What are the body dimensions of the Fumailai F7?

When Can a New Car Be Driven on the Highway?

A new car can be driven on the highway after traveling 5,000 kilometers. During the break-in period, the new car should avoid high-speed driving at speeds above 90 kilometers per hour. When the new car has traveled approximately 5,000 kilometers and is about to complete the break-in period, the owner can briefly run the engine at over 4,000 RPM to reduce carbon buildup and enhance engine performance. New car break-in considerations: 1. During the break-in period, avoid driving with a full load, as excessive weight increases the load on the engine and transmission, leading to higher engine output power and excessive wear on components; 2. Owners should avoid prolonged use of low gears, allowing each gear to undergo break-in. Automatic transmission cars eliminate the need for manual gear shift break-in; 3. Under good road conditions, the owner should accelerate continuously to allow the transmission to shift up smoothly, preventing insufficient break-in of high gears.

13

2

Share

What are the steps for a normal start of the 10th-generation Accord?

The steps for a normal start of the 10th-generation Accord are: 1. Press the start button once, and after the ACC light turns on, press the start button again. At this point, the one-touch start button will turn green, and the vehicle will perform a self-check; 2. After the vehicle completes the self-check, press the brake and press the one-touch start button once more to start the vehicle. The 10th-generation Accord is a mid-size car launched by GAC Honda, with dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm. The 10th-generation Accord is equipped with a 1.5T turbocharged engine and a 2.0L naturally aspirated engine, with maximum horsepower of 194ps and 146ps, and maximum torque of 260nm and 175nm, respectively.

2

3

Share

Can You Park in Neutral (N) Gear for a Long Time?

You can park in Neutral (N) gear for a long time, but you must also engage the handbrake to prevent the car from rolling. From the perspective of automatic transmission structure, both N gear and P (Park) gear are suitable for long-term parking. Before parking, you should first bring the car to a complete stop, shift from D (Drive) gear to N gear, then firmly engage the handbrake, and turn off the engine. After turning off the engine, do not immediately cut the power; instead, move the gear lever to N gear, and finally, press the brake pedal to shift the gear lever into P gear to complete parking. After parking an automatic transmission car, carefully observe the terrain of the parking spot. If possible, park the car on a relatively flat surface. If conditions do not permit and you have to park on a slope, in addition to engaging the handbrake and shifting into P gear, you should also use stones to block the wheels to minimize the risk of the car rolling.

8

1

Share

How to Modify a Car Antenna into a Shark Fin?

Methods for modifying a car antenna into a shark fin antenna: 1. Wrap a circle of 3M tape around the shark fin antenna, ensuring it is as flat as possible. 2. Remove the light on the rear seat of the car and take off the antenna base. 3. Determine and mark the position where the shark fin antenna should be installed. 4. Apply a circle of adhesive inside the marked position, then peel off the tape on the shark fin antenna and align it for attachment. 5. After installing the shark fin, secure it with tape and remove the tape after 24 hours. The following are the functions of a car shark fin: 1. Preventing rear-end collisions. When braking, the tail lights illuminate to alert following cars to slow down. The shark fin is designed with a flashing light effect for better warning, effectively preventing rear-end collisions. 2. Spoiler effect. Air resistance increases with speed while driving. The shark fin, based on aerodynamic principles, helps reduce the drag coefficient. 3. Static electricity removal. In winter, static electricity is generated. Installing a shark fin on the car roof can release the static electricity from the car. During thunderstorms, it enhances driving safety.

17

3

Share

What kind of engine oil should be used for the Buick Excelle?

For the Buick Excelle, the recommended engine oil is the GM genuine 5W-30SL. Here are some important considerations regarding engine oil: 1. Gasoline engine oil should not be used as a substitute for diesel engine oil, primarily to avoid accelerating wear in diesel engines. Since there are differences in the application of gasoline and diesel engine oils, substitution is only permissible if the manufacturer provides instructions for such use or if the oil is labeled as suitable for both gasoline and diesel engines, or if it falls within the specified grade range. 2. Single-grade and multi-grade oils should not be mixed. 3. Different brands of the same type of oil can be temporarily mixed, but long-term mixing should be avoided. However, it is important to note that oils of different brands and specifications should never be mixed. This is because different oils contain varying additive compositions, and mixing them can easily lead to the formation of sediments, which are detrimental to engine lubrication. 4. When using engine oil, it is essential to regularly check both the quality and the quantity of the oil in use. The crankcase must have sufficient oil to ensure the engine operates in a proper lubrication state.

4

1

Share

When will the China VI policy be implemented?

The China VI policy is divided into two standards, each with its own implementation time, respectively: 1. China VI a: On July 1, 2020, light-duty vehicles will be required to enforce the China VI a emission standard. 2. China VI b: On July 1, 2023, light-duty vehicles will be required to enforce the China VI b emission standard. However, many provinces and cities have already implemented it ahead of schedule, and the implementation time may vary according to local regulations: Guangzhou: Light-duty vehicles will implement China VI from January 1, 2019. Jiangsu: All gasoline supplied will meet China VI standards starting from October 1, 2018. Guangdong: China VI diesel has been on the market since July 1, 2019. Shandong: The province will implement the China VI emission standard for motor vehicles from July 1, 2019. Shenzhen: China VI will be fully implemented from January 2019, and fuel vehicles with emissions below this standard will be restricted from sale, purchase, and road use.

9

2

Share

What are the body dimensions of the Fumailai F7?

When Can a New Car Be Driven on the Highway?

What are the steps for a normal start of the 10th-generation Accord?

Can You Park in Neutral (N) Gear for a Long Time?

How to Modify a Car Antenna into a Shark Fin?

What kind of engine oil should be used for the Buick Excelle?

When will the China VI policy be implemented?

What to Do If the Car ETC Falls Off?

What are the symptoms of a damaged pressure plate?

How many liters of engine oil does the Audi Q5 2.0T require?

How to Adjust the Clock on Chery Tiggo?