paired with a 5-speed manual transmission.

15

0

Share

What is the standard pressure for car air conditioning?

The standard pressure for car air conditioning is approximately 1.5 to 2.0 MPa for the high pressure side and 0.15 to 0.35 MPa for the low pressure side when the compressor is running at 1500 to 2000 rpm. At idle speed, the high pressure may reach around 2.5 to 2.8 MPa. Methods for maintaining the air conditioning system include: 1. Regularly cleaning the air vents; 2. Timely maintenance of the air conditioning condenser; 3. Cleaning or replacing the air filter as needed. The functions of the air conditioning system are: 1. Filtering the air entering the cabin; 2. Absorbing moisture from the air; 3. Maintaining clean air to prevent bacterial growth; 4. Preventing window fogging; 5. Adjusting the cabin temperature.

5

2

Share

How to Use Hill Descent Control?

The method of using hill descent control is: 1. Before descending a slope, turn on the HDC switch, then release the brake and clutch; 2. Press the brake or accelerator to turn it off. The function of hill descent control is: By applying a brief braking force to the front axle of the car, it compensates for engine braking, thereby improving the controllability of the car when driving on steep slopes. Precautions for using hill descent control are: 1. Hill descent control must be set before use to ensure the driver focuses on driving. After setting the hill descent control, the driver should release all pedals to avoid interfering with its operation; 2. When descending a slope with hill descent control, the driver does not need to press any pedals. The car will automatically drive at a speed of about 8 km/h. During automatic driving, the driver only needs to steer the wheel properly.

10

2

Share

How many kilometers should the gasoline filter be replaced?

Gasoline filters should be replaced approximately every 40,000 kilometers. The replacement method for gasoline filters is as follows: 1. Release the residual pressure in the fuel system; 2. Remove the grounding wire near the gasoline filter; 3. Place a basin under the filter; 4. Pull out the fuel inlet pipe and then remove the adjacent fuel outlet pipe; 5. Remove the old gasoline filter for replacement. Precautions for replacing the gasoline filter include: 1. Ensure the overall sealing of the air filter and cabin air filter; 2. Use the gasoline grade specified by the vehicle manufacturer. The gasoline filter, also known as the fuel filter, functions to remove iron oxide, dust, and solid impurities contained in the fuel, prevent fuel system blockages, reduce mechanical wear, ensure stable engine operation, and improve reliability.

8

1

Share

Reasons for Transmission Shaft Oil Leakage?

There are several reasons for transmission shaft oil leakage: 1. Aging of oil seals. Like the engine and transmission, the transmission shaft is a mechanical transmission component that requires lubrication. Most oil leakage issues are caused by problems with the oil seals. 2. If the oil leakage is from the transmission shaft dust cover, it is mostly due to loose clips. Tightening the screws has little effect, and over time, oil leakage will still occur. To completely eliminate the oil leakage, the corresponding parts of the transmission shaft and transfer case need to be disassembled and reassembled properly. Below is additional information: 1. The transmission shaft is a crucial component in the automotive drivetrain that transmits power. Its function is to work together with the transmission and drive axle to transfer the engine's power to the wheels, generating driving force for the vehicle. 2. If oil leakage occurs, it is important to promptly take the vehicle to a repair shop for inspection.

7

5

Share

What are the body dimensions of the GAC Trumpchi GS3?

How to Deal with Water Stains Left After Cleaning Car Windows?

What engine is equipped in the Haima M3?

What is the standard pressure for car air conditioning?

How to Use Hill Descent Control?

How many kilometers should the gasoline filter be replaced?

Reasons for Transmission Shaft Oil Leakage?

What are the differences between the Sharan and the Touran?

What Are the Reasons for a Car Squeaking and Failing to Start?

What to Do If the Vehicle Fails OBD Inspection During Annual Inspection?

What to Do When the Key Cannot Be Pulled Out in P Gear?