What are the body dimensions of the Cruze?

2 Answers
VonAiden
07/29/25 1:51am
The body dimensions of the Cruze are 4666mm in length, 1807mm in width, and 1460mm in height, which are official data. The length of the Cruze refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the vehicle support plane. The Cruze is equipped with a 1.5L naturally aspirated engine and a 1.4T turbocharged engine, with maximum power outputs of 114 horsepower and 150 horsepower respectively. The transmission system for the 1.5L engine includes a 6-speed automatic transmission and a 6-speed manual transmission, while the 1.4T model is paired with a 7-speed dual-clutch transmission. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle excludes side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that in the national standard, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
Was this review help?
3
5
Share
Menezes
08/12/25 5:54am
I've driven a Cruze for several years, and its body dimensions are quite practical, measuring approximately 4.66 meters in length, 1.8 meters in width, and 1.46 meters in height. This size makes it very convenient for city driving, with turns not being too difficult. While parking in some tight spots requires caution, it's much easier than handling larger vehicles. The interior space is well-designed, with a wheelbase of 2.7 meters, so the rear seats aren't cramped, and there's enough legroom to stretch out, making family outings comfortable. The trunk capacity is around 400 liters, which is sufficient for several suitcases, whether for travel or shopping. Additionally, the lower body height helps reduce wind resistance, contributing to more fuel-efficient performance. Overall, I find this a very practical size—neither as cramped as smaller cars nor as bulky as SUVs, providing a stable and reassuring drive on highways.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

How much fuel does the Buick Envision require?

The fuel tank capacity of the Buick Envision is 66 liters. The manufacturer recommends using 92-octane gasoline for the two-wheel-drive version and 95-octane gasoline for the four-wheel-drive version. Fuel tanks can be divided into two types: open and closed. The fuel tank must have sufficient volume. To maintain fuel cleanliness, the tank should have a sealed cover plate equipped with an air filter. The bottom of the fuel tank should be at least 150mm above the ground, and special attention should be paid to the anti-corrosion treatment of the inner surface of the tank. Below is some relevant information about Buick: 1. The Buick Envision is a model under SAIC General Motors, with dimensions of 4686mm in length, 1839mm in width, and 1660mm in height, and a wheelbase of 2750mm. 2. In terms of appearance, the Envision features an intelligent drag-reducing grille, aluminum roof rails, newly designed chrome dual exhaust pipes, 19-inch multi-spoke aluminum alloy wheels, and multi-function exterior rearview mirrors.
3
5
Share

Which Button is the Defogger in the Car?

The defogger button in the car is shaped like glass, with a fan shape indicating the front windshield defroster and a rectangle indicating the rear windshield defroster. Solutions for defogging include: 1. Using the air conditioning to defog by turning on the front window defogging mode, increasing the fan speed, and lowering the temperature; 2. Activating the one-touch defogging function; 3. Promoting air convection by opening windows to reduce the temperature difference inside and outside the car, thereby weakening the conditions for fog formation; 4. In winter, using the air conditioning's hot air to defog—avoid turning on the air conditioning immediately after starting the car. Wait a few minutes for the engine to warm up and the water temperature to rise, then start heating, increase the air volume, and activate the front window defogging mode; 5. Spraying defogger evenly on the glass surface and wiping it clean with a dry towel; 6. Making a DIY defogger by mixing dish soap and water in a 1:6 ratio in a bottle and spraying it before travel. The effect is comparable to commercial defoggers, though the durability is slightly inferior.
6
3
Share

Is the Headlight the Same as the High Beam?

Car headlights, also known as car front lights or car LED daytime running lights, include high beams, low beams, and turn signals. High Beam: The high beam should only be used when there is no other surrounding light. It is suitable for driving at night on highways without streetlights or in rural areas without illumination, as it expands the field of vision. However, when encountering oncoming traffic, it is necessary to switch to the low beam for safety and courtesy. Low Beam: The low beam must be turned on when driving in areas without streetlights at night, during dusk when it is relatively dark, or at dawn when light is just appearing. In conditions of heavy fog, snow, or rain that impair visibility, the low beam should also be used even during the day. Additionally, in areas where the lighting is insufficient despite the presence of illumination, the low beam should be activated. Turn Signal: The primary function of the turn signal is to indicate to other vehicles and pedestrians when the car is about to turn, thereby alerting others to pay attention. In some cases, the turn signal can also serve as auxiliary lighting in narrow spaces, helping the driver to observe obstacles on either side.
20
1
Share

What Causes the Squeaking Noise When Braking at Low Speed in Golf 6?

Golf 6 produces a squeaking noise when braking at low speed because the brake pads are severely worn, which is an alarm signal indicating that they are about to lose their braking effect. Brake pads usually have some hard metal debris at the bottom. When these debris are ground, they produce a hissing sound of metal friction. Here is more information about car brake pads: 1. The effectiveness of braking largely depends on the condition of the brake pads. Therefore, checking whether the wear level of the brake pads is normal is crucial for ensuring braking performance. 2. Brake pads (brake-lining) are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure the temperature distribution during the coating process and guarantee quality. 3. Under normal driving conditions, the brake pads should be inspected every 5,000 kilometers. Not only should the remaining thickness be checked, but also the wear state of the pads, whether the wear on both sides is even, and whether the retraction is smooth. Any abnormal situation must be addressed immediately.
14
5
Share

Does a Leaking Windshield Require Glass Removal?

No, a leaking windshield does not require glass removal. Relevant details are as follows: Tools needed for leak repair: glass adhesive, pry card, cloth, and clean water. Repair steps: If water seeps in under the windshield, remove the wiper arms and vent cover, clean the joint area with water and a cloth to remove dirt and debris, then blow it dry with an air gun. Apply glass adhesive to the joint. If the leak is at the top, clean the surrounding area and apply glass adhesive. Alternatively, use sealing tape. Note: If the windshield cracks while driving, reduce speed, exit the lane as soon as possible, stay calm, avoid sudden steering, and minimize braking. Solutions for a leaking windshield: Leaks without glass breakage are usually caused by damaged seals, adhesive, or corroded metal frames. Remove the windshield, clean off old sealant, repair damaged areas, and reinstall the windshield with new sealant. Ensure waterproofing; avoid driving until the sealant fully dries. When replacing glass, ensure proper sealing. If leaks occur, clean the upper edge of the glass, dry it thoroughly, and apply glass adhesive. Avoid washing the car for three days after sealing. If leaks persist, sand the area clean and apply white glass adhesive. If unresolved, replace the glass and ensure ample sealant is used during installation.
9
3
Share

What are the symptoms of a malfunctioning ignition coil in a Mitsubishi Pajero?

The symptoms of a malfunctioning ignition coil in a Mitsubishi Pajero are: 1. Significant body vibration when idling; 2. During driving, noticeable body vibration when the engine speed is below 2500 rpm, accompanied by weak acceleration, with the vibration disappearing once the speed exceeds 2500 rpm; 3. Upon opening the engine hood and observing the running engine, obvious engine vibration can be noticed. Taking the 2011 Mitsubishi Pajero as an example, it is a mid-to-large-sized SUV with body dimensions of: length 4830mm, width 1895mm, height 1885mm, a wheelbase of 2780mm, a minimum ground clearance of 219mm, and a body weight of 2120kg.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.