What are the body dimensions of the Dongfeng Nissan Kicks?

1 Answers
Michelle
07/29/25 6:17pm
The Dongfeng Nissan Kicks has a length, width, and height of 4312mm/1760mm/1613mm, which are official data. The length of the Dongfeng Nissan Kicks refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The naturally aspirated engine of the Dongfeng Nissan Kicks has a maximum power of 90kW and a maximum torque of 143 Nm. This engine reaches its maximum power at 6300 rpm and its maximum torque at 4400 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a continuously variable transmission (CVT). There are national regulations regarding vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
Was this review help?
14
2
Share
More Forum Discussions

Can I still drive if my car has 12 points deducted?

A driver's license with all 12 points deducted cannot be used for driving. First, let's correct a common misconception: vehicles cannot have points deducted; only driver's licenses can. In other words, points are deducted from the license holder, not the vehicle. If a driver's license has all 12 points deducted, it will be revoked, and the driver must retake the driving test. This test is commonly referred to as Subject 1. If a driver accumulates 12 points twice within a scoring cycle (12 months), in addition to taking Subject 1, they must also take Subject 3 (the road test). If a driver continues to drive with all 12 points deducted and is caught by traffic police, the vehicle will be impounded. The traffic management department of the public security authority may impose a fine ranging from 200 to 2,000 yuan and may also detain the driver for up to 15 days. For specific details, refer to Articles 23, 24, 25, 26, 27, and 28 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China.'
11
4
Share

What are the differences between the Tayron 330 and 380?

The differences between the Tayron 330 and 380 lie in their engines: The Tayron 330 model is equipped with a low-power version of the 2.0-liter turbocharged engine, delivering 186 horsepower and a maximum torque of 320 Nm; The Tayron 380 model uses a high-power version of the 2.0-liter turbocharged engine, producing 220 horsepower and a maximum torque of 350 Nm. The low-power engine in the Tayron 330 features hybrid injection technology and utilizes an aluminum cylinder head with an iron cylinder block. The high-power engine in the Tayron 380 employs direct fuel injection technology, also with an aluminum cylinder head and iron cylinder block, achieving a maximum power of 162 kW and a maximum torque of 350 Nm. It is paired with Volkswagen's DQ500 7-speed wet dual-clutch transmission.
16
3
Share

What is the relationship between Denza Auto and Mercedes-Benz?

Denza Auto and Mercedes-Benz have an inclusion relationship, with Denza Auto essentially being a sub-brand of Mercedes-Benz. Denza Auto is a domestic high-end electric vehicle brand, jointly established by China's BYD Auto and Daimler AG, the parent company of Mercedes-Benz. The Daimler Group provides channel and service support for Denza Auto. As a joint venture automotive brand, Denza Auto's headquarters is located in Shenzhen. Denza Auto has one electric vehicle model, which is positioned as a mid-size car and is also named Denza. It comes in two versions: a 117-horsepower model and a 184-horsepower model. The chassis, body design, motor, electronic control, and battery of Denza Auto all utilize materials and technologies from both BYD and Daimler.
17
5
Share

What engine does the BYD F0 use?

BYD F0 is equipped with a 1.0-liter three-cylinder naturally aspirated engine across all models. Here are the detailed specifications of the BYD F0: 1. The BYD F0 is a microcar produced by BYD, which gained immense popularity among consumers upon its initial launch. Its exterior design is compact and adorable. 2. The 1.0-liter naturally aspirated three-cylinder engine delivers 68 horsepower and a maximum torque of 90 Nm. The engine reaches its peak power at 6,000 rpm and achieves maximum torque between 4,000 to 4,500 rpm. It features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. 3. The engine is paired with either a 5-speed manual transmission or a 5-speed AMT (Automated Manual Transmission). The AMT, also known as a mechanical automatic transmission, employs older technology. Its structure is nearly identical to that of a manual transmission, with the addition of a control mechanism. This mechanism manages gear shifts and controls the engagement and disengagement of the clutch.
15
3
Share

Does the Teana have models with a V6 engine?

The Teana has models equipped with a V6 engine. The Teana 2.5L, 3.5L, and the entire Duke series all feature V6 engines. The V6 engine's V-shaped six-cylinder arrangement utilizes a symmetrical structure to cancel out noise and vibration during operation. Additionally, it incorporates technologies such as an automatic balance high-rigidity engine block, aerospace-grade ultra-low friction technology, and CVTC (Continuous Variable Valve Timing Intelligent Control) to enhance comfort and fuel efficiency alongside performance. The dimensions of this model are 4930mm in length, 1795mm in width, and 1475mm in height, with a wheelbase of 2853mm.
18
5
Share

Why is the Teana called Altima?

The reason the Teana is called Altima is: Altima is the name for the American version of the Teana. The Teana is a mid-size sedan under the Nissan brand, with body dimensions of 4910mm in length, 1850mm in width, 1447mm in height, and a wheelbase of 2825mm. The interior design of the Teana emphasizes simplicity. This car is equipped with two engines, a 2.0L and a 2.0T, both paired with a CVT continuously variable transmission. The 2.0L version engine has a maximum output power of 117 kW, a maximum torque of 208 N·m, and a top speed of 200 km/h. The 2.0T version engine has a maximum output power of 185 kW, a maximum torque of 380 N·m, and a top speed of 210 km/h.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.