···
Log in / Register

What are the body dimensions of the Chery Tiggo 3?

4 Answers
AbigailLynn
08/31/25 5:17am

Chery Tiggo 3 body dimensions are 4420mm1760mm1670mm, with a wheelbase of 2510mm. Below are the detailed specifications of the Chery Tiggo 3: 1. Vehicle Positioning: The Chery Tiggo 3 is a compact SUV under the Chery brand, with a minimum ground clearance of 190mm and a curb weight of 1358kg. 2. Powertrain: The Chery Tiggo 3 is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 116PS, a maximum torque of 143Nm, and a maximum power output of 85kW. The engine reaches its maximum power at 6150rpm and its maximum torque at 4000rpm, paired with a 5-speed manual transmission.

Was this review help?
14
3
Share
CameronLynn
09/12/25 8:32am

My friend drives a Chery Tiggo 3, and its dimensions are very practical. The total length is approximately 4420 mm, width 1760 mm, height 1670 mm, and wheelbase 2510 mm. This car is easy to park in the city, and its height allows it to enter underground garages without any issues. The width provides spacious seating, and the rear seats are comfortable for two people without feeling cramped. For road trips, the trunk is large enough to hold luggage and even a small fridge. The wheelbase ensures comfortable long-distance rides without fatigue, and the minimum ground clearance of about 190 mm prevents the chassis from scraping on rough roads. Its moderate size makes it more fuel-efficient and easier to handle compared to larger SUVs, offering flexibility and economy for daily commutes. It’s ideal for small families or singles, with strong practicality.

Was this review help?
19
4
Share
Expand All
McLydia
10/27/25 2:33am

As a car enthusiast, I know the dimensions of the Tiggo 3 like the back of my hand: length 4420mm, width 1760mm, height 1670mm, and wheelbase 2510mm. These parameters position it as a compact SUV, offering agile handling and a small turning radius for urban driving. The wide body provides ample lateral space, while the height enhances visibility and safety. The long wheelbase ensures sufficient rear legroom, and the 190mm ground clearance delivers good off-road capability. Compared to peers like the Haval H2, it's slightly shorter but more practical inside. The body design balances fuel efficiency with low wind resistance. It offers stable driving with minimal body roll and excellent parking convenience, making it a great choice for a family SUV.

Was this review help?
6
2
Share
Expand All
GiannaFitz
12/10/25 2:49am

I prioritize space when choosing a car, and the Tiggo 3's dimensions fit my needs perfectly. It's 4420mm long, 1760mm wide, and 1670mm tall, with a 2510mm wheelbase. The width comfortably accommodates three passengers in the rear without feeling cramped, while the height ensures ample headroom. The wheelbase contributes to a comfortable rear seating experience. Its size makes parking in the city convenient—neither too long nor too short—and the trunk can easily handle large items, making it practical for family use. The high ground clearance handles bumpy roads with ease, and the intelligent body design ensures fuel efficiency and economy.

Was this review help?
8
1
Share
Expand All
More Forum Discussions

How to Deal with Frost on the Windshield?

Here are the methods to handle frost on the windshield: 1. Open the window: Frost forms due to the temperature difference between the cold outside and warm inside. In most cases, especially when the car is full of passengers, the temperature inside is higher, causing frost to form quickly. Opening the window for ventilation allows air to circulate between the inside and outside, reducing frost on the windshield. 2. Turn on the heater: When the vehicle's coolant temperature rises sufficiently, you can turn on the heater and direct the warm air toward the windshield while activating the external air circulation. This helps minimize the temperature difference between the inside and outside of the windshield, effectively removing frost. 3. Wipe with a towel: In winter, after the car has been parked outside overnight, the windshield is often covered with frost. The most effective solution in this case is to wipe and clear the frost with a clean towel. 4. Apply professional anti-fog spray: Professional anti-fog sprays can be directly applied to the windshield, forming a transparent protective film that effectively prevents moisture from condensing on the glass. Typically, one application of such a spray can last for about a week.
19
1
Share

What Causes Occasional Idle Shaking?

Severe engine carbon buildup, ignition system issues, unstable oil pressure, aging engine components, etc. Below are three main causes of idle shaking: 1. Severe engine carbon buildup - This leads to poor engine performance, increased fuel consumption, and even starting difficulties, potentially causing significant long-term damage to the vehicle. 2. Ignition system problems - These cause unstable engine operation, resulting in deteriorated acceleration performance, reduced power output, and poorer fuel economy. 3. Unstable oil pressure - Multiple factors can cause this, including insufficient engine oil, dirty oil, thinned oil, oil pipe leaks, oil pump failure, or excessive wear of pump components.
13
3
Share

How to Solve Excessive Engine Noise?

Engine noise is a common issue that can arise from various sources. Below are the causes and solutions for excessive engine noise: 1. The vehicle engine itself is a primary source of noise, with noise levels varying according to engine speed. Solution: Installing high-quality sound-absorbing foam materials under the engine hood can effectively reduce vibrations caused by the hood and absorb a significant amount of noise, yielding noticeable results. 2. Leaks in the intake or exhaust systems can cause noise. When starting the engine, escaping gases from these leaks create vibrations and noise. Solution: Inspect the intake and exhaust systems and replace any faulty components, such as the exhaust pipe, to eliminate the noise. 3. Tire noise occurs during high-speed driving due to friction between the tires and the road surface. The severity depends on road and vehicle conditions—worse roads produce louder noise, and asphalt versus concrete surfaces also make a difference. Solution: Tire noise is structural noise caused mainly by vibrations. The most effective solution is vibration damping. Adding damping plates along with sound-absorbing mats can significantly reduce road and tire noise. 4. Wind noise happens when the pressure of oncoming wind exceeds the sealing resistance of car doors at high speeds, increasing with velocity. Solution: Install or replace door seals, as rubber seals degrade over time, reducing their noise insulation and sealing effectiveness.
4
0
Share

What are the gear shifting requirements and passing standards for Subject 3 driving test?

Here are the introduction regarding gear shifting requirements and penalty items for Subject 3 test: Gear shifting requirements: Accurate and smooth gear shifting, with appropriate speed matching corresponding gear. Penalty items: (1) Wrong gear selection during startup or driving without timely correction, deduct 10 points; (2) Prolonged mismatch between gear and speed causing excessively high or low engine RPM, deduct 100 points; (3) Looking down at gearshift or failing to engage gear twice consecutively while driving, deduct 100 points; (4) Gear grinding during shifting, deduct 10 points; (5) Failure to smoothly shift up or down as instructed, deduct 100 points;
13
2
Share

What is the normal tire pressure for the Baojun 560?

The normal tire pressure range for the Baojun 560 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. The Baojun 560's tire pressure monitoring data is displayed on the dashboard's LCD screen. The driver can switch to the tire pressure monitoring system display page by rotating the knob on the dashboard left or right, which will show the air pressure of each tire. The Baojun 560 is equipped with a tire pressure monitoring system that automatically monitors the tire pressure in real-time while driving and alerts the driver to tire leaks or low pressure to ensure driving safety. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged while driving, the tire pressure warning light will come on. For sensor damage, the only solution is to replace it with a new part.
19
1
Share

How to Check the Total Mileage on the 10th Generation Accord?

The 10th generation Accord's dashboard features a speedometer on the right and a tachometer on the left. The number before "km" displayed between the speedometer and tachometer indicates the total mileage. Below are the relevant details: 1. The Accord's dashboard is equipped with a maintenance reminder light. When the odometer reaches 9600km-12000km and the ignition is turned on, the maintenance light will illuminate for 2 seconds. If the owner fails to perform maintenance after exceeding 12000km, the maintenance light will flash continuously to remind the owner to service the vehicle promptly. 2. After maintenance, the odometer needs to be reset to zero. Turn on the ignition and press the reset button on the dashboard until the trip meter displays "0". 3. The Accord's dashboard does not have a dedicated maintenance light, but the "MAINTENANCE REQUIRED" indicator on the dashboard serves as a reminder. When the mileage approaches 12000km, this indicator will change from green to yellow. If maintenance is not performed after exceeding 12000km, the indicator will turn from yellow to red.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.