What are the body dimensions of the Discovery Sport?

2 Answers
JoyFitz
07/29/25 12:30am
The body dimensions of the Discovery Sport are: length 4597 mm, width 1904 mm, height 1727 mm, with a wheelbase of 2741 mm. The Discovery Sport is a mid-size SUV. Taking the Discovery Sport 2020 200PS Family Edition as an example, it has a fuel tank capacity of 67 liters, a luggage compartment volume of 780 to 1574 liters, and a curb weight of 2025 kg. The Discovery Sport 2020 200PS Family Edition is equipped with a 2.0T turbocharged engine, with a maximum power of 147 kW, a maximum torque of 320 Nm, and a maximum torque speed range of 1200 to 4000 rpm.
Was this review help?
5
5
Share
LilahFitz
08/12/25 4:44am
As a frequent driver of the Discovery Sport, I find its body dimensions quite practical: it's approximately 4,571 mm long, 1,894 mm wide (about 1.9 meters excluding mirrors), 1,727 mm tall, with a wheelbase of 2,741 mm. For daily city commuting, this size makes parking convenient—especially useful near my home where parking spaces are narrow; just a bit of attention to the track width does the trick. On weekends when taking the whole family out, the deep trunk easily fits two large suitcases and my kid’s toy car, while the spacious rear seats ensure my parents don’t have to curl up their legs. Compared to other SUVs in its class, it’s not the most compact but handles nimbly, and wind resistance is well-controlled at high speeds. Overall, it strikes a balanced point for family use—practical without feeling bulky.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

How to Activate the One-Touch Power Window Function in the Outlander?

Outlander one-touch power window activation steps: 1. Open the window (one-touch down). Press the button to the first position, then release when reaching the desired position; press slightly harder to the second position, and the window will automatically descend. 2. Close the window (one-touch up). Pull the button to the first position, then release when reaching the desired position. Pull harder to the second position, and the window will automatically rise completely. 3. In addition to door handle controls, you can also use the car key: press and hold the lock button for 3 seconds to automatically raise all four windows; press and hold the unlock button for 3 seconds to automatically lower all windows.
7
0
Share

Can Mineral Oil Be Changed Once a Year?

Mineral oil cannot be changed once a year. Generally, the replacement cycle for mineral oil is 5,000 kilometers or six months. It is recommended that car owners perform vehicle maintenance in advance, change the engine oil, and better protect the engine. Below is a related introduction to engine oil: 1. Classification: Engine oil is divided into three types: full synthetic oil, semi-synthetic oil, and mineral oil. 2. Mineral oil: The base oil of mineral oil is refined from petroleum, with irregular molecular sizes and shapes. It is the lowest grade among engine oil classifications, and its performance characteristics and service life are inferior to those of semi-synthetic and full synthetic oils.
1
5
Share

Can I Buy a Car in One Place and Register It in Another?

It is possible to buy a car in one place and register it in another. Below is the relevant information about changing license plates in a different location: 1. Requirements: The owner of the vehicle must have their residence transferred into the jurisdiction of the local vehicle management office, and when applying for the transfer of vehicle ownership, the current owner must also have their residence transferred into the jurisdiction of the local vehicle management office. 2. Documents Required: For transfer registration, provide proof and documentation of the transfer of vehicle ownership, the vehicle registration certificate, the vehicle file, the original and a copy of the owner's identity proof, and for owners transferring their residence into the city, provide legal proof and documentation.
7
1
Share

What is the difference between hydraulic brakes and disc brakes?

The differences between hydraulic brakes and disc brakes are as follows: 1. Different brake lever structures: The lever of a mechanical disc brake operates by pulling a cable, and you can see the cable inside. In contrast, the lever of a hydraulic disc brake operates by compression and is enclosed. 2. Different transmission methods: Hydraulic brakes use the pressure of liquid oil to drive the hydraulic transmission device—the piston. The piston is pushed by the pressure, thereby squeezing the connected brake pads to clamp the brake disc, achieving the braking effect. This is done through hydraulic disc brakes, which use hydraulic transmission for braking. 3. Different replacement methods: Hydraulic brakes require oil changes, but they won't function without oil. Disc brakes require brake pad replacements.
8
0
Share

How is ETC charged?

ETC charging method: The ETC gantry charges the mainline fees in segments, while the entrance/exit toll stations collect the ramp fees on behalf. Here are some related introductions about ETC: 1. Meaning: ETC is the abbreviation of Electronic-Toll-Collection, which means Electronic Toll Collection System. 2. Function: For vehicles equipped with ETC devices, when passing through toll stations, the onboard device will achieve vehicle identification, information writing, and automatically deduct corresponding funds from the pre-bound IC card or bank account, realizing fast passage. It is particularly suitable for use on highways or in busy bridge and tunnel environments.
3
3
Share

What is the GM12-NR engine technology?

GM12-NR engine is the N55B30A model, which adopts a dual overhead camshaft variable valve timing system with Valvetronic electronic valve. Here are the relevant introductions about automotive engines: 1. Engine layout: The engine is the most important part of a car, and its arrangement form has a significant impact on the car's performance. The layout positions of car engines can be simply divided into front-mounted, mid-mounted, and rear-mounted. 2. Technical features: Special materials and specially processed plastic intake manifolds are used to replace traditional metal intake manifolds, achieving not only a lightweight effect but also effectively reducing the resistance of the intake manifold wall, improving intake efficiency, and increasing engine power.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.