What are the body dimensions of the Cadillac XT4?

2 Answers
RyleeDella
07/24/25 6:49pm
Cadillac XT4 body dimensions: length is 4600 mm, width is 1881 mm, height is 1627 mm, and the wheelbase is 2779 mm. The Cadillac XT4 is equipped with a 2.0-liter turbocharged engine across all models, with a maximum power output of 177 kW and a maximum torque of 350 Nm. This engine features a variable valve management system and direct fuel injection, and it uses an aluminum alloy cylinder head and block. The engine is paired with a 9-speed automatic transmission (9AT), which provides smooth shifting and excellent reliability and durability. The front suspension of the Cadillac XT4 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
Was this review help?
8
3
Share
StJaxon
08/11/25 10:27am
To be honest, I’ve also thought a lot about SUV dimensions, especially since parking in the city is so tough. The Cadillac XT4 looks pretty sharp, and here are the measurements: it’s 4602mm long, roughly 4.6 meters; 1881mm wide, so even with my 1.8m frame, there’s plenty of room on either side; 1627mm tall, and my daughter can reach the roof on tiptoe; the wheelbase is 2779mm, nearly 10cm longer than the GLA in its class, so the back seat fits a baby seat and still has space for my fishing gear. When I moved last time, I tried folding the rear seats completely flat—it could fit five or six 28-inch suitcases upright. But the biggest surprise is the tight turning radius; it handles 90-degree turns in old neighborhoods in one go, no need to maneuver back and forth like a boat.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

How to Reset the Tire Pressure on a Touareg?

Touareg tire pressure reset steps: First, press and hold the SET button until you hear a beep, which indicates a successful reset. If the tire pressure warning light remains yellow, it means there is indeed a fault with the tire, and you need to visit a 4S shop for inspection. What to do if the tire pressure is insufficient: If no visible damage is found on the car's tire, you can directly inflate it to the normal tire pressure and then reset the tire pressure system. If a puncture is found upon inspecting the car tire, you should promptly drive to a car repair shop to have the tire patched before reinflating it. If the tire pressure warning appears again some time after inflation but there is no puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. How the tire pressure monitoring system works: It uses pressure sensors installed inside the tires to measure the tire pressure and wireless transmitters to send the pressure information from inside the tire to a central receiver module.
1
2
Share

Where is the car air conditioning expansion valve located?

The car air conditioning expansion valve is generally located at the condenser outlet. More related information is as follows: 1. Introduction to the thermal expansion valve: The thermal expansion valve, also known as the throttle valve, is one of the four major components in the car air conditioning refrigeration system (evaporator, compressor, condenser, and expansion valve). It senses the superheat of the refrigerant vapor at the evaporator outlet through a temperature-sensing element to adjust the opening of the expansion valve, thereby controlling the flow of liquid refrigerant entering the evaporator. 2. Thermal expansion valve balance: According to the balance method of the thermal expansion valve, it is divided into internal balance type and external balance type: The working principle of the internal balance expansion valve and the external balance expansion valve is basically the same. The difference is that the diaphragm of the internal balance expansion valve senses the evaporator inlet pressure. When the evaporator pressure drop is too large, it will reduce the superheat sensed by the power head, resulting in insufficient valve opening. The diaphragm of the external balance expansion valve senses the evaporator outlet pressure, avoiding the influence of the evaporator pressure drop on the valve opening and overcoming the shortcomings of the internal balance valve.
13
2
Share

What brand of spark plug is fomoco?

fomoco is a spark plug produced by Ford Focus. What types of spark plugs are there: Main types of spark plugs include: standard spark plugs, extended tip spark plugs, electrode spark plugs, seat spark plugs, pole spark plugs, and surface gap spark plugs. Replacement cycle for spark plugs: Under normal maintenance conditions, replacement is recommended after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine. It is advisable to follow the user manual. You can refer to the following standards for maintenance replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Working principle of spark plugs: Under high voltage, the air between the center electrode and the side electrode of the spark plug will rapidly ionize, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain value, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties and forming a discharge channel, resulting in a 'breakdown' phenomenon. At this point, the gas forms a luminous body, known as a 'spark.' Along with the thermal expansion, a 'snapping' sound is also produced. The temperature of this electric spark can reach as high as 2,000-3,000°C, which is sufficient to ignite the air-fuel mixture in the combustion chamber of the cylinder.
12
1
Share

What is the fuel consumption of the Chery GX?

Chery GX's fuel consumption is approximately 6.9 liters per 100 kilometers. Below is a detailed introduction about it: 1. Powertrain: It is equipped with a 1.5T turbocharged engine, which has a thermal efficiency of up to 37.1%. The maximum power output is 108 kW, and the peak torque reaches 210 Nm. The engine is paired with a CVT transmission that can simulate 9-speed shifts. 2. Exterior design: From the side view, the blackened A, B, C, and D pillars feature a floating roof design, making it more stylish. The taillight design is quite distinctive, resembling a crab claw.
12
0
Share

What are the correct steps for starting the car in Subject 3?

Here are the steps for starting in Subject 3: 1. Upon hearing "Please start," press the clutch pedal with your left foot and shift into first gear. 2. Turn on the left turn signal for more than 3 seconds, check the left rearview mirror, and honk after confirming safety. 3. Release the handbrake, lift the clutch pedal with your left foot to the semi-engaged state, release the brake with your right foot, and accelerate to around 1000 RPM, ensuring no rolling occurs. 4. After starting, release the clutch pedal. Once the speed increases, press the clutch pedal, accelerate, shift from first to second gear, and enter the left lane. Here are the precautions for starting in Subject 3: 1. When lifting the clutch, observe the RPM or engine sound. When the RPM is appropriate or the engine emits a low sound, slow down the clutch release and gently accelerate. 2. Remember not to let the car roll. During the test, rolling more than 30 cm will result in failure. 3. Before releasing the handbrake, observe the road ahead. If it's an uphill or downhill, press the brake with your right foot and slowly release the clutch. 4. When the car body starts shaking significantly, keep the clutch pedal steady with your left foot, slowly release the brake with your right foot, and fully release the brake once the car starts moving.
11
0
Share

What is the relationship between the steering wheel direction and the car direction?

The steering wheel controls the direction of the rear of the car. When the steering wheel is turned to the left, the rear of the car will turn to the left, and vice versa. This applies to both forward and reverse driving. Related introduction: 1. Introduction: The steering wheel is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. In the 1950s, concept cars without steering wheels were introduced one after another, but consumers were not interested in such cars at all. Because a car without a steering wheel simply cannot be called a car. 2. Composition: The frame is generally made of zinc alloy or aluminum alloy. Some manufacturers are trying to use cheaper and lighter magnesium alloys. The frame is produced by die-casting. A few manufacturers still use steel sheet metal as the frame, which has a complex structure.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.